Hello Patrick, thanks for reaching out. We do have a great option for upgrading a standard powered roof vent. What I recommend is the following: - MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke…
Hello Phil! Sure can! The Lippert 3,500 lb axles use a standard brake size and bearing combination, so we can absolutely provide self-adjusting brakes and new hubs for that. Here is what I recommend: - etrailer Electric Trailer Brakes -…
Hello Tony, I really wish I had a database that tells me exactly what goes on each camper, but unfortunately, I don’t. Based on my research, you should have a 4,400-pound axle (you can double-check your axle tag to confirm). If it is NOT a Lippert…
Since heat rises I would at the very least put a set of the Trailer Vents #HMAV2-AVT2 near the top of the trailer to get the hottest air of the trailer out. What you could do for maximum air flow in your trailer is have a set facing forward in the…
The overall diameter of the wheel/tire will be the determining factor for which SnapRing is the correct fit. For example the SnapRing TireSavers Tire Covers #ST7001WH will fit a 27" to 29" diameter. If you can give me the overall diameter…
Hey Eric, To keep your ST235/80R16 spare trailer tire protected, I recommend the etrailer 30"-32" Tire Cover #e77VV. Your ST235/80R16 tire measures 30.8 inches, so this cover will be the perfect size to keep it safe and it's super easy…
Tom, It looks like that mounting bracket you're looking for has been discontinued because I wasn't able to find it through Lippert, I could only find it in a few places but they didn't have any stock. However, if you have the Vision S…
Hey Dave, yes the Timken grease seal part #TMK58ZR is a replacement for what you have now. I would go with the Timken but we also do carry your exact part number replacement with the part #58846.
Since your tire size of ST225/75R15 has a diameter of 28 inches the wheel covers you'd want are the #290-3973 for a pair of vinyl ones that would be used on the wheels on the ground of the parked trailer. Then for the spare cover you'd want…
You'll definitely need to straighten that line out otherwise you'll keep having issues with cable not wanting to fully close the gate. You can remove the four bolts that mount the gate valve to the pipe and see if turning it 90 degrees and…
You can lubricate the valve by dumping some vegetable oil in and working the valve open and closed. If you can take off your valve without it being a huge hassle or have your valve is right at the opening I recommend using some water resistant…
Filters
