Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
On Dexter axles manufactured after April 2001 you will be able to find the serial number stamped on the rear portion of the axle tube approximately 18" from the passenger side hub. Depending on the condition of the axle you may need some chalk…
view full answer...We do have the correct repair kit for your coupler as the Demco Coupler Repair Kit #DM5696 will only work on the leverlock 2" coupler or model DA66 brake actuator. The Trigger Latch Repair Kit for A-Frame Couplers #CA-5100-RK is the correct…
view full answer...For your Optronics light part as2t216 we have found that the correct replacement lens is the part #AST60B.
view full answer...The Bulldog Winch Rear Wiring Kit part #BDW20207 would allow you to power a winch from the back of a truck or on a car trailer no problem using the vehicle's battery. The leads attached to the quick connect would go from the winch to the battery…
view full answer...It comes down to the length and capacity that will work the best for you. The part #BDW20311 is 8 foot and has a 19,000 lb capacity, the part #BDW20310 is 5 foot and has a 13,000 lb capacity, and the #BDW26FR is 8 foot and has a 15,000 lb capacity.…
view full answer...I went out to the warehouse and checked our stock of hub and drum #84656uc3. All of the units are just as you have described and the races are installed correctly. If you are looking at the inner race from the back side of the hub and drum, there…
view full answer...Based off of my research, you can use the Replacement Caliper for Titan 10" Brakes #K71-773-02 for the passenger side, and the Replacement Caliper for Titan 10" Brakes #K71-773-01 for the driver's side, will work for you. These come…
view full answer...We do have the correct brake assemblies you are needing for your Dexter 12k axles that has 5 inch wide assemblies that attach with a 6 lug bolt pattern. The best option is the etrailer.com assemblies part #AKEBRK-12 that come with both sides. The…
view full answer...I contacted the manufacturer regarding your question about the AMP rating for the Bulldog Winch Power Leads, Power, and Ground for Truck Winch #BDW20140. While they did not provide me with an actual rating, they did say that 500 AMPs was a ton but if…
view full answer...I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…
view full answer...Yes, the Demco Spare Tire Carrier part #DM15851-76 does work great with the tire size ST235/80R16 that you referenced. We had a customer with your exact tire size send us a picture of it carrying the wheel which I attached.
view full answer...The locking storage box #M387FR mounts in the floor. As long as you have the 19" wide x 29" long x 7-1/4" deep space, it can absolutely work in a toyhauler. The box recesses into the floor and is powder coated for protection against…
view full answer...Filters
- 527 results
Related Searches