Install this socket in your truck bed for fast, easy hookup of a 5th-wheel or gooseneck trailer. Built-in magnet creates tight connection with an EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.Silicon O-Ring Creates Watertight Seal The lid on this trailer connector has a silicon O-ring that creates a watertight seal over the socket when the lid is closed. The EZ Connector trailer-end plug (sold separately) has a double O-ring that will create a seal when it's inserted into the connector.
... PC rated. 2-Wire design. 9" Long pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the front corner of your trailer to act as both.
... PC rated. 9" Long pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
... PC rated. 18" Long, 2-wire pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
... PC rated. 18" Long pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the front corner of your trailer to act as both.
... PC rated. 2-Wire design. 18" Long pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
... PC rated. 20' Long pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the front corner of your trailer to act as both.
... PC rated. 20' Long pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
... PC rated. 5' Long pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the front corner of your trailer to act as both.
... PC rated. 5' Long pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
... IP68 sealed and truly submersible, it installs with standard bolts and a 12" pigtail to keep your trailer bright and legal mile after mile.Features: Left-side box light with 8 functions: stop, turn, tail, side marker, clearance marker, rear reflector, side reflector, license plate light IP68 dust- and waterproof with hermetic seal - sonic-welded, potted electronics are submersible Surface mount installation - hardware not included Impact-resistant lens; meets FMVSS 108 requirements Specs: Measurements: 6" x 3-9/16" x 2-1/4" LEDs: 7 6 Red 1 White for license plate light Color: Red Voltage: 9 to 14 volts Mounting: Uses (2) 1/4-20 carriage bolts (not included) Connector: 12" Pigtail Wire colors: White: ground Brown: brake lights and license plate Green: right turn Yellow: left turn Lifetime warranty TecNiq's 8 Function Slim Line taillight is able to meet all requirements for stop, turn, tail, side marker, clearance marker, rear reflector, side reflector and license plate light in a revolutionary, cost-effective design.
Quality LED lighting from trailers and trucks to marine and emergency gear. Easily installed, rugged and lifetime guaranteed for demanding use.Features: Powered by 6 high efficiency LEDs Fits all standard 6" oval applications Can be installed at any angle Specs: Measurements: 6-1/2" x 2/1/4" x1-1/2" LEDs: 6 Color: Red Lens Voltage: 9 to 14 volts DC Mounting: Fits standard mounting holes Connector: 9" pigtail
Back up to the campsite and your signals pop - this slim 6" oval light mounts to standard holes and just works. Sealed, UV tough, and ready for rain, it keeps you visible so setup stays simple and safe.Features: Stop/Tail/Turn LED with smooth surface, low-profile face Surface-mount design fits industry-standard 6" oval applications Mount horizontal, vertical, or at any angle and remain DOT compliant Impact-resistant, UV-stable automotive-grade polycarbonate lens TecSeal urethane potting protects the circuit board IP68 hermetic seal - dustproof and waterproof Meets FMVSS 108 requirements for wide and narrow vehicles Rated for reliable performance over 100,000 hours Wiring pigtail included Fits standard mounting holes Specs: Dimensions (surface mount): 7-9/16" L x 3-5/16" W x 1-1/2" D LEDs: 6 Voltage: 9-14 VDC Current (red lens): 0.17 A to 0.28 A Connector: 9" wiring pigtail Wiring: White - Ground, Red - High/Turn, Black - Low/Dim Mounting orientation: horizontal, vertical, or any angle Ingress protection: IP68 Lens material: automotive exterior lighting grade polycarbonate with UV resistance Compliance: FMVSS 108 Service life: rated over 100,000 hours Mounting pattern: fits standard 6" oval holes (surface mount) TecNiq has introduced a line of 6" oval stop and turn taillights.
Slim, right-side 7-function tail light that installs with standard bolts and a 12" pigtail. Sealed and submersible for ramps and storms, with bright LEDs and a tough lens to keep you seen mile after mile.Features: Right-side box light with 7 functions: stop, turn, tail, side marker, clearance marker, rear reflector, side reflector IP68 dust- and waterproof with hermetic seal; submersible - potted electronics for durability Surface mount installation Impact-resistant lens - meets FMVSS 108 requirements Specs: Dimensions: 6" x 3-9/16" x 2-1/4" LEDs: 6 Color: Red Voltage: 9 to 14 volts Mounting: Uses (2) 1/4"-20 carriage bolts (not included) Connector: 12" pigtail Wire colors: White: ground Brown: brake lights Green: right turn Yellow: left turn Lifetime warranty TecNiq's 7 Function tail light is able to meet all requirements for stop, turn, tail, side marker, clearance marker, rear reflector, and side reflector light in a revolutionary, cost-effective design.
From docking lights to work truck strobes, TecNiq offers high performance, value driven LED lighting built tough and backed for life.Features: Powered by 8 LEDs Hermetic seal for dust and waterproofing Durable impact resistant lens Exceeds FMVSS 108 standards Specs: Measurements: 6-1/2" x 3-1/4" x 1-1/2" LEDs: 8 Color: Red lens Voltage: 9 to 14 volts Mounting: Grommet mounted Connector: Pigtail Lifetime warranty TecNiq has designed this high visibility stop, tail, and turn light to ensure you are seen in all conditions and at great distances.
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 3-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wire Wire length: 10" Pigtail is a direct replacement for: Uni Bond PT9530 Truck Lite 94993 Grote 66843-3 Peterson 421-491
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power Wire length: 6" Pigtail is a direct replacement for: Uni Bond # PT6020 Wesbar # 108662 Truck Lite # 94902 Grote # 67050 Peterson #142-49 Bargman # 40-00-002
This 3-wire pigtail has a female plug on one end that pairs with the weathertight connection on the back of your Optronics light. Color-coded wire lead is 10" long. ... Features: Pigtail with weathertight plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights that have a weathertight connection Female weathertight plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wire Wire length: 10"
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Color-coded wire lead is 10-1/2" long. ... Features: Pigtail with 3-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson stop/tail/turn lights, parking/turn lights, and warning lights Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wire Wire length: 10-1/2"
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 10" long. ... Features: Pigtail with 3-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wire 20-Gauge wire Approximate wire length: 10" Pigtail is a direct replacement for: Uni Bond PT9180 Wesbar 729063 Truck Lite 94926-3 Grote 67000 Peterson 431-491 Bargman 40-00-003
This pigtail gives you a simple, weather-tight way to hook your stop/tail/turn light into your trailer wiring without guessing which wire goes where. ... Highlights Simple Hookup for TecNiq Lights: 3-wire pigtail plugs into the weathertight connector on the back of your TecNiq stop/tail/turn light. Clear, Color-Coded Wiring: White for ground, black for tail, red for turn so you're not chasing a wiring diagram.
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 10" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics backup and utility lights Male-pin, 2-prong PL-3 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for power #10 Ring terminal on ground wire Approximate wire length: 10" Pigtail is a direct replacement for: Wesbar # 729062 Truck Lite # 94925 Grote # 67010 Peterson # B431-49
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics backup and utility lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 2-prong PL-3 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for power #10 Ring terminal on ground wire Approximate wire length: 10" Pigtail is a direct replacement for: Uni Bond PT6020 Truck Lite 94992 Grote 67010 Peterson 421-49
Filters
