Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yes, they will! Both the Kodiak Hub Spacer for 11" Rotor item #KHUBS99A and the Kodiak Disc Brake Kit item #K2HR10-13-HD, you were looking at, will fit a 10,000 lbs Hayes axle. These fit a #99 spindle with Inner bearing item #28580 and…
view full answer...We have electric brake assemblies for Hayes 3500, 7000, and 12,000 pound axles, but not for 10,000 pound axles. Going with a different brand could have compatibility issues as we have found out in the past. Also, while it might be possible to use…
view full answer...DOT3 and DOT 4 fluid are compatible with each other, that is not the problem you are experiencing. Most likely you need to bleed your brakes again. It sounds like you didn't quite get all of the air out of the lines and that is why they feel…
view full answer...There could be a couple things happening here with the setup after you re-built the Dexter DX Series Electric Over Hydraulic Brake Actuator part #K71-651 for Disc Brakes. There could be an issue with the check valve in the actuator which is not…
view full answer...There really isn't an advantage to using hard brake lines over flexible ones. It really comes down to whichever will be easier for you to install. I would recommend the flexible brake line kit part #HS496-252 as it will be easier to install.…
view full answer...I can help you correctly run hydraulic lines on your trailer. Adding disc brakes is a great idea, but the reason you are having such difficulty finding a schematic is because hydraulic brakes are rarely installed on 5th wheel trailers and they are…
view full answer...Dexter does state that the electric over hydraulic actuator #K71-651 is compatible will all Ford factory brake controllers so that would include the one in your 2016 Ford F-350. I checked the owner's manual for your truck and it does state that…
view full answer...With the use of the Dexter Electric Over Hydraulic Actuator part #K71-651 the breakaway battery has to be charged otherwise it won't work. With standard electric drum brakes the brake controller would still control the brakes of your trailer like…
view full answer...The only replacement brakes we have that fit the same AL-KO brake mounting pattern of the K23-528-00 & K23-529-00 brakes are the Kodiak Disc Brake Kit #KD94FR. The AL-KO axles in this capacity used a unique 5 bolt mounting flange which we only…
view full answer...The Dexter Electric Trailer Brake Kit - Self-Adjusting - 12" - Left Hand and Right Hand - 8K #K23-532-533-00 is the correct replacement if your Hayes axle has brakes measuring 12" in diameter and 3-3/8" wide. This kit includes the…
view full answer...The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. This is not a spindle that we carry at this time, but I did find some of the measurements. I have attached a diagram showing the dimensions of a #99 spindle for you to check…
view full answer...For a 10k AL-KO trailer axle we have the Kodiak Disc Brake Kit part #K2HR10A11RERR but the #K2HR12A11-120DW that you referenced is designed for a 12k AL-KO axle.
view full answer...Filter Your Search
Contact and Help