When you tow your jetski, this stone guard does the hard work for you. It deflects stones, debris, and saltwater using a stainless steel frame and heavy duty mesh, helping protect gel coat surfaces with an easy, drill free install.Features: Stone guard protects your jetski and PWCs while towing Advanced stone chip protection shields delicate gel coat surfaces from stones, debris, and saltwater Prevents chips, scuffs, and erosion of the gel coat that can reduce resale value Proprietary, heavy-duty double weave PVC mesh Angled, adjustable panels can be angled to fit most PWC trailers for a snug, aerodynamic fit Removable covers are easy to clean or replace, minimizing upkeep Marine-grade, stainless steel frame engineered to hug your PWC's profile securely High-grit finish performs in the most extreme marine environments and weather conditions Designed and tested under rugged conditions to deliver long-lasting protection Easy, drill-free installation makes it a practical and reliable upgrade for frequent travelers Heavy-duty galvanized U-bolt specifically designed to securely hold the A-frame safely Specs: Dimensions: 4'7" wide x 1'8" tall Certifications: Salt spray test ASTM B117 Stone chip resistance test ASTM D3170 Thermal cycle test IEC 60068-2 Vibration test ISO 16750-3:2007 ADR compliance 13/00 - VSB 1 General safety ADR 42 3-Year warranty
Swing-up boat trailer jack is perfect for your small boat or jetskitrailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs.
Swing-up boat trailer jack is perfect for your small boat or jetskitrailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs.
Swing-up boat trailer jack is perfect for your small boat or jetskitrailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs.
Swing-up boat trailer jack is perfect for your small Jon boat or jetskitrailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs.
Swing-up boat trailer jack is perfect for your small Jon boat or jetskitrailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs.
Swing-up boat trailer jack is perfect for your small Jon boat or jetskitrailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. ... For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs.
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight. Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo).
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. ... To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight. Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo).
12' Personal water craft trailer hand winch strap with safety hook.Features: Designed for boat and jetskitrailer applications Mounting bolt and lock nut included Made in the USA Specs: Strap working load limit: 1,700 lbs Break strength: 2,600 lbs 12' Long strap with hook Hand saver loop dimensions: 1" x 18" Steel hook tensile strength: 3,750 lbs Mounting bolt dimensions: 2-1/2" x 1/4" bolt Note: Winch straps should always be chosen according to their safe working load limit (WLL).
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. ... To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight. Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo).
Made for trailering Jon boats, aluminum fishing boats, or jetskis, this twisted polypropylene winch rope resists sun and spray, and gives you 20' of lightweight strength for small winches rated up to 1,200 lbs.This 20', 3/8" rope is made for winches rated up to 1,200 lbs, perfect for trailering Jon boats, aluminum fishing boats, or even jetskis. Stands Up to Sun and Spray This rope is twisted polypropylene, which means it resists UV damage, rot, and mildew.
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight. Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo).
Take the effort out of lifting your trailer with this electric jack from Stromberg Carlson. The sleek black jack features an LED light for nighttime use, as well as water-resistant switches and a vacuum-formed cover for protection from the elements.To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight. Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo).
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 5' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.It gives you a traditional look with steady, controlled movement so your boat loads and unloads without sudden shifts on steep ramps. No matter if you're trailering a ski boat, sailboat, or fishing boat, these boards provide support and help keep your hull safe. Specs Fit Works with: small to mid-size watercraft that uses 2x4 bunk setups Mounts to: existing trailer brackets (hardware not included) Material Construction: 2x4 lumber wrapped in marine-grade carpet Carpet: Black, weather-resistant, mold- and mildew-resistant Dimensions & Weight Length: 60" Width: 4" Height: 2" Weight: 12.62 lbs (pair) General Quantity: 2 bunk boards Warranty: 1-year limited Made in the USA
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 3' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.It gives you a traditional look with steady, controlled movement so your boat loads and unloads without sudden shifts on steep ramps. No matter if you're trailering a ski boat, sailboat, or fishing boat, these boards provide support and help keep your hull safe. Specs Fit Works with: small to mid-size watercraft that uses 2x4 bunk setups Mounts to: existing trailer brackets (hardware not included) Material Construction: 2x4 lumber wrapped in marine-grade carpet Carpet: Black, weather-resistant, mold- and mildew-resistant Dimensions & Weight Length: 36" Width: 4" Height: 2" Weight: 8.5 lbs (pair) General Quantity: 2 bunk boards Warranty: 1-year limited Made in the USA
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 4' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.It gives you a traditional look with steady, controlled movement so your boat loads and unloads without sudden shifts on steep ramps. No matter if you're trailering a ski boat, sailboat, or fishing boat, these boards provide support and help keep your hull safe. Specs Fit Works with: small to mid-size watercraft that uses 2x4 bunk setups Mounts to: existing trailer brackets (hardware not included) Material Construction: 2x4 lumber wrapped in marine-grade carpet Carpet: Black, weather-resistant, mold- and mildew-resistant Dimensions & Weight Length: 48" Width: 4" Height: 2" Weight: 12.28 lbs (pair) General Quantity: 2 bunk boards Warranty: 1-year limited Made in the USA
... These sturdy fenders have a flat back to mount flush with your tandem-axle trailer. Aluminum construction is corrosion resistant. Bolt or weld onto your trailer.Features: Rounded fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fenders flush with your enclosed trailer Close fit keeps dirt from building up between the fenders and trailer 1" Wide outer edge is rounded Rustproof, corrosion-resistant aluminum construction Bolt-on installation - drilling and purchase of mounting brackets (sold separately) required Made in the USA Specs: Application: tandem-axle trailers with 14" to 15" diameter wheels Dimensions: 72" long x 9" wide x 20-1/2" tall Quantity: 2 fenders Weight: 10 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fender to your old one.
... These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer Close fit keeps dirt from building up between the fender and trailer 1" Wide outer edge is rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 14" to 15" diameter wheels Dimensions: 66" long x 9" wide x 19-3/4" tall Quantity: 2 fenders Weight: 19 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
... These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer Close fit keeps dirt from building up between the fender and trailer 1" Wide outer edge is rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 15" to 16" diameter wheels Dimensions: 72" long x 10-3/4" wide x 20-1/2" tall Quantity: 2 fenders Weight: 20 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
... Bolt or weld onto your trailer.Features: Fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Great for boat trailers - inner edge tilts away from your trailer to provide extra clearance for your boat 1" Wide outer edge is rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 14" diameter wheels Dimensions: 65" long x 9" wide x 15" tall Quantity: 2 fenders Weight: 17 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
... These corrosion-resistant, stainless steel teardrop fenders are excellent for boat trailers. Slanted backs provide extra clearance for your boat. Easily bolt onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Great for boat trailers - inner edge tilts away from your trailer to provide extra clearance for your boat 1" Wide outer edge is rounded Sturdy, 16-gauge stainless steel is rustproof and corrosion resistant PVC coating protects from scratches and scuffs Sleek teardrop design offers a clean, stylish look Pre-drilled for bolt-on installation Requires purchase or fabrication of mounting brackets (not included) Made in the USA Specs: Application: tandem-axle trailers with 14" diameter wheels Dimensions: 65" long x 9" wide x 15" tall Width at narrowest point (center): 7-1/2" Quantity: 2 fenders Weight: 17 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
... These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded teardrop fenders cover 2 tires on each side of your tandem-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer Close fit keeps dirt from building up between the fender and trailer 1" Wide outer edge is rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fenders to get corrosion protection and to match your trailer's finish Sleek teardrop design offers a clean, stylish look Weld-on or bolt-on installation Requires drilling and purchase or fabrication of mounting brackets (not included) for bolt-on installation Made in the USA Specs: Application: tandem-axle trailers with 14" to 15" diameter wheels Dimensions: 72" long x 9" wide x 20-1/2" tall Quantity: 2 fenders Weight: 20 lbs each 1-Year limited warranty Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fenders to your old ones.
... This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.Features: Rounded fender covers 1 tire on your single-axle trailer Blocks road debris from hitting other vehicles and helps protect your trailer's cargo Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer Close fit keeps dirt from building up between the fender and trailer 1" Wide outer edge is rounded Sturdy, 16-gauge, cold-rolled steel construction Prime and paint the fender to get corrosion protection and to match your trailer's finish Weld-on or bolt-on installation Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation Made in the USA Specs: Application: single-axle trailers with 15" diameter wheels Dimensions: 32" long x 9" wide x 15" tall Quantity: 1 fender Weight: 9 lbs Tips for Replacing and Installing Trailer Fenders Do your best to match the dimensions of the new fender to your old one.
Filters
