Rub marks, squeaks, or crooked loading? This swivel top angle replaces the pivoting head on your bolster bracket, letting your bunk sit flush to the hull. Pair it with an upright bracket to complete your setup.Highlights Lets the Bunk Follow the Hull: A slight pivot lets you adjust the angle of your bunk so it sits flush to your boat, spreading contact and cutting down on rub marks. Smoother Loading: The joint gives a little as you load and unload, which helps prevent pressure points and squeaks.
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.Features: L-shape brackets accommodate a variety of different roller lengths Mount to your boat trailer's frame or tongue Sturdy, 7-gauge galvanized steel construction resists corrosion Made in the USA Specs: Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft Diameter of mounting holes (each): 3/8" Quantity: 1 pair Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Create a sturdy tie-down spot wherever you need it on your boat trailer. This aluminum bracket bolts to your trailer's frame, wall, or floor so you can secure your coolers or gear to prevent shifting during travel.Versatile Mounting: Bolts to your trailer's frame, wall, or floor - just add your own hardware. Angled for Easy Use: 30-degree mounting angle works with most tie-down setups and helps straps stay put. Aluminum Build: Won't rust like steel, so it's ready for saltwater or freshwater trips.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. The included 85-degree and 95-degree brackets install on an angled or V-shaped boat trailer frame with 2 U-bolts (sold separately).Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 85-Degree and 95-degree angles are designed for vertical mounting onto angled or V-shaped boat trailer frames Ensures alignment of the bunk board mounting holes Requires (2) 1/2" diameter U-bolts (sold separately) for installation 3 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Overall dimensions: 85-Degree bracket dimensions: 6" tall x 5" wide 95-Degree bracket dimensions: 7" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/16" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Heavy-duty, rust-resistant brackets let you mount extra-large bunk boards on their sides to hold large boats. 90-Degree bases install on level trailer frames with 2 U-bolts (sold separately). ... Features: Heavy-duty brackets let you mount a bunk board on your boat trailer Ideal for big bunk boards, such as 3x8 or 4x8 Stabilizes one end of the bunk board - additional brackets (sold separately) required for opposite end of board 90-Degree angle for vertical mounting onto level boat trailer frames (2) 1/2" Diameter U-bolts (sold separately) required for installation 4 Pre-drilled holes on each bracket let you raise or lower the bunk board during installation Secure board vertically on its side between the brackets with a 1/2" bolt (sold separately) Galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 2 brackets Dimensions: 8" tall x 5" wide Distance between trailer mounting holes (center to center): 3-9/16" Distance between bunk board mounting holes (center to center): 1-1/2" Plate thickness: 1/4" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
... Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.Features: Low-profile trailer reflector increases visibility of vehicle at night and in low lighting Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors 47,000 Microprisms per square inch for superior reflective power Durable construction is fully sealed and won't rip or tear Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and flat surfaces DOT compliant Made in the USA Dimensions: 2-3/4" wide x 1-3/4" tall Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 40303 Truck Lite # 32A Optronics # RE10AB Wide Angle Spitfire Reflector vs Conventional Reflector
I don't have any specifics on your boat or trailer but the main thing you need to check before using the CE Smith Bunkboard Guide-On Kit part #CE27600K75 is your frame size. This kit works with trailer frames 3" wide and up to 4-1/2"…
The CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair #CE10211G have holes that are 2-1/4 inches on center and 1-1/4 inches on center in the other direction. I've attached a photo to assist as well as a…
That is really odd! Especially if its only one brake magnet. I would assume that there is a short from the camper battery positive wire circuit to the brake output but even that should affect all of the brake magnets. I would start by testing to see…
We do have a Bearing Buddy which fits a similar dimension as the 2-3/4" you referenced but I do recommend using a digital caliper and measuring your hub bore size to the thousandths of an inch to ensure you get the correct fit. For a 2-3/4"…
This Submersible LED Trailer Light Kit with 25 foot Wiring Harness, part #TLL9RK, uses all stainless steel mounting hardware. The mounting hardware of this trailer light kit should work well in the saltwater conditions that you use your boat in.
I went out to the warehouse and pulled a CE Smith Stake Pocket, #CE45004G, to take some measurements. The dimensions listed on the product page are correct. The opening is 3-1/2 inches wide by 1-1/2 inches deep. A lumber industry standard 2x4…
Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…
... Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.Features: Low-profile trailer reflector increases visibility of vehicle at night and in low lighting Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors 47,000 Microprisms per square inch for superior reflective power Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and flat surfaces DOT compliant Made in the USA Dimensions: 2-7/8" diameter Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 40052-4 Truck Lite # 98175R Optronics # RE21RB Wide Angle Spitfire Reflector vs Conventional Reflector
... Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.Features: Low-profile trailer reflector increases visibility of vehicle at night and in low lighting Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors 47,000 Microprisms per square inch for superior reflective power Durable construction is fully sealed and won't rip or tear Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and flat surfaces DOT compliant Made in the USA Dimensions: 2-3/4" wide x 1-3/4" tall Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 40302 Truck Lite # 32 Optronics # RE10RB Wide Angle Spitfire Reflector vs Conventional Reflector
... Low-profile trailer reflector increases visibility of vehicle in low lighting. Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors. Adhesive backing for easy install.Features: Low-profile trailer reflector increases visibility of vehicle at night and in low lighting Spitfire design has 50 percent wider angle of reflectivity than conventional reflectors 47,000 Microprisms per square inch for superior reflective power Surface mount to trailer with pressure-sensitive adhesive backing Works on curved and flat surfaces DOT compliant Made in the USA Dimensions: 2-7/8" diameter Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 40053 Truck Lite # 98175Y Optronics # RE21AB Wide Angle Spitfire Reflector vs Conventional Reflector
Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant galvanized steel.Features: Creates a fixed-position tie-down on your trailer Bolts to trailer's frame, wall or floor Mounting hardware not included 30-Degree mounting angle accommodates most tie-down applications Constructed of galvanized steel - long-lasting and corrosion resistant Made in the USA Specs: Quantity: 1 bracket Length: 4" Width: 1-15/16" Small bolt hole diameter: 1/2" Large bolt hole diameter: 7/8" The 30-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.
... Low profile LED light illuminates your RV or trailer's exterior with bright white light at a downward angle. Durable die-cast aluminum housing and polycarbonate lens. Surface mount. 2-Wire pigtail.Features: Low-profile, exterior light provides bright white light for your RV or trailer's exterior Flood beam illuminates a wide area Light emits at 45-degree angle making it great for illuminating an outdoor area Sealed, waterproof housing and lens unit LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable die-cast aluminum housing and polycarbonate lens Clear lens with white LEDs Compatible with 12V DC systems Surface mount - hardware included 2-Wire pigtail includes power lead and ground wire Specs: Overall dimensions: 4-5/16" long x 2" wide x 1-3/8" tall Diodes: 6 Power draw at 12V: 0.82 amps Lifetime warranty on LEDs
... The keel won't center and you're tired from a day on the water. This bracket fixes the angle, steadies the roller, and helps guide your boat home without the struggle.Reliable Build: Made in the USA with marine use in mind. Features to know about Give Your Roller the Right Angle You're lining up to load, the current is pulling, the wind is picking up, and that roller's not where it needs to be. One inch off turns into ten minutes of frustration.
Be seen with this 3/4" round amber LED light for clearance or side marking. Mounted in a UV-resistant bracket for easy installation on flat surfaces. Quick wiring with an 8", stripped, 2-wire pigtail - just connect and go. PC rated.PC-Rated for Maximum Visibility: Meets peripheral and combined lighting standards - easier to spot from more angles. Features to know about Easy, Secure Mounting for Any Setup The corrosion-resistant, gray polymer bracket makes installation easy on flat surfaces - no recessed hole required.
Be seen with this 3/4" round red LED light for clearance or side marking. Mounted in a UV-resistant bracket for easy installation on flat surfaces. Quick wiring with an 8", stripped, 2-wire pigtail - just connect and go. PC rated.PC-Rated for Maximum Visibility: Meets peripheral and combined lighting standards - easier to spot from more angles. Features to know about Easy, Secure Mounting for Any Setup The corrosion-resistant, gray polymer bracket makes installation easy on flat surfaces - no recessed hole required.
This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.Features: Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mounting bracket High-impact nylon construction Resists corrosion 4' Long wiring harness Hard-wires into vehicle wiring system Has 1/2" convoluted tubing Forms weathertight seal on back of socket Keeps out moisture Prevents corrosion Includes color-coded, 7-wire leads that meet RVI standards Right-angle mounting bracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating Protects against rust and corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty
Easily raise or lower your boat trailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
... Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire pigtail. P2 rated.The unit is sonically sealed, which means that the water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side.
Galvanized steel swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that your boat's hull fits snugly during transport. ... Features: Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 11-Gauge, galvanized steel construction is sturdy and resists corrosion Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-3/8" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: 2-1/2" apart on center Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This heavy-duty, galvanized steel swivel bracket attaches to your CE Smith double U-bolt bolster bracket on your boat trailer and lets you tilt your bunk board to the proper angle. ... Features: Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto the trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Ideal for use with CE Smith double U-bolt bolster brackets (CE10190GA, CE10191GA, CE10192GA, and CE10196G - sold separately) 3 Bolt holes allow for a strong, sturdy connection to the bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 7-Gauge, galvanized steel construction is sturdy and resists corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-1/2" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
... Waterproof, LED trailer light serves as either a side marker light or clearance light. Durable polycarbonate housing and lens. Surface mount with bracket. Single wire grounds through mounting hardware. P2 rated.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side.
... Waterproof mini trailer light functions as a clearance light or side marker light when properly mounted. Durable polycarbonate lens. Surface mount with self-grounding bracket and hardware. 1-Wire design. P2 rated.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side.
This lightweight and corrosion-resistant aluminum swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that the boat's hull fits snugly during transport.Features: Swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 3 Bolt holes allow for a strong connection to the bunk board Aluminum construction is sturdy and offers superior corrosion resistance Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-1/2" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: Outer holes (center to center): 2-1/2" Inner holes (center to center): 1-1/4"
Filters
