V-wing bolster bracket supports the bunks on your pontoon boat trailer. Short bracket wings and deep cradle are great for narrow pontoons. Galvanized steel material is ideal for saltwater use.
This bolster bracket supports your pontoon boat trailer's bunks. Constructed of corrosion-resistant galvanized steel with a sturdy base, it helps you to properly align your 6" or 8" wide bunk boards on your trailer.
These guide-on posts make it easy to load your pontoon boat onto your trailer. They attach to the rear of your trailer and extend out of the water, providing a visual target to center the boat's pontoons around. Mounting hardware included.
This bolster bracket supports your boat trailer's bunk. Constructed of corrosion-resistant galvanized steel, it helps you to properly align your bunk boards and provides years of reliable use.
With mounting the CE Smith Bolster Bracket #CE10100A40 on an angle crossmember rather than a square you will want to use some square tubing to act as a gusset so a U-Bolt #CE15501A will hold the bracket tight against the crossmember. This will…
As the bunks will be support the weight of your pontoon boat, I always recommend getting them to the end of the transom, or as close as possible. As you mentioned using 14 foot long boards, you will want at least 4 evenly spaced support brackets per…
I contacted the manufacturer and one V-Wing Bolster Bracket, Item #CE26244G, should be placed at each frame cross member. Mounting hardware for these brackets is not included so I recommend using a screw and washer like our 3/8 Inch Stainless Steel…
Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
Pressure treated lumber can be used for bunk boards along with bunk carpet like the #CE11349. However, it is possible that some corrosion may occur from the chemicals in the lumber over time. The CE Smith bunk boards like #CE27840 are made from…
Yes, the CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers #CE26244G that you referenced would be a great option for bolster brackets for your pontoon boat trailer as that is exactly what this product was designed to do. The 1/8 inch…
Since you are planning on using the CE Smith V-Wing Bolster Brackets, part #CE26244G for a cradle, using boards that hang off the ends by 2-feet may give you plenty of support for your 22-ft pontoon boat. Adding the support to the middle crossbar…
To install the CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers part #CE26244G you want to use lag screws and a washer to attach the brackets which you will need to source from a local hardware store according to CE so drilling will be…
Yes, the CE Smith Bolster Bracket for Pontoon Boat Trailers #CE10052-32G that you referenced is universal enough that it will fit all standard pontoon sizes like what you have on your Aloha 1987 20 ft and a 20 ft Harris. I attached a picture that…
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. Fits trailer frames up to 3" wide x 4-1/4" tall. Hardware included.
4-3/16" x 1-3/8" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. P2 rated.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.
11-5/16" Wide x 45" long x 13" tall. This corrosion- and impact-resistant plastic fender is perfect for single-axle trailers, particularly marine applications. The fender fits 13-15" tires and includes three separate steps.
Multipurpose trailer lets you haul your jon boat, kayak, or personal watercraft. Adjustable bunks can be set front to back or side to side to hold different types of boats. 13' Long trailer with 12" wheels supports boats up to 14' long.
3-3/4" x 1-13/16" Oval. Low-profile trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount - hardware not included. 2-Wire design. P2 rated.
Easily load your pontoon boat with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with endcaps. They fit trailer frames up to 3" wide x 4-1/4" tall. Hardware included.
3-3/4" x 1-13/16" Oval. Low-profile trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount - hardware not included. 2-Wire design. P2 rated.
Multipurpose trailer lets you haul your jon boat, kayak, or personal watercraft. Adjustable bunks can be set front to back or side to side to hold various boat types. 11' 8" Long trailer with 8" wheels supports boats up to 12' long.
4" x 1-1/2" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.
Black PVC grommet lets you install an Optronics A91 Series, AL82 Series, AL90 Series, AL91 Series, or AL191 Series trailer light. Recessed-mount design. Provides shock protection to extend the life of the lamp.
Dacromet-plated rotors, calipers and mounting brackets are included with this 2-wheel-assembly disc brake kit. Designed for 10,000-lb Rockwell axles with leaf springs. Fits 16" dual wheels or 17-1/2" single wheels.
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with boat trailers.
Gooseneck coupler fits a 2-5/16" ball and has 8" of adjustment to fit your application. The curved internal ball clamp creates a tight fit for the hitch ball. A protected hidden spring latch is durable and easy to use.
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows simple greasing. Sidewind crank included.
Filter Results
