This hitch-mounted cargo carrier tilts away from your vehicle - with gear loaded - for easy cargo area access, and it folds up for storage when not in use. The spacious basket has side rails that help contain your cargo and provide tie-down points.For motorhome or RV use the e99050 RV bumper cargo carrier instead. The D-shaped pin included with this cargo carrier will not work on Toyota OEM hitches as the pin is not long enough.
We've handled a lot of racks and can confidently say the RV Rider is one of the few that can carry a couple 80-lb fat-tire e-bikes on the back of a motorhome or 5th wheel. It's sturdy, versatile, and a steal for the value it provides.Does not work with bumper-mountedhitch adapters. The RV Rider platform-style hitch bike rack makes it simple to carry 2 electric bikes on the rear of your motorhome, fifth wheel, or flat-towed vehicle.
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Once installation is complete, the connectors will be stowed beneath your vehicle, near the trailerhitch. A mounting bracket is included to keep the connectors secure. It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 7-pole and 4-pole connectors - to help prevent corrosion.
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.
This hitch bike rack makes it easy to take 2 e-bikes to the trail. Ratcheting hooks hold your bikes securely by the frame and lock to deter theft. Wheel hoops adjust for different wheelbases. Anti-rattle system reduces wobble and sway.Do not use a 1-1/4" to 2" hitch adapter. Not rated for use with bumper-mountedhitches. Not intended for front hitch use. Padded, Ratcheting Hooks The Sport Rider SE mast has a pair of ratcheting hooks that hold your bikes securely by the top tube.
Extend the top receiver on your TorkLift SuperHitch dual-receiver trailer hitch to clear obstacles such as your bed-mounted camper. Exclusive, heavy-duty design maintains a high weight capacity and can be used with a weight distribution system.These chains not only provide extra security to keep the extension in place in your hitch, but they also transfer some of the weight back from the extension to your frame-mountedhitch. How to Determine the SuperTruss Length You Need If the camper is mounted on the truck: Measure from the face of the truck's rear bumper to the outside edge of the camper's bumper.
Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.
This heavy-duty, 2-bike rack is perfect for the serious cyclist and occasional riders. It's safe for carbon frames and has a foot pedal that lets you use both hands to tilt for trunk access and fold for storage.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Rated for use on your vehicle, camper, RV, 5th wheel, or trailer Ratcheting hooks hold your bikes securely by the front wheels - no frame contact Pivoting rear wheel cradle with ratcheting strap lets you carry bikes with different wheelbases Front cradles adjust to accommodate smaller bikes or to prevent bike-to-bike contact U-shape frame makes it easier to load than most platform-style racks Foot pedal lets you use 2 hands to tilt and fold the rack Tilts with bikes loaded to access cargo area Tamper-resistant flatlock cam reduces movement of rack in hitch receiver 8-mm Security wrench and hitch pin included Included cable lock deters theft of your bikes Add-on (sold separately) lets you carry 3 bikes Durable steel construction with black powder coat is rust resistant Specs: Application: 2" x 2" trailerhitch receivers Carrying capacity: 2 bicycles Weight capacity (per bike): 60 lbs RV weight capacity: 40 lbs per bike Maximum tire width: 3.0" Maximum wheelbase: 50" Wheel diameter: 18" - 29" Distance between bikes: 11-1/4" Distance from center of hitch pin hole to: Closest part of rack: 6-1/2" Farthest part of rack when unfolded: 37" Farthest part of rack when folded: 14-1/4" Carrier weight: 37 lbs Limited lifetime warranty Note: Hitch must be mounted to the vehicle's frame (chassis), not the bumper.
Extend the receiver on your 2017 or newer Ford Super Duty factory 3" hitch to clear obstacles such as your bed-mounted camper. Exclusive, heavy-duty design maintains high weight capacity and gives you a 2-1/2" receiver.These chains not only provide extra security to keep the extension in place in your hitch, but they also transfer some of the weight back from the extension to your frame-mountedhitch. How to Determine the Cannon Length You Need If the camper is mounted on the truck: Measure from the face of the truck's rear bumper to the outside edge of the camper's bumper.
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. T-connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Once installation is complete, the 7-way connector will be stowed beneath your vehicle, near the trailerhitch. A mounting bracket (sold separately) is recommended to keep the connector secure. It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 7-way connector itself - to help prevent corrosion.
Trying to line up a 5th wheel or trailer in a tight space often means blind spots and a lot of back-and-forth. This wireless electric dolly lets you walk freely around your setup, giving you full visibility and precise control the entire time.When you need to switch to a bumper pull, use the 20" ball mount for any 2" or 2-5/16" coupler. You can also connect using a standard round trailer jack post by sliding it into the dolly's receiver tube, giving you another simple attachment option.
Attach a variety of accessories to the front of your vehicle with this completely hidden, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more. Aluminum and steel alloy construction is sturdy and eco-friendly.Features: Custom-fit, front-mounthitch provides attachment point for hitch-mounted accessories Winch, spare tire carrier, snowplow, cargo carrier and more No more blindly backing trailer in - just hook it up and drive forward Hidden design - hitch is completely out of sight for a clean, from-the-factory look Hitch cross tube is concealed behind your vehicle's bumper Receiver is hidden behind license plate when not in use Easy, bolt-on installation - no drilling or welding required Sturdy, lightweight alloy construction Alloy is made of recycled materials and combines aluminum, steel, and stainless steel Black powder coat finish offers superior rust protection Includes license plate bracket and mounting magnet Meets SAE J684 towing safety regulations Made in the USA Specs: Line pull: 10,000 lbs Vertical load: 1,000 lbs Gross trailer weight: 10,000 lbs Receiver opening: 2" x 2" Pin hole diameter: 5/8" Limited lifetime warranty Completely Hidden for a Clean, Factory Look The EcoHitch Invisi front-mounttrailerhitch is designed to be completely out of sight.
Adjustable trailer receiver hitch designed for use on RVs that can be bolted to the vehicle frame. Powder coated steel is sturdy and corrosion resistant.
Extend the receiver on your Ford Super Duty factory 3" hitch to clear obstacles such as your bed-mounted camper. Exclusive, heavy-duty design maintains high weight capacity and gives you a 2-1/2" receiver.These chains not only provide extra security to keep the extension in place in your hitch, but they also transfer some of the weight back from the extension to your frame-mountedhitch. How to Determine the Cannon Length You Need If the camper is mounted on the truck: Measure from the face of the truck's rear bumper to the outside edge of the camper's bumper.
Easy-to-adjust air bag lets you customize this ball mount to get the smoothest possible ride. Heavy-duty air bag and cushioned bumpers absorb road shock and reduce chucking. 2" (10K) and 2-5/16" (20K) balls included.Fortunately, the Shocker Hitch HD Air will change all that. Air Bag and Bumper Stop Shock Absorption Technology Using a built-in air bag and rubber cushions, the Shocker Hitch HD Air acts like a small suspension system between your truck and trailer.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. Trailer wiring included.To tow with this hitch, you must use the included ball mount attachment. This Stealth Hitchestrailerhitch includes everything you need to hook up your trailer for towing.
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.Features: Protects your truck and towables from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailerMounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection Guards against backsplash - channels on the back direct water flow downward Customizable to your vehicle's specifications for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mud flaps to any length Includes punch tool to create bolt holes in mud flaps for attaching installation clamps Vertical adjustment enables you to maintain consistent ground clearance no matter your load Just loosen 2 bolts and rotate arms up or down, then re-tighten bolts to lock arms into place Horizontal adjustment of support rods allows the mud flaps to fit the width of most trucks Maintains the factory appearance of your vehicle Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Slide the center hub onto the shank of your 2" ball mount or tow bar (sold separately) and tighten it with set screws Durable construction of all components ensures years of service and performance Heavy-duty, 3/8" thick black rubber mud flaps with molded, tear-resistant fabric layer Heavy-gauge, stainless-steel-sleeved support rods with corrosion-resistant coating inside Black powder coated aluminum clamps and stainless steel hardware attach mud flaps to support rods UV-protected, black matte powder coat finish on forged aluminum center hub and arms Includes polished, stainless steel trim plates with "Rock Tamers" logo Rock Screen (sold separately) helps prevent damage from stones, gravel, and debris while traveling Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2" x 2" trailerhitch receiver and ball mount Adjustable width (outside to outside): 67-1/4" to 96-3/4" Mud flap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit 1-Year limited warranty Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailerhitch receiver opening.
This completely hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Receiver easily removes when not in use. Stainless steel receiver resists corrosion.Features: Custom-fit trailerhitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle Hidden design - hitch is completely out of sight for a clean, from-the-factory look Hitch cross tube is concealed behind rear bumper Receiver is removable - unbolts from hitch when not in use Easy, bolt-on installation - no drilling or welding required Stainless steel receiver ensures superior protection against rust and corrosion Sturdy, lightweight alloy construction Alloy is made of recycled materials and combines aluminum, steel, and stainless steel Black powder coat finish offers superior rust protection Meets SAE J684 towing safety regulations Made in the USA Specs: Receiver opening: 2" x 2" Maximum gross trailer weight : 3,500 lbs Maximum tongue weight : 525 lbs Not rated for weight distribution systems Limited lifetime warranty Hidden Design for a Clean, Factory Look The EcoHitch Stealth trailerhitch is designed to be completely out of sight when you're not towing.
Protect your truck and towables from flying rocks and debris with these fully adjustable mud flaps. The heavy-duty rubber flaps slide onto your ball mount or tow bar, and they adjust horizontally and vertically for a custom fit on your vehicle.Features: Protects your truck and towables from damage inflicted by flying rocks and debris Works great when you're towing a boat; snowmobile; ATV; or 5th-wheel, travel or horse trailerMounts near the bumper yet far enough away from the rear wheels to provide a wide range of protection Guards against backsplash - channels on the back direct water flow downward Customizable to your vehicle's specifications for a perfect fit and maximum coverage Pre-molded cut lines let you trim the mud flaps to any length Includes punch tool to create bolt holes in mud flaps for attaching installation clamps Vertical adjustment enables you to maintain consistent ground clearance no matter your load Just loosen 2 bolts and rotate arms up or down, then re-tighten bolts to lock arms into place Horizontal adjustment of support rods allows the mud flaps to fit the width of most trucks Maintains the factory appearance of your vehicle Use them when you're towing - take them off when you're not Installs and removes easily - no drilling or welding required Slide the center hub onto the shank of your 2-1/2" ball mount or tow bar (sold separately) and tighten it with set screws Durable construction of all components ensures years of service and performance Heavy-duty, 3/8" thick black rubber mud flaps with molded, tear-resistant fabric layer Heavy-gauge, stainless-steel-sleeved support rods with corrosion-resistant coating inside Black powder coated aluminum clamps and stainless steel hardware attach mud flaps to support rods UV-protected, black matte powder coat finish on forged aluminum center hub and arms Mud flaps include polished, stainless steel trim plates with "Rock Tamers" logo Rock Screen (sold separately) helps prevent damage from stones, gravel, and debris while traveling Specs: Application: most SUVs, vans, RVs, full-size or dually trucks with a 2-1/2" x 2-1/2" trailerhitch receiver and ball mount Adjustable width (outside to outside): 67-3/4" to 97-1/4" Mud flap dimensions (each): 24-1/4" long x 23-7/8" wide x 3/8" thick Length can be modified to create a custom fit 1-Year limited warranty Note: To use Rock Tamers, there must be at least 1" of clearance between the back of the ball mount face and the trailerhitch receiver opening.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. Trailer wiring included.To tow with this hitch, you must use the included ball mount attachment. This Stealth Hitchestrailerhitch includes everything you need to hook up your trailer for towing.
This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.Features to know about Keep Your Vehicle Looking Clean: Hidden Cross Tube for a Factory Finish A lot of hitches stick out and look bulky under the rear bumper. This one doesn't. The EcoHitch Hidden TrailerHitch Receiver hides the cross tube behind the bumper so only the 2" receiver shows.
Super-affordable tow bar lets you flat tow your vehicle behind your RV or pickup. Universal mounting brackets attach to your vehicle's bumper with no base plate - modification will be required. Arms adjust in width to fit most applications.Features: Tows your vehicle behind your RV or pickup truck using your ball mount Fits almost any vehicle with universal bumper brackets Mounts to flat, metal section of your vehicle's bumper (modification will be required) Eliminates the need for vehicle-specific base plates Adjusts spacing between the arms to fit a wide range of applications Attaches and detaches from the bumper brackets with 2 easy-to-access pins Must be removed from vehicle for storage Arms fold together to save space when not in use Ensures simple, secure hookup and disconnect with a trigger-style coupler latch Safety cables and hitch lock sold separately Made of steel and powder coated to resist corrosion Specs: Application: 2" hitch ball Weight capacity: 5,000 lbs Adjustable arm width: 26" to 41" Coupler lock pin hole diameter: 1/4" Mounting pin diameter: 1/2" Bumper bracket dimensions: 5-1/2" long x 2" tall Distance between mounting holes center to center: 4" Distance between tabs: 2" Weight: 31 lbs 1-Year limited warranty Budget-Friendly Tow Bar Keeps It Simple You don't need to spend a fortune to get a tow bar that's going to work for you.
Bolt and weld this heavy-duty hitch plate onto your truck to get a 2-1/2" tube for towing. Made to fit Ford F350, F450, and F550 cab and chassis trucks with 34" wide frames. Built-in, bottom-mounted ICC bumper provides underride protection.Features: Heavy-duty hitch plate lets you tow with your cab and chassis truck (2) 5/8" D-ring attachments let you easily connect safety chains to your truck Pre-punched hole makes it easy to mount your trailer connector (sold separately) Bottom-mounted ICC bumper provides underride protection Heavy-duty steel construction with corrosion-resistant black powder coat finish Bolt-on and weld-on installation Attaches to truck's frame with (2) 5/8" Grade 8 bolts (not included) on each side Weld around the outside of each frame rail to secure the plate to your truck's frame Requires a minimum weld size of 5/16" to maintain proper rigidity and structural integrity Made in the USA Specs: Application: 1999 and newer Ford F350/F450/F550 cab and chassis trucks Cannot be used on standard pickup trucks Receiver tube size: 2-1/2" Plate dimensions: 34" wide x 17-1/4" tall x 1/2" thick Gross towing weight: 20,000 lbs D-ring thickness: 5/8" Bumper length: 62" Mounting hole spacing for pintle hook: Vertical: 1-3/4" apart on center Horizontal: 3-3/8" apart on center Weight: 124 lbs
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. Connector plugs directly into existing tow connector on your truck - limited cutting, splicing, and tapping required.After plugging in the connector, route the 7-way end of the harness along the inside of your bumper toward the center of your vehicle. Once installation is complete, the 7-way connector will be stowed beneath your vehicle, near the trailerhitch.
Filters
