Result: boat_frame_rails

Prevent water from pooling in your pontoon boat's cover with this complete support kit. Support poles, pads, and 12' straps work together to create a frame for your boat cover to rest over, allowing it to shed water and debris easily.Just buckle the 12' polypropylene straps to the support pads, then attach the straps' hooks onto your pontoon boat's rails. Snap the support poles into the center of the pads to raise the frame, then adjust the straps and poles until the frame is taut.

• Boat Covers
• Supports
• Taylor Made

Mount this durable poly plastic pad to your boat trailer's frame or axle to add a layer of protection between the frame or axle and your boat.You can even mount them on the frame rails to protect your boat's finish.

• Guards and Pads
• Crossmember Pad
• CE Smith
• 10 Inch Long

Bike to the water with your kayak, SUP, or surfboard instead of searching for parking. The Reacha Sport carries long gear behind your bike and becomes a hand cart for the last stretch, making shoreline access more convenient.With side rails (bows) included for stability, it corrals long and bulky loads that normally force you into a vehicle. And because the frame uses snap-lock connectors, assembling or breaking the trailer down requires no tools and take only a few minutes.

• Bike Trailer
• Thule
• Black

Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.

• Guides
• Bunk-Style Guide
• CE Smith
• 60 Inch Long

Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the rollers correctly matches the width of your boat.

• Guides
• Roller-Style Guide
• CE Smith
• 15 Inch Tall

These guide-on posts make it easy to load your pontoon boat onto your trailer. They attach to the rear of your trailer and extend out of the water, providing a visual target to center the boat's pontoons around. Mounting hardware included.The galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.

• Guides
• Post-Style Guide
• CE Smith
• 22 Inch Tall

Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.The built-in LED lights on the posts stand out at night, making it easier for you to load your boat in the dark and for other drivers to see your trailer when you're on the road. The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail.

• Guides
• Post-Style Guide
• CE Smith
• 60 Inch Tall

Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.The built-in LED lights on the posts stand out at night, making it easier for you to load your boat in the dark and for other drivers to see your trailer when you're on the road. The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail.

• Guides
• Post-Style Guide
• CE Smith
• 40 Inch Tall

Replaces 1 upright tube for CE Smith bunk-style guide-ons for boat trailers (CE27640 and CE27760). Lance prevents rotation of PVC posts. Mounting hardware (CE11452-A) sold separately.Features: Replaces upright tube for CE Smith bunk-style guide-ons for boat trailers Fits models CE27640 and CE27760 Support post clamps onto top or bottom of trailer frame Mounting hardware (CE11452-A) sold separately Lance prevents rotation of PVC posts Pre-galvanized 16-gauge steel construction resists corrosion Specs: Post dimensions: 39" tall x 1-1/2" wide Bend degrees: 90 Quantity: 1 post This pre-galvanized steel support post mounts horizontally on top of or below your trailer's frame rail.

• Boat Trailer Parts
• Guide-On Parts
• Uprights
• CE Smith

Replaces 1 upright tube on your CE Smith bunk-style guide-ons for boat trailers (CE27660 and CE27600). Mounting hardware sold separately.Features: Replaces 1 upright tube on your CE Smith bunk-style guide-ons for boat trailers (CE27660 and CE27600) Support post clamps onto top or bottom of trailer frame Mounting hardware sold separately Pre-galvanized steel construction is sturdy and resists corrosion Specs: Post dimensions: 18" tall x 1-1/2" wide Length of upright from top of tube to beginning of bend: 17" Length of horizontal tube to beginning of the upright portion: 16" Bend angle: 75 degrees This pre-galvanized steel support post mounts horizontally on top of or below your trailer's frame rail.

• Boat Trailer Parts
• Guide-On Parts
• Uprights
• CE Smith

Replaces 1 upright tube for CE Smith bunk-style guide-ons for boat trailers (CE27620, CE27670, and CE27740). Lance prevents rotation of PVC posts. Mounting hardware (CE11452-A) sold separately.Features: Replaces upright tube on your CE Smith bunk-style guide-ons for boat trailers Fits models CE27620, CE27626, CE27670, and CE27740 Support post clamps onto top or bottom of trailer frame Mounting hardware (CE11452-A) sold separately Lance prevents rotation of PVC posts Pre-galvanized 16-gauge steel construction resists corrosion Specs: Post dimensions: 18" tall x 1-1/2" wide Bend degrees: 90 Quantity: 1 post This pre-galvanized steel support post mounts horizontally on top of or below your trailer's frame rail.

• Boat Trailer Parts
• Guide-On Parts
• Uprights
• CE Smith

Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.

• Guides
• Bunk-Style Guide
• CE Smith
• 24 Inch Long

This durable fender keeps your pontoon boat from bumping into the dock while you're on the river or lake. Fender inserts between your boat's pontoon and deck for a tight, snug fit. Marine-grade vinyl resists UV damage.Features: Inflatable fender attaches to your pontoon boat to prevent damage to the hull and pontoon Cushions impacts with piers, buoys, or docked boats Contoured shape fits snugly between your boat's deck and pontoon float Molded ridge hooks grip your boat for a tight fit Included straps secure fender to your boat's frame or railing Included shackle creates anchor point for fender Marine-grade vinyl is durable and UV resistant Easy to inflate with hand pump (3691005 - sold separately) Integrated valve won't chip off or unglue Silver color matches the aluminum on your boat Made in the USA Specs: Dimensions: 16" tall x 9" wide x 8-1/2" thick Eyelet diameter: 11/16" Strap dimensions: Large strap: 8" long x 1" wide Small strap: 5-1/2" long x 1" wide

• Pontoon
• Inflatable
• 10 - 15 Feet Long
• Taylor Made
• 11 - 20 Inch Long
• Silver
• Vinyl

This durable fender keeps your pontoon boat from bumping into the dock while you're on the river or lake. Fender inserts between your boat's pontoon and deck for a tight, snug fit. Marine-grade vinyl resists UV damage.Features: Inflatable fender attaches to your pontoon boat to prevent damage to the hull and pontoon Cushions impacts with piers, buoys, or docked boats Contoured shape fits snugly between your boat's deck and pontoon float Molded ridge hooks grip your boat for a tight fit Included straps secure fender to your boat's frame or railing Included shackle creates anchor point for fender Marine-grade vinyl is durable and UV resistant Easy to inflate with hand pump (3691005 - sold separately) Integrated valve won't chip off or unglue White color Made in the USA Specs: Dimensions: 16" tall x 9" wide x 8-1/2" thick Eyelet diameter: 11/16" Strap dimensions: Large strap: 8" long x 1" wide Small strap: 5-1/2" long x 1" wide

• Pontoon
• Inflatable
• 10 - 15 Feet Long
• Taylor Made
• 11 - 20 Inch Long
• White
• Vinyl

Bike toward the shore with your kayak, SUP, or board in tow. The Thule Reacha Sport Beach trailer handles uneven paths and deep sand with fat tires, then transforms into a hand cart for the last stretch, making shoreline access more convenient.The extended drawbar adjusts to carry gear up to 14' 9" long, and the trailer supports up to 77 lbs by bike and 132 lbs as a hand cart. With side rails (bows) included for stability, it keeps long or stacked loads secure on uneven ground. And because the frame uses snap-lock connectors, assembly and breakdown are tool-free and take only a few minutes.

• Bike Trailer
• Thule
• Black