Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Replaces the white jackcrank hub cap for your camper jack system. Fits all HappiJac manual and electric camper jack systems. Includes one hub cap.Features: Replaces the white jackcrank hub cap for your camper jack system Fits all HappiJac manual and electric camper jack systems Includes one hub cap Fits: All HappiJac manual and electric camper jack systems
Replaces the crank from your etrailer or Ram square, direct-weld jack with a 10,000-lb or 12,000-lb lift capacity. Handle allows you to manually crank the jack. ... Features: Replaces the sidewind crank handle from your etrailer or Ram square, direct-weld jack with a 10,000-lb or 12,000-lb lift capacity Designed for TJD-12000 Series jacks Durable steel construction with black powder coat finish Mounting hardware included
Replaces the crank handle on your etrailer or Ram scissor jacks (TJSCHD-24). Handle allows you to manually crank the jacks.Features: Replaces the crank handle on your etrailer or Ram 5,000-lb scissor stabilizer jack set (TJSCHD-24) Crank handle allows you to manually crank your jacks
Replaces the crank handle on your etrailer scissor jacks (e56VV and e96VV). Handle allows you to manually crank the jacks.Features: Replaces the crank handle on your etrailer 2,500-lb and 7,500-lb scissor stabilizer jacks (e56VV and e96VV) Crank handle allows you to manually crank your jacks
Replace the crank handle that came with your Lippert Components manual scissor jack with this new one. Crank handle assists in lowering and raising your scissor jack on your RV or trailer.Features: Manual crank handles can become easily lost at the campsite. Order your replacement crank handle here! Standard Lippert Components manual scissor jackcrank handle Can also be used with Lippert power tongue jacks in the event of a power failure 3/4" Hex socket 90-Day warranty
Replaces the crank handle for your Stromberg Carlson electric trailer jack (JET-2500, JET-3555, JET-3755, or JET-5000). Allows you to manually crank your jack in case there is no electricity available.Specs: Socket size: 7/16" Features: Replaces the crank handle on your Stromberg Carlson electric A-frame tongue jack Fits the following models: JET-2500, JET-3555, JET-3755, or JET-5000
Replaces the entire hand crank assembly on your Trailer Valet swivel jack and trailer mover (STC-V211).Features: Replaces the entire hand crank assembly of your Trailer Valet swivel jack and trailer mover (STC-V211) Includes 1 crank assembly
Hand crank for your HappiJac camper jack system allows you to manually raise and lower your jacks.Features: Hand crank lets you manually raise and lower your truck bed camper jacks Works with all HappiJac camper jack systems 4" Long shaft
Hand crank for your HappiJac camper jack system allows you to manually raise and lower your jacks. 8" Long shaft offers increased clearance.Features: Hand crank lets you manually raise and lower your truck bed camper jacks Works with all HappiJac camper jack systems 8" Long shaft for increased clearance
This crank handle will help you raise and lower your Stromberg Carlson scissor jack according to your needs.Features: Helps you raise and lower your Stromberg Carlson scissor jack according to your needs Works with Stromberg Carlson scissor jacks Made in the USA Specs: Overall length: 25-1/2" 1-Year limited warranty
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability.
Ratcheting jack lets you inch your trailer into tight spaces. Designed in Australia to stand up to the rigors of the Outback. Easily tracks through mud and gravel and offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 11" Screw travel and 7-1/2" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 11" Screw travel and 7-1/2" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Premium zinc finish offers great rust protection. 7" Screw tavel and 5" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud. Premium zinc finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg.Safe, Easy, Out-of-the-Way Positioning for Travel A sturdy magnet is built into the jack's easy-to-grip crank handle for secure attachment of the jackcrank. The handle detaches easily to store away and prevent hang-ups while traveling, yet it's strong enough to stay put while you're cranking the jack up and down.
Filters
