Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…
view full answer...Your picture didnt make it through. Could you email it to me? I wonder if maybe you found wrong connector.
view full answer...Hey Dan, welcome back! We don't have much information on the Curt Trailer Hitch item #C67RJ at this time. We just know it's going to fit the 2023 Toyota Prius. That being said, I took a look at your order history and I think you've…
view full answer...The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…
view full answer...Hello David. All of the 2-1/4" or 2-1/2" long 9/16" wheel studs we offer have a knurl diameter of .68, such at the Kodiak Wheel Bolt #K916WB25. We do not have anything with a knurl size of .60 or .62. We do have some 1/2" studs…
view full answer...If the spindle that was on your trailer axle previously had 8-91A stamped on the back of it your spindle should require inner and outer bearings of #L44649 like you used. The part #8-91-05UC1 that you referenced would be an exact replacement. Grease…
view full answer...The hub that you are looking for comes in the Trailer Hub Assembly #8-91-05UC1 on our site. For the E-Z Lube version you would instead want the Trailer Hub Assembly #8-91-05UC1-EZ. I contacted Dexter Axle and confirmed that these were the correct…
view full answer...Hello Robert. I looked up these monarch 5236 tail lights and from what I can see, this particular light is obsolete. We do have a good replacement option for you, but we do not offer a direct replacement. Our closest LED taillight assemblies we carry…
view full answer...The B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000 lbs #BWRVK3300 is a confirmed fit for your 2017 Ford F-350 with factory rail kit for 5th wheel. This hitch weighs just under 150 lbs. It does come in…
view full answer...Electric brakes such as Electric Trailer Brake Kit #AKEBRK-8 do not fit specific axles. These are 8,000 lb rated brakes with a 4-bolt mounting flange pattern and are 12-1/4" diameter x 3-3/8" wide, so you would need that mounting bolt…
view full answer...I recommend the Redarc Tow-Pro Elite Brake Controller #RED44FR for your 2022 Ram 2500. This will connect with the Plug and Play Wiring Harness #331-TPH-020 to the under dash connector. I prefer this controller over the Curt Echo #C27JR with the…
view full answer...I went out to the warehouse and measured the A-Frame Trailer Coupler #CA-5280-RB and found that from the widest point to the smallest point it measured 10-9/16" and 2-5/8" respectively. This will give you the angle. The overall height of…
view full answer...Filter Your Search
Contact and Help