To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you need to keep your gear safe from both thieves and storms, this cover delivers. The RetraxONE XR is built from a single piece of Lexan polycarbonate reinforced with 5/8" thick aluminum I-beams spaced every 4-3/4". It can handle up to 200 lbs of evenly distributed weight and performs in temperatures from -50°F to 200°F without cracking or warping. The matte black finish is UV- and scratch-resistant, while weather stripping and foam seals around all edges keep rain, snow, and dust out of the bed so your cargo stays dry and protected.
Getting to your cargo shouldn’t be a fight with straps or snaps. This manual retractable tonneau rides on sealed ball-bearing rollers, so it glides open and closed without lubrication or binding. You can secure it at any point along the rails with the built-in locking handle—great for covering smaller gear up front while hauling taller items in the back. When fully opened, the cover rolls into a compact 13-1/2" deep by 12" tall canister with a spiral track system that keeps the slats from rubbing together. The angled bottom of the canister leaves more room underneath for tools or long cargo.
Hauling bikes, kayaks, or ladders is easy thanks to the integrated Trax Rail System. The accessory T-slots accept most T-slot-compatible racks from Thule, Yakima, and Rhino-Rack, letting you mount crossbars or a ladder rack above the cover without interfering with its movement. You can keep the bed secured with the cover closed while still carrying extra gear on top, freeing up space inside for other cargo.
A cover that works hard doesn’t have to look bulky. The RetraxONE XR sits just 1" above the bed rails for a clean, flush appearance. The flat locking handle and overlapping front panel give the cover a smooth, streamlined fit that reduces wind drag and can even help improve fuel economy. It also leaves enough clearance for most fifth-wheel setups or bed cargo systems to stay in place underneath.
There’s no drilling, no springs, and no pull straps to adjust. The rails clamp directly to the bed rails, and the pre-assembled canister drops into place with just a few bolts. Two included drain tubes route water through the bed’s factory drain holes, keeping the canister dry inside. Once installed, the RetraxONE XR is fully self-contained and maintenance-free—just slide it open or closed, lock it where you want, and go.
Ratings & Reviews
Looks good and feels sturdy
Awesome product as it was easy to insta ll!
Still works great. Been outside in the elements for a year. Looks and functions great.
The install is complete. I'd prefer a hard copy of the directions. The little point and shoot QR code took me to the wrong cover. After a little work I did find the correct one. This added a good 30 minutes to the install time. Little trouble with the adjustment. I might have to adjust a little more in the days to come. I'm conservative with the 4 star rating. Time will tell, could move to 5. The MAJOR concern...the delivery company delivered it to the wrong address. Thankfully I have honest neighbors otherwise someone would have been out $[XX].
I'd have a conversation with the delivery company if I were y'all.
perfect fit. solid build. Fast shipping
Product very good. Drain plugs could fit better keeps popping out
Installation went well. Quality workman ship.
E trailer is great. But when the cover arrived and I installed it the cover had a hole in it or a small flaw
I have seen this product on other trucks and liked it. It was fairly easy to install(some good videos on[line]) my son helped me, two people make it go faster and easier. Thanks for the good service and price.
Looks very sharp and fits well on my 2022 Silverado 1500 5'8" bed, and the fits well with Rihno Rack heavy duty crossbars 65" long.
Shipping was fast. Everything arrived in tact.
The instructions for the cover were fairly easy to follow and it fit our 2023 Canyon Denali with a spray in bedliner perfectly.
Works good overall. Opens, closes and locks very well. I get some water coming in on the sides , driving in the rain. Not pleased with the connections on the drain tubes. I have had to glue them in more than once, even during initial install. I did not like the fact that I had to drill those 1/2" holes in the bed for them as well.
Fantastic cover. Perfect for my needs. Performs better than I imagined it would. Ability to access bed instantly with supplies... Yakima rack on/off in literally less than two minutes. Drive a black limited Tacoma. Perfect match for this truck. From sleek to bound for the trails in no time.
The product quality is very good, and I anticipate many years of useful service. Regrettably, the assembly directions are somewhat superficial. Identifying hardware (i.e.: screw size, color, etc.) is particularly challenging as there is not an actual size comparison chart. Properly aligning the product was also very difficult, multiple attempts were required.
Very good quality tonneau cover and it just glides when opening and closing. Installation was super easy too.
Pretty decent cover and installation was reasonable. I’m still not sure how water resistant it will be but we will see. It is replacing a folding cover and thus far it is easier to use. I’ll have to see if it is worth the space trade off but I didn’t like the rear window being blocked when the folding cover was open.
Piece of junk. It ripples in the wind like a tarp over the back of the pickup. The canister does not roll up without having to be forced it in, mostly due to the ripples from driving down the highway. 2 stars because it could work well, the parts and design, if the actual cover were designed for the use it is intended for.
etrailer had excellent communication and the cover came in sooner than expected. The Retrax cover was flawless and had excellent instructions for easy installation!
Excellent shipping. No damage. Installation instructions were easy to follow. No complex tools needed. Lightweight product. Easy lifting and maneuvering into position.
Everybody at etrailer have always provided excellent customer service. Thank You,
I spent more time getting the cover aligned than assembling and getting it onto the truck bed rails. The instructions are very good. I had to adjust the top jaws of the all the rail clamps since I have the T-slot XR rail system. I used a thin piece of cardstock to check for unwanted clearance between the jaw and truck bed flange. Since I didn't have a very large drill bit, I used a Dremel sanding bit to enlarge the pilot hole that I drilled through the plastic bed plug for the drain tube. That worked fine. The cover looks great and seems to operate well on this first day of installation and use. The T-slot rails do not get in the way of using the hand-holes for the rear step bumper.
So far I have about 10000 miles on this set up and the Retrax cover has been great, love being able to keep prying eyes off my gear and water infiltration has been minimal. This is the plastic version and seems to be holding up fine to the elements thus far…time will tell, there is a slight loss of cargo space with this unit installed but it hasn’t been an issue for me. I am very happy overall to this point.
The install was very easy but definitely a two man operation. The section that holds the rolled up cover is pretty large so you do lose some space. That section is also is fairly thin walled. I have dented and scratched it pretty good but it doesn't affect its function. I put one of those cargo load bars across the bed in front of it to try and stop that. I did have it "rack" a little after some rough drives which can cause it to bind a bit when rolling up. But it always closed on the second or third try. And its easy to straighten up again if needed. No water has gotten in the bed and it sure makes grocery getting a whole lot easier. I think its great.
Great accessory for our F-150. Installation isn't too bad if you just take it slow and double-check everything as you go. Looks are top-notch, and the functionality has been excellent. Gives us an extra sense of security being able to lock the cover when needed. You lose a small amount of bed space, but so far it hasn't caused any problems for us. Did I mention it looks great?
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.