Before you tow, press the test button to confirm the breakaway battery is ready. The built-in charger keeps it charged while connected to the tow vehicle, so the kit is ready if separation happens.Weather-Shedding Case: Helps protect the battery from rain and debris. TowTether Safety Cable: Creates a dedicated breakaway cable anchor. Specs Breakaway Kit: Kit type: side-load breakaway kit Breakaway cable length: 4' Charger amperage: 1 amp Included components: breakaway switch, charger, battery, battery box, wiring, wire loom Battery: Voltage: 12V Type: lead-acid Capacity: 5 amp-hours Battery Box: Dimensions: 3-3/4" long x 6" wide x 5" tall Material: plastic Lid seal: rubber O-ring Drainage: bottom drain holes Lock compatibility: padlock compatible, padlock sold separately TowTether Safety Cable: Quantity: 1 cable Material: braided stainless steel Working load limit: 150 lbs Length: 19" Thickness: 3/32" Brake system compatibility: electric or hydraulic Compliance: FMCSA 393.43 compliant for trailer breakaway systems
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.Features: Makes sure your trailer safely stops if it ever separates from your vehicle Activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case allows easy access to the battery Switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Wiring diagram is printed on the battery box lid Rubber O-ring in the lid helps keep water out of the box Drain holes in the bottom of the box help with venting and letting condensation drain Kit includes breakaway switch, charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Voltage: 12V Type: Lead-acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. ... Built-In Battery Charger and Tester The integrated charger keeps the included battery charged and ready to go. At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. ... Built-In Battery Charger and Tester The integrated charger keeps the included battery charged and ready to go. At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status.
This complete breakaway kit brings your trailer to a safe stop by activating the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges the included battery while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Battery box can be mounted on your trailer frame so you can open it from either above or the side Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on the box Kit includes breakaway switch, 0.5-amp charger, 5-amp-hour battery, battery box, and wiring Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 0.5 amps Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 5-1/4" long x 5" wide x 3-1/2" tall 1-Year limited warranty
Unit flashes the lights on your single- or tandem-axle trailer while also activating its brakes if it disconnects from your vehicle. This way, not only will your trailer stop, but the flashing lights will also alert others on the road to the danger.Built-In Battery Charger and Tester The integrated charger keeps the included battery charged and ready to go. At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Highlights Simple Setup: Plug the transmitter into your vehicles 4-way to send signals wirelessly. Battery Powered: Lamps run on batteries, so no wiring to the trailer is needed. Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle.
Use with your Dexter electric-over-hydraulic brake actuator to bring your single- or tandem-axle trailer to a stop should it become disconnected from your tow vehicle. System includes charger that maintains battery.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Designed for use with Dexter electric-over-hydraulic brake actuators (K71-650 and K71-651) Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Mounts to the inside of your trailer's frame or camper compartment Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakaway switch, wiring, and breakaway cable Department of Transportation (DOT) compliant Made in the USA Specs: Application: single- and tandem-axle trailers Battery: Voltage: 12V Type: sealed lead acid Capacity: 9 amp-hours Breakaway cable length: 46" Breakaway switch dimensions: 3" long x 1-1/2" wide Breakaway switch lead wire length: 45" Charger lead wire length: 14" Battery box dimensions: 6-5/16" long x 3-3/4" wide x 5-3/4" tall Battery box mounting hole spacing: From center-to-center vertically: 3" From center-to-center horizontally: 7" Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Bring your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. Includes a charger that maintains battery so you're always ready for an emergency and U-bolts so you can mount it to your trailer jack.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Mounts to the outside of your trailer's frame or to your jack post Side-loading case provides easy access to battery Mounts to jack post with included U-bolts or to trailer frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Rubber O-ring helps keep water out of the box Includes breakaway switch, battery box, wiring, and a 5-amp hour, lead-acid battery Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailer with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Charger lead wire length: 47" Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 12" Battery box dimensions: 5" long x 5-1/4" wide x 3-3/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
The battery case in this breakaway kit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Clamps around your trailer's frame or jack post Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakaway switch, wiring, installation hardware, and breakaway cable Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 46-1/2" Charger lead wire length: 17" Battery box dimensions: 5" long x 4" wide x 3-1/4" tall Trailer jack mounting hole diameter: 2-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
If your trailer breaks away from your tow vehicle, your brakes won't work unless they have power. This kit adds a battery and switch to keep the brakes working, and it's required by law on most trailers with EOH disc brakes.Specs Application: single-, tandem-, and triple-axle trailers Compatibility: Deutsche Hydrapro Alpha G1000 and G1600 Required by DOT for most trailers with EOH systems Battery: Type: 12V sealed AGM deep-cycle battery Capacity: 10 amp-hours Recharge method: 12V tow vehicle circuit Breakaway Switch: 2-wire normally open circuit Activates actuator when pin is pulled Construction: Battery case: injection-molded plastic Switch housing: molded polymer with stainless steel hardware Leads: 16-gauge color-coded wiring Kit Contents: 10 Ah AGM battery Breakaway switch with pin 2-amp charging circuit LED battery tester Installation Notes: Mount the battery box on the trailer frame and connect the yellow wire to the actuator's breakaway circuit.
The battery case in this breakaway kit can clamp around your trailer frame or jack post. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Clamps around your trailer's frame or jack post Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, battery box, breakaway switch, wiring, installation hardware, and breakaway cable Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 44" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 16-1/2" Battery box dimensions: 5" long x 3-1/4" wide x 3-7/8" tall Trailer jack mounting hold diameter: 3" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
You're wiring a trailer with electric brakes and safety isn't optional. This breakaway kit gives the trailer with a backup plan. If it comes loose, the battery triggers the brakes. It's got everything you need to stay in control.Highlights Complete Kit: Includes battery box, battery, charger, switch, and mounting hardware. Automatic Brake Activation: Engages trailer brakes if disconnected from tow vehicle. 12V Rechargeable Battery: Powers the breakaway system independently.
... Breakaway system brings your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. Includes sealed, lead-acid battery, and side-loading case.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Mounts to the outside of your trailer's frame or to your jack post Side-loading case provides easy access to battery Mounts to jack post with included U-bolts or to trailer frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Rubber O-ring helps keep water out of the box Includes breakaway switch, battery box, wiring, and a 5-amp hour, lead-acid battery Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 14-1/2" Battery box dimensions: 5" long x 3-3/4" wide x 3-3/8" tall Battery box mounting hole spacing: From center to center vertically: 2-7/8" From center to center horizontally: 4-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Simple, push-to-test button lets you check the charge on the battery in this breakaway kit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Push-to-test button lets you check the battery's state of charge LED lights indicate current battery status Green = fully charged Yellow = charging Red = recharge needed Top-loading case is easy to access from above Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Wire loom neatly contains and protects wires Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 4-3/4" long x 6" wide x 4-7/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
LED tester lets you easily check the battery's charge. The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.Built-In Battery Charger and Tester The integrated charger keeps the included battery charged and ready to go. At any time, if you would like to see what the state of the rechargeable battery is, just push the green button and LEDs will light up to indicate the battery's status.
Before you tow, press the test button to confirm the breakaway battery is ready. The built-in charger keeps it charged while connected to the tow vehicle, so the kit is ready if separation happens.Weather-Shedding Case: Helps protect the battery from rain and debris. TowTether Safety Cable: Creates a dedicated breakaway cable anchor. Specs Breakaway Kit: Kit type: top-load breakaway kit Breakaway cable length: 4' Charger amperage: 1 amp Included components: breakaway switch, charger, battery, battery box, wiring, wire loom Battery: Voltage: 12V Type: lead-acid Capacity: 5 amp-hours Battery Box: Dimensions: 3-3/4" long x 6" wide x 5" tall Material: plastic Lid seal: rubber O-ring Drainage: bottom drain holes Lock compatibility: padlock compatible, padlock sold separately TowTether Safety Cable: Quantity: 1 cable Material: braided stainless steel Working load limit: 150 lbs Length: 19" Thickness: 3/32" Brake system compatibility: electric or hydraulic Compliance: FMCSA 393.43 compliant for trailer breakaway systems
... Batteries connect in parallel.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Provides enough power to meet or exceed the 10-amp requirement of the BrakeRite EHB and BrakeRite II Maintenance-free gel cell batteries can be used in nearly any position without leaking Tolerates heat better than other types of batteries Mounts to the inside of your trailer frame or camper compartment Top-loading cases provide easy battery access Switch installs with self-tapping screws (sold separately) Protects batteries from rain and debris with durable, plastic cases Includes 2 batteries, 2 battery boxes, and a breakaway switch Department of Transportation (DOT) compliant Specs: Application: trailers with BrakeRite EHB or BrakeRite II system Battery: Voltage: 12V Type: sealed gel cell Capacity: 10 amp-hours Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 48" Battery box dimensions: 6" long x 3-1/2 wide x 5-7/8" tall Battery box mounting holes: Center to center vertically: 2-1/2" Center to center horizontally: 6-5/8" Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Your trailer won't stop fast enough when you brake, especially on hills or in traffic. Upgrading to disc brakes fixes that. This kit includes everything you need to run EOH brakes without the signal errors and lag that cause most systems to fail.This kit gives you the actuator, sealed harness, battery, switch, and junction box, all built to work together. It takes one of the hardest parts of a disc brake upgrade and makes it straightforward.
Replaces the 5-amp-hour battery from your Bright Way trailer breakaway kit.Features: Replaces the 5-amp-hour battery from your Bright Way trailer breakaway kit Fits models 2308, 2326, 2336, 2337, 2339, 2345, 2346, and 2354 Sealed lead-acid battery Specs: Amperage: 5 amp-hours Voltage: 12V Quantity: 1 battery
Replaces the 12-volt battery that came with your Curt breakaway kit. This battery powers your trailer's electric brakes in the event that your trailer accidently disconnects from your tow vehicle.Features: Sealed lead-acid battery replaces the battery that came with your trailer breakway kit Works with Curt Soft Trac I (C52040 or C52041) and Soft Trac II (C52028 or C52026) breakaway kits 5 Amp-hours 12 Volt
Replaces the side-loading battery box that came with your Curt Soft Trac I trailer breakaway kit. The lockable lid screws down and has built-in rubber gaskets that help to keep water out. ... Features: Replaces the battery case that came with your Curt Soft Trac I breakaway kit (C52040 or C52041) Side-loading case is easy to access from the side Lockable lid deters theft Fastens using (4) 1/2" x 2-1/2" screws (not included) Locks using a padlock (sold separately) Weather-resistant polyethylene construction protects your battery from moisture and debris Rubber gaskets inside the lid keep water out Bolt-on installation Specs: Dimensions: 5" long x 3-3/4" wide x 3-3/8" tall 1-Year limited warranty
Replaces the 12-volt battery charger that came with your Bright Way breakaway kit. This charger wires to your tow vehicle's power source and to the battery in your breakaway kit.Features: Replaces the charger that came with your Bright Way trailer breakaway kit Works with models 2339, 2345, 2354 Can be added onto model 2337 Uses your tow vehicle as a power source to charge the trailer breakaway battery Securely installs inside battery box - hardware not included Wires to battery, breakaway switch, and 12V vehicle power source Specs: Charger amperage: 0.5 amps Wire size: 16 gauge
Replaces the battery box on your Dexter gel cell breakaway kit for BrakeRite systems (T4822100). Includes 1 battery box.Features: Replaces the battery box on your Dexter gel cell breakaway kit for BrakeRite systems (T4822100) Includes 1 battery box Specs: Outside dimensions: 6" long x 3-1/2" wide x 5-7/8" tall Mounting holes: Center to center vertically: 2-1/2" Center to center horizontally: 6-5/8" Inside dimensions: 5-1/16" deep x 5-5/8" long x 3-1/16" wide
Filters
