Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. The included 85-degree and 95-degree brackets install on an angled or V-shaped boat trailer frame with 2 U-bolts (sold separately).Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 85-Degree and 95-degree angles are designed for vertical mounting onto angled or V-shaped boat trailer frames Ensures alignment of the bunk board mounting holes Requires (2) 1/2" diameter U-bolts (sold separately) for installation 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Overall dimensions: 85-Degree bracket dimensions: 6" tall x 5" wide 95-Degree bracket dimensions: 7" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/16" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boat trailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). ... Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 90-Degree angle for vertical mounting onto level boat trailer frames (2) 1/2" Diameter U-bolts (sold separately) required for installation 4 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Dimensions: 8" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
... Includes 2 brackets.Multiple holes in the brackets make it easy to adapt to the different heights of trailer frames and also to ensure that the roller will be mounted at the proper position.
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.Features: L-shape brackets accommodate a variety of different roller lengths Mount to your boat trailer's frame or tongue Sturdy, 7-gauge galvanized steel construction resists corrosion Made in the USA Specs: Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft Diameter of mounting holes (each): 3/8" Quantity: 1 pair Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). ... Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 90-Degree angle for vertical mounting onto level boat trailer frames (2) 1/2" Diameter U-bolts (sold separately) required for installation 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Dimensions: 6" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Hey Andrew, thanks for reaching out! The flat tow wiring will need to be spliced in on the vehicle side of your 2025 Ford Bronco wiring, and then I recommend picking up one of the Tekonsha trailer harnesses that then tees in between the vehicle and…
Hi Dave, welcome back! That does sound like the standard 14" x 14" opening, maybe just a tad off. I'm sure your old vent was designed for the same opening size so you won't have any issues adding in a new vent like the MaxxAir…
When replacing the fenders on your 2016 R-Pod 178 you want to choose a replacement that is as close as possible to your existing fenders. Although slightly shorter, the Single Axle Trailer Fender for Enclosed Trailer - Ribbed Steel - 13" to…
The Reese Elite Series under bed puck system, part #RP87FR is compatible with your 2017 Ford F250. The puck spacing is identical to hat of the Ford OEM system, so you'd be able to use any puck mounted hitch designed for the Ford OEM tow/prep…
We have exactly what you need, Don! The Reese underbed puck system is exactly what Ford would have put in you 2025 F-350 from the factory. There is an additional part needed depending on if you have the factory welded inner frame brackets or not. I…
Yes Happijac has confirmed that the HappiJac Truck-Mounted Camper Tie-Downs #LC182910-182971 is a confirmed fit for a 1988 Chevy C30 1 ton dually like you have.
To replace the fender on your 2022 Arising Ind. cargo trailer I recommend the following: - CE Smith Single Axle Trailer Fender #CE17100ATB To install this on your trailer you'll need mounting brackets light part #CE26098G-2 as well as mounting…
In order to find the correct replacement leaf spring for a trailer you first need to start by noting the type whether that be slipper or double eye. Then, you'll need to measure their unloaded length via jacking up the trailer. If the springs are…
The The Brophy Camper Tie Downs #TDSF, are a universal fit kit intended to fit as many trucks as possible. While there is nothing to say that it for sure fits, looking at your pictures it seems likely that it will work for your 1968 Ford F-250 Camper…
Hey Andy! The best wiring harness for your 2024 Toyota RAV4 is going to be the Curt item #C56434. This custom-fit T-connector plugs into your RAV-4's factory wiring harness, which is located behind the driver's-side and passenger's-side…
Hey Eric, thanks for reaching out! The Triton 12420-P is for a 1" diameter spindle which means you need the Bearing Kit for 1" BT8 Spindle #BK1-100. This doesn't include the replacement grease cap or grease, but it does have the main…
There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle,…
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Works With Aluminum Trailers: Sturdy support that pairs well with aluminum frames and I-beam layouts. Supports One Bunk Board: Includes 2 brackets for a complete vertical bunk setup. Features to know about Vertical Bunk Brackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides, and these brackets keep those bunks locked in place.
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Supports One Bunk Board: Includes 2 brackets for a single bunk installation. Features to know about Bolster Brackets for Boat Trailer Bunk Boards These bolster brackets let you mount and fine-tune the height of your trailers bunk boards so the boat sits evenly and loads smoothly.
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Works With Aluminum Trailers: Sturdy support that pairs well with aluminum frames and I-beam layouts. Supports One Bunk Board: Includes 2 brackets for a complete vertical bunk setup. Features to know about Vertical Bunk Brackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides, and these brackets keep those bunks locked in place.
Replace the standard rubber spool roller on your boat trailer with this thermoplastic rubber version from Yates. TPR material is stronger than rubber and softer than polyurethane, and it won't leave marks on your boat.Features: Replaces 1 spool roller on your boat trailer Fits a 4" wide bracket with a 5/8" diameter shaft Eases loading and unloading of boat Supports keel of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Made in the USA Specs: Overall length: 3-3/4" Overall diameter: 3" Outer diameter of center hole: 5/8"
... Corrosion- and impact-resistant plastic fenders are designed for single-axle trailers and are perfect for marine applications. Fenders fit 13-15" wheels and install with included brackets.Features: Designed for single-axle trailers Works great for marine applications Constructed of white plastic Corrosion and impact resistant Provides 3 convenient steps - front, rear and top Includes 4 installation brackets (PF1135-BKT-2) Installation hardware not included Made in the USA Specs: Application: single-axle trailers with 13" - 15" diameter wheels Weight capacity: 200 lbs each Dimensions: 11-5/16" wide x 45" long x 13" tall Fenders are 32-3/4" long, less the end steps Qty: 2 fenders and 4 mounting brackets Step dimension: 6" wide
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Supports One Bunk Board: Includes 2 brackets for a single bunk installation. Features to know about Bolster Brackets for Boat Trailer Bunk Boards These bolster brackets let you mount and fine-tune the height of your trailers bunk boards so the boat sits evenly and loads smoothly.
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Supports One Bunk Board: Includes 2 brackets for a single bunk installation. Features to know about Bolster Brackets for Boat Trailer Bunk Boards These bolster brackets let you mount and fine-tune the height of your trailers bunk boards so the boat sits evenly and loads smoothly.
You plug in your trailer and the connection holds steady, no flickering lights, no loose fit. It replaces worn or damaged sockets so your wiring stays consistent every time you hook up.Highlights 7 Way Blade Socket: Standard vehicle-side connector for trailer wiring. Integrated Mounting Bracket: Secures socket to a fixed mounting point. Plastic Protective Cover: Helps prevent debris and moisture buildup. Short Circuit Design: Internal layout helps reduce electrical faults. 7 Terminal Configuration: Supports lighting and auxiliary trailer circuits.
Easily raise or lower your boat trailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, overslung axle - springs sit over axle For tandem axle applications, use 2 kits Capacity: 500 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 70 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2" Limited lifetime warranty 30-Day satisfaction guarantee Note: Does not work with spring plates wider than 4-1/4".
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, overslung axle - springs sit over axle For tandem axle applications, use 2 kits Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 5-5/16" - 6-1/2" Limited lifetime warranty 30-Day satisfaction guarantee Note: Does not work with spring plates wider than 4-1/4".
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 3,000-lb to 5,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 500 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 4" tall x 4" diameter Compresses up to 70 percent of original height with full memory rebound Required clearance between top of spring pack and bottom of trailer frame: 6" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
Need a complete rear light setup for your RV? This combination light includes stop, turn, tail, and license functions in 1 unit. It installs easily and provides reliable lighting for safe, everyday use.Features: Combination light designed for stop, turn, tail, and license functions Rectangular design includes license light and mounting bracket for a complete setup Surface mount design for RV rear applications Incandescent lighting for consistent performance White base for a clean, standard look Popular for RV applications Meets DOT lighting requirements Easy installation for quick setup Includes 1 combination light Specs: Color: Red and clear Dimensions: 8-9/16" x 4-5/8" Light type: Incandescent
Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.Features: Improves suspension, handling and safety Provides additional support as needed so you always have a smooth, comfortable ride Allows the leaf spring ample movement while cushioning light loads Becomes more rigid as more weight is added Increases stability, providing great performance while hauling heavy loads Raises trailer ride height Works independently side-to-side Helps compensate for off-center loads Reduces body roll when swerving and turning corners Works to eliminate trailer sway Acts as shock absorbers, taking the brunt of bumps and rough roads Reduces load on leaf spring assembly Extends the life of your trailer's suspension Designed to work with a suspension system that is in good working order 2 Jounce-style springs, line relocation bracket, mounting brackets and hardware are included Maintenance-free - no tubing to run or air pressure to monitor like with air springs Simple, no-drill installation Made in the USA Specs: Application: 5,000-lb to 8,000-lb single, underslung axle - springs sit under axle For tandem axle applications, use 2 kits Fits 1-3/4" wide spring packs Capacity: 900 lbs at 50 percent compression Do not exceed the trailer's weight-carrying capacity Spring dimensions: 5" tall x 4" diameter Compresses up to 65 percent of original height with full memory rebound Required clearance between top of spring plate and bottom of trailer frame: 7-7/16" - 8-5/8" Limited lifetime warranty 30-Day satisfaction guarantee
... Great White series features custom-cut lens optics and ultra-bright white diode. Surface mount to trailer with included bracket. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate Great White series features custom-cut lens optics and ultra-bright white diode for increased light output LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable black housing Clear lens over white LED Compatible with 12V DC systems Surface mount to trailer with built-in license plate bracket - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Made in the USA Specs: Dimensions: 8-5/8" long x 3-1/4" tall x 1-15/16" deep Distance between mounting holes (center on center): 3-1/2" Diodes: 1 10-Year limited warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
Filters
