Replaces the dropleg and footplate for your etrailer or Ram square, direct-weld trailer jack with a 3,000-lb capacity. Designed for TJD-5000 Series jacks.Features: Replaces the dropleg and footplate for your etrailer or Ram square, direct-weld jack with a 3,000-lb lift capacity Designed for use with Ram TJD-5000 Series jacks Tube outer width: 1-3/4" Dropleg travel: 13-1/2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Mounting hole spacing: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole Pin hole diameter: 5/8"
Replaces the 2" x 2" dropleg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. ... Features: Replaces the dropleg and foot from your etrailer or Ram square, direct-weld jack with a 7,000-lb capacity Designed for use with TJD-7000 Series jacks Offers an additional 13-1/2" of travel Durable zinc finish resists corrosion Specs: Tubing dimensions: 2" x 2" Footplate dimensions: 8" long x 6" wide Distance between adjustement pin holes center to center: 3-3/8" Overall height: 17-3/4"
Replaces the inner tube and spring-return dropleg for your etrailer square, direct-weld jack with spring-return dropleg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH).Features: Replaces the inner tube and spring-return dropleg for your etrailer square, direct-weld jack with spring-return dropleg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH) Quantity: 1 replacement inner tube and dropleg
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-1, LG-3, and LG-183708. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).Features: Replaces the follow jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708 Can be used with most landing gear sets, including Atwood, Venture, and Lippert models Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes dropleg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Dropleg: 15" Overall dimensions: 32-3/4" tall x 2-1/2" wide Leg length: 29-1/2" Weight capacity: 4,000 lbs
Replaces the inner tube, dropleg, foot, and pull pin for Curt heavy-duty, direct-weld square jack (28512).Features: Replaces the inner tube, dropleg, foot, and pull pin for Curt heavy-duty, direct-weld square jack with 10,000-lb lift capacity (28512) Specs: Inner tube dimensions: 3-1/2" x 3-1/2" Footplate dimensions: 8-1/4" x 8" Dropleg length: 14-1/2"
Replaces the lead jack from your Stromberg Carlson landing gear set (LG-1, LG-3, or LG-183708). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included).Features: Replaces the lead jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708 Can be used with most landing gear sets, including Atwood, Venture, and Lippert models Provides a mounting point for the hand crank or motor (sold separately) Connects to the follow jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes dropleg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Dropleg: 15" Overall dimensions: 32-3/4" tall x 2-1/2" wide Leg length: 29-1/2" Weight capacity: 4,000 lbs Distance between weld stops: Inside to inside: 15-1/2" Outside to outside: 17-1/2" Width of weld stops: 1"
Replaces the pull pin for your Bulldog jack with dropleg. Secures your dropleg at your desired trailer height. Measures 2-3/4" long x 9/16" diameter. ... Features: Replaces the pull pin for your Bulldog jack with dropleg BD180354, BD180455, BD190758, BD190708, or BD180304 Secures your dropleg at your desired trailer height Measures 2-3/4" long x 9/16" diameter Includes 1 pin with chain and clip Fits: Bulldog trailer jacks with dropleg: BD180354, BD180455, BD190758, BD190708, and BD180304
Drop-leg jack stabilizes your lightweight cargo or camper trailer. Weld the bracket onto your trailer, pull the pin to lower the dropleg, and pin in place. ... Features: Drop-leg stabilizing jack helps keep your lightweight trailer or camper level and steady Great for loading and unloading cargo or for camping Telescoping dropleg lets you adjust the height Once welded to the trailer, pull the pin to lower the dropleg and reinsert it to keep the leg in place Round footplate provides stability Sturdy steel construction Weld-on installation Specs: Height: 20" from bottom of footplate to top of jack Travel: 18" 1-3/16" From center of hole to center of hole Dropleg width: 1-1/4" Mounting bracket dimensions: 8" long x 1-1/2" wide Footplate diameter: 5-1/4" Lift capacity: 2,000 lbs 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Dropleg and pull pin fits most manual A-frame trailer jacks with round outer tubes. Zinc plating resists corrosion.Features: Dropleg and pull pin fits most manual A-frame trailer jacks with round outer tubes Clear zinc-plated finish resists corrosion Specs: Overall height: 13-1/4" Diameter of footplate: 5-1/4" Distance between pin holes center to center: 2" Distance between center of top pin hole and top of leg: 3-3/4" Distance between footplate and center of top pin hole: 9-1/2" Diameter of pin hole: 1/2" Pin dimensions: Overall length: 3" Usable length: 2-3/4" Diameter: 3/8" Outer diameter of tube: 1-3/4" Weight capacity: 2,000 lbs
Replacement heavy-duty jack leg is ready to get back on the job site! Front-facing plunger pin is easy to reach when using the adjustable dropleg. ... Features: Spring return retracts the jack hands-free Dropleg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Easily-accessible front-facing plunger pin Helps to avoid reaching under the nose of your trailer frame to use the droplegs Works best if you have open space between your trailer and your truck Weather-resistant black paint coat finish Carbon steel construction Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes standard footplate and sidewind crank Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 27" Screw travel : 12-3/8" Dropleg travel : 15" Overall height: Retracted: 27-1/2" Extended: 54-1/2" Outer tube width: 4" Inner tube width: 3-3/4" Distance between dropleg adjustment holes: 3-3/8" on center Number of adjustment holes: 5 Foot plate dimensions: 8-1/2" x 8-1/2" How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. Black powder coat finish resists corrosion. Includes 2 jacks and 1 handle.Features: Stabilizing jacks help keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jacks up for travel, down for use Droplegs extend so you can adjust the height Spring-loaded levers release droplegs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Installation hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Dropleg travel: 6-1/2" Lift capacity per jack: 650 lbs Maximum load the jack can lift Support capacity per jack: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 2 jacks 1-Year warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This replacement lead landing gear dropleg and snap pin will get you back to camping and enjoying the great features of your power landing gear.
After a long drive, you don't want to spend time leveling your trailer, you just want to relax. This dropleg gives your jack a wider base so it feels steady once you're parked, without stacking blocks or worrying about the jack sinking.Steadier When Parked: Wide foot helps reduce movement when people walk around inside. Faster Setup at the Site: Dropleg adjustment gets the tongue close to level before cranking. Eliminates Block Stacking: Replaces loose wood or plastic blocks under the tongue jack.
You pull in after a long drive, the ground looks fine, and you don't want to wonder if the jack will sink or a block will shift once everyone steps inside. This kit puts a wide dropleg and SnapPad under your jack, giving it a solid, steady base.Steadier When Parked: Wide foot and included SnapPad create a wider 7-1/4" base when people walk inside. Faster Setup at the Site: Dropleg adjustment gets the tongue close to level before cranking. Eliminates Block Stacking: Replaces loose wood or plastic blocks under the tongue jack.
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy DropLeg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin. Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Features: Effortless Operation: Electric jack makes lifting and lowering your A-frame trailer quick and effortless Quiet Powered Drive: Operates quietly, eliminating the need for hand cranking Simple Controls: Top mounted on/off and retract/extend buttons ensure straightforward operation Weatherproof Buttons: Covered with a flexible, rubber-like boot to keep water out and protect the inside of the housing Easy Installation: Bolt-on design means no hassle, no headaches Easy DropLeg Adjustment: Extends up to 4-1/2&uqot; for extra lift by pulling the pin. Power Connection: Wires directly to 12-volt power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Warranty: Limited lifetime warranty Specs: Lift: 18" Lift capacity: 3,500 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The dropleg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a dropleg for extra adjustability. On these jacks, you'll see the maximum extension of the dropleg listed in the specs as well. Adding the screw travel and dropleg travel together will give you the total lift.
Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. Black powder coat finish resists corrosion. Handle (SJ-100-HD) sold separately.Features: Stabilizing jack helps keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jack up for travel, down for use Dropleg extends so you can adjust the height Spring-loaded lever releases dropleg for use Steel handle (SJ-100-HD - sold separately) lets you easily fine-tune height adjustment Large foot provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Mounting hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Dropleg travel: 6-1/2" Lift capacity: 650 lbs Maximum load the jack can lift Support capacity: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 1 jack 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Pull the front-facing plunger pin on this jack to release the dropleg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows simple greasing. ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Dropleg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Dropleg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on dropleg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the dropleg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Easily-to-reach side-facing plunger pin deploys the dropleg Works best for setups where the jack is located behind the A-frame Spring return retracts the dropleg hands-free Dropleg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Heayv-duty internal compotents Durable 1" jack screw allows for heavy lifting Smooth screw travel - a second thrust bearing reduces friction and heat buildup Weather-resistant black painted inner and outer tubes Easy to maintain even in a long life of hard work Grease zerk fittings help keep gears working smoothly Footplate minimizes sinking in soft ground Weld-on installation Includes sidewind handle Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 25-3/4" Screw travel : 12-1/4" Dropleg travel : 13-1/2" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Diameter mounting hole Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Pull the side-facing plunger pin on this heavy-duty jack to release the dropleg. The durable jack screw offers increased strength. The built-in grease zerk allows for effortless greasing. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Dropleg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Footplate minimizes sinking in soft ground Weld-on installation Handle (TJD-12000-HD) sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 25-3/4" Screw travel : 12-1/4" Dropleg travel : 13-1/2" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Mounting hole diameter Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
If the 25K lift capacity of the TJD-25100 isn't enough, adding this follow leg will double it! Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Dropleg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speed jack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Dropleg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Dropleg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
... This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the dropleg adds the extra reach you need to dial in height before leveling.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy DropLeg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. Corrosion-Resistant Finish: E-coat and matte black powder coat help fight rust.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy DropLeg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking.
Filters
