Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…
view full answer...The Draw-Tite item #DT73QR installs below the bumper. This hitch is perpetually backordered due to Draw-Tite being bought out so I have a way better option for a hitch for your 2023 Lexus RX 350. I recommend the Curt Trailer Hitch item #C29VV. This…
view full answer...You can certainly adapt a 7-way trailer connector on a trailer to a 4-pole on a vehicle by installing the #37185 adapter you referenced. Simply use the included mounting bracket to install the adapter onto the vehicle, and plug the 4-pole portion of…
view full answer...Hey Bo! To set up your semi for a standard 7-way plug, you will first need the Curt Powered Tail Light Converter item #C59496, which would tap into the circuits feeding your tractor trailer 7-pin round plug. The yellow wire taps into the feed for the…
view full answer...The Ram Square 2-Speed Jack part #TJD2SP-12000SP-F does not have any sort of compatible powered drive kit available. That said, if you were to go with the Bulldog Square 2-Speed Jack part #BD183816 you could then use the Bulldog Powered-Drive Kit…
view full answer...Thanks for reaching out, Linda! If you're able to reuse your motor then I recommend going with the Bulldog 2-Speed Jack #BD183902, but if the motor is unusable then I recommend the Square 2-Speed Jack w/ Crank - Drop Leg w/ Spring Return…
view full answer...If you need a 6 lug on 5.5 inch bolt pattern then you will need the following hubs. 8-213-5UC1-EZ 6 on 5.5 Idler Hub Bearings 25880 inner and 15123 outer 8-201-9UC3-EZ 6 on 5.5 Hub and Drum Bearings 25880 inner and 15123 outer If you need a 8 lug on…
view full answer...If you plan to do some towing with your 2008 Ford Taurus X I would recommend going with a Class III hitch like the Draw-Tite Max-Frame #75299, which has been confirmed to fit your vehicle. Class III hitches have more capacity than Class II hitches…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
view full answer...I looked up the information on your TDE 46205 Hubs and found a couple of great replacements for you. The one you pick will depend on the number of wheel studs you have. For 5 wheel studs use the etrailer Trailer Idler Hub Assembly for 2,000-lb E-Z…
view full answer...Yes, the Peterson trailer light kit, part 432800, or similar Optronics Trailer Light Kit, #TL29BK, has the proper connector to attach to the Wiring Harness part #118304 that you installed on your 2009 Toyota Sienna. The side markers may have to be…
view full answer...In order to use 17.5" diameter trailer wheels you'll need to upgrade to 9/16" lug studs. There are no other options as all wheels this size use this size or larger since they are designed for more weight. In order to do this you'll…
view full answer...