If your straight trailer tongue takes up too much room in your garage or storage unit, this kit will help. Once installed, it lets your trailer fold back onto itself, freeing up to 6' of space.Bolt-On Install: Cut your trailer tongue, drill holes, and mount it in place with the included hardware. Fits Straight Trailer Tongues: Made to install on trailers with 3" wide x5" tall tongue frames. Made for Harsh Environments: Galvanized steel is slow to rust or corrode, even in saltwater.
If your straight trailer tongue takes up too much room in your garage or storage unit, this kit will help. Once installed, it lets your trailer fold back onto itself, freeing up to 6' of space.Bolt-On Install: Cut your trailer tongue, drill holes, and mount it in place with the included hardware. Fits Straight Trailer Tongues: Installs on tongues measuring 3" wide x5" tall. Sleek Powder-Coat Finish: Black powder coating adds a sharp look to your trailer while protecting against chips and everyday wear.
... Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic disc brakes and 3x5 straight tongue.Features: Hydraulic actuator activates trailer's brakes when tow vehicle slows or stops Electric reverse lockout lets you back up without actuating trailer brakes Solenoid activates automatically when you shift into reverse Low-profile coupler latch ensures easy, secure connection Over-center latch mechanism only engages when the actuator is fully seated on hitch ball Aluminum master cylinder is better at reducing corrosion than cast steel master cylinders Primed finish Weld-on installation Made in the USA Specs: Application: hydraulic disc brakes Ball size: 2" Mounting: 3" x5" straight tongue Capacity: 7,500 lbs 2-Year limited warranty When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward the rear of your vehicle.
Straight-tongue coupler bolts onto your 3" wide trailer tongue. Pull trigger and pull up on the latch to open the ball socket. The durable zinc offers superior rust resistance, making it perfect for boat trailers and similar applications.Features: Channel-tongue coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Trigger latch allows for safe and easy coupling and uncoupling Pull trigger and pull up on latch to open ball socket Sturdy steel construction Durable zinc finish provides superior corrosion resistance SAE J684 certified Bolt-on installation Hardware not included Specs: Ball size: 2" Channel width: 3" Overall dimensions: 10-3/4" long x 4-1/2" wide Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 5/8" Weight capacity: 5,000 lbs 1-Year warranty
For years, this UFP-style surge brake actuator has been the gold standard for boat trailers. Its bolt-on, low-profile design looks sleek on your trailer, and it comes with both electric and manual reverse lockouts. Made in the USA.Features: Activates your trailer's disc brakes when your tow vehicle slows or stops - no brake controller needed Lets you back up without locking up your trailer brakes Electric reverse lockout keeps your trailer brakes from activating when your reverse lights come on Included pin lets you manually lock out the brakes if you tow with a truck that only has a 4-way Creates a sleek look with its low-profile design Coupler latch sits flush with the actuator's body Provides you with a reliable, secure connection Latch mechanism only engages when the hitch ball is fully seated Safety pin keeps the socket closed around the ball, even if the latch pops up Resists rust and corrosion Zinc plating is great for boat trailers Aluminum master cylinder is rustproof, unlike cast steel ones Includes breakaway cable with S-hook Bolts onto your trailer tongue Hardware not included Certified by the SAE for safe, reliable operation Made in the USA Specs: Application: trailers with hydraulic disc brakes Designed to bolt on top of a 3" wide x5" tall trailer tongue Ball size: 2" Gross towing weight: 7,500 lbs Dimensions: 19" long x5-3/16" tall 2-Year limited warranty Tech Tip: If you really just need to replace the inner member of your old actuator and you're confident that you can salvage the outer casing, you can purchase DX99FR instead.
Minimize the amount of cranking needed to position your jack, and eliminate the need for wood or cinderblocks when storing your trailer. Jack stand provides a sturdy platform that evenly distributes your trailer weight.Features: Jack stand provides a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Wide, round base helps to distribute weight of trailer to prevent sinking into soft ground Light weight makes it easy to move and store Durable polyethylene construction Distinctive red color catches your eye Specs: Weight capacity: 5,000 lbs Dimensions: 8-5/8" diameter x 8-3/8" tall Note: Not designed to be used with trailer jacks with wheels or casters.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Dim or dead amber lights make your trailer harder to see from the front and sides. This LED upgrade replaces older incandescent fixtures and helps keep your rig visible, compliant, and ready for the next trip without constant bulb swaps.Specs Light: Function: LED marker/clearance light, PC rated (FMVSS P2 PC) LEDs: 16 Color: amber lens Overall dimensions: 5-3/4" long x 2" tall x 1-3/8" deep Mounting hole centers: 4-13/16" Construction: Housing and lens material: polycarbonate Construction: sealed, waterproof unit Electrical: Voltage: 12V DC Amp draw: 0.248A at 12.8V Wiring: hard wired, 2 wire (black = power, white = ground) Compliance And Warranty: Meets FMVSS P2 PC requirements Warranty: lifetime LED warranty
For years, this UFP-style surge brake actuator has been the gold standard for boat trailers. Its bolt-on, low-profile design looks sleek on your trailer, and it comes with both electric and manual reverse lockouts. Made in the USA.Features: Activates your trailer's disc brakes when your tow vehicle slows or stops - no brake controller needed Lets you back up without locking up your trailer brakes Electric reverse lockout keeps your trailer brakes from activating when your reverse lights come on Included pin lets you manually lock out the brakes if you tow with a truck that only has a 4-way Creates a sleek look with its low-profile design Coupler latch sits flush with the actuator's body Provides you with a reliable, secure connection Latch mechanism only engages when the hitch ball is fully seated Safety pin keeps the socket closed around the ball, even if the latch pops up Resists rust and corrosion Zinc plating is great for boat trailers Aluminum master cylinder is rustproof, unlike cast steel ones Includes breakaway cable with S-hook Bolts onto your trailer tongue Hardware not included Certified by the SAE for safe, reliable operation Made in the USA Specs: Application: trailers with hydraulic disc brakes Designed to bolt on top of a 3" wide x 4" tall trailer tongues See below for bolt pattern dimensions Ball size: 2" Gross towing weight: 7,500 lbs Dimensions: 19" long x 4-3/16" tall 2-Year limited warranty Tech Tip: If you really just need to replace the inner member of your old actuator and you're confident that you can salvage the outer casing, you can purchase DX99FR instead.
Use integrated switch or wire to a light switch to turn this double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.Features: Double dome light is perfect underneath a kitchen cabinet or in a walkway in your RV Included energy-efficient, warm white LEDs last longer and burn brighter than incandescent bulbs Integrated toggle switch lets you turn the lights on and off Can also be wired to an interior light switch Frosted plastic lenses are less likely to shatter than glass lenses Textured pattern helps disperse bright light throughout your RV Durable, white polycarbonate plastic construction Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included 2-Wire design - white for ground and black for power Specs: Overall dimensions: 10-5/16" long x 4-3/16" wide x 1-13/16" deep Mounting hole diameter: 3/16" Voltage: 12V DC Power draw at 12.8V: 0.6 amps Light output: Raw lumens: 920 lumens Effective lumens: 815 lumens Color temperature: 3,150 Kelvin Number of LEDs: 18 Lifetime warranty on LEDs Need extra light over your camper kitchen sink for when you do the dishes?
Use the integrated switch to turn this waterproof single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.Features: Single dome light is perfect underneath a kitchen cabinet or above a shower in your RV LED circuit board has surface-mount technology (SMT) that withstands shock, vibration, and heat Included energy-efficient, cool white LEDs last longer and burn brighter than incandescent bulbs Integrated toggle switch lets you turn the light on and off Can also be wired to an interior light switch Frosted plastic lens is less likely to shatter than a glass lens Sonically sealed, white polycarbonate plastic construction is waterproof Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included 2-Wire design - white for ground and black for power Specs: Overall dimensions: 6-5/16" long x3-15/16" wide x 1" deep Voltage: 12V DC Power draw at 12.8V DC: 0.30 amps Light output: Raw lumens: 290 lumens Effective lumens: 140 lumens Color temperature: 4,500 Kelvin Number of LEDs: 14 Lifetime warranty on LEDs Need extra light over your camper kitchen sink for when you do the dishes?
Use integrated toggle switch or wire to a light switch to turn this single dome light on and off. Included incandescent light bulb is perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear.Features: Single dome light is perfect underneath an RV kitchen cabinet or inside an enclosed trailer Included incandescent 921 bulb provides warm white light Integrated toggle switch lets you turn the light on and off Can also be wired to an interior light switch Clear plastic lens won't shatter if accidentally dropped like a glass lens would Diffused lens optics make light appear dimmer while actually giving wider viewing angle Durable, white plastic construction Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included 2-Wire design - white for ground and black for power CSA certified Specs: Overall dimensions: 7-5/16" long x 4-3/8" wide x 1-3/4" deep Mounting hole spacing (center to center): Up and down: 2-3/4" Side by side: 2-1/4" Voltage: 12V DC Incandescent bulbs type: 921 Number of bulbs: 1 1-Year limited warranty Need extra light over your camper kitchen sink for when you do the dishes?
Standard swing tongue kit for 3" x5" trailer tongues. Includes pivot box, hinge plates, mounting hardware, and hitch pin to allow the trailer tongue to fold for storage.Features: Standard swing tongue kit for 3" x5" trailer tongue applications Includes pivot box Includes all mounting hardware Includes hitch pin Raw finish Specs: Application: 3" x5" trailer tongue Hitch Pin Size: 5/8" x 6" Hinge Plate Hole Centers: 4.5"
Need bright interior lighting for your space? This double dome light provides wide, even illumination with 2 lenses and a built-in switch for easy control. It installs easily and is a great option for everyday interior lighting.Features: Double dome light designed to provide interior illumination Dual lens design helps distribute light evenly across a wide area Incandescent lighting for consistent performance Built-in switch allows easy on and off control 180-Degree beam angle for broad light coverage White housing for a clean, standard look Easy installation for quick setup Includes 1 double dome light Specs: Voltage: 12V Wattage: 36 watts Lumens: 528 Beam angle: 180 degrees Dimensions: 5" x 11-3/8" Light type: Incandescent
This Dutton-Lainson 2-speed, heavy-duty winch is designed for multipurpose horizontal pulling operations.Mechanical Advantage Reversible Ratchet 2-Speed Operation Max. Drum Capacity - Cable (3) Max. Drum Capacity - Strap DL15440 3,200 lb. 1-1/8" 17.3:1 / 5.4:1 9-1/2" 219 Yes Yes 3/8" x 30' 25' (2) Capacity is based in direct pull on the third layer of line on the drum.
Straight-tongue coupler bolts onto your 2" wide trailer tongue. Pull trigger and pull up on the latch to open the ball socket. The durable zinc offers superior rust resistance, making it perfect for boat trailers and similar applications.Features: Channel-tongue coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Trigger latch allows for safe and easy coupling and uncoupling Pull trigger and pull up on latch to open ball socket Sturdy steel construction Durable zinc finish provides superior corrosion resistance SAE J684 certified Bolt-on installation Hardware not included Specs: Ball size: 2" Channel width: 2" Overall dimensions: 10-3/4" long x3-1/2" wide Pin hole diameter: 5/16 " Minimum span needed for pin or pin lock: 5/8" Distance between mounting holes (center to center): 3-1/16" Weight capacity: 3,500 lbs 1-Year warranty
Straight-tongue coupler bolts onto your 2-1/2" wide trailer tongue. Pull trigger and pull up on the latch to open the ball socket. The durable zinc offers superior rust resistance, making it perfect for boat trailers and similar applications.Features: Channel-tongue coupler lets you hook up your trailer to your tow vehicle Provides connection point for hitch ball Trigger latch allows for safe and easy coupling and uncoupling Pull trigger and pull up on latch to open ball socket Sturdy steel construction Durable zinc finish provides superior corrosion resistance SAE J684 certified Bolt-on installation Hardware not included Specs: Ball size: 2" Channel width: 2-1/2" Overall dimensions: 10-1/2" long x 4-1/4" wide Mounting hole dimensions: 3" center to center Pin hole diameter: 5/16" Minimum span needed for pin or pin lock: 5/8" Weight capacity: 3,500 lbs 1-Year warranty
Dutton-Lainson sidewind swivel jack with a 6" dual wheel can be a real back saver when hitching and unhitching loaded trailers.Features: Easy to install: Bolt on mounting Can be mounted in a variety of ways on various sizes of trailer tongues Smooth operating Heavy-duty tongue jacks reduce physical effort required to maneuver loaded trailers into hitching position or removing the trailer from a vehicle Made from heavy-gauge steel for strength and durability The enclosed outer tube retards sand and dirt from contacting the miter gears and heavy-duty Acme screw Has maximum manueverability because of the offset swivel caster assembly Ergonomic hand grip with textured surface Made in the USA Specs: Capacity: 1,500 lbs Lift: 12" Fits square tongues up to 3" x5" All mounting hardware included 2-1/2" Diameter mounting hole in swivel bracket Fits most other brands of mounting hardware Zinc plated TUFFPLATE finish for longer life 3-Year limited warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Install a Fulton F2 jack onto your trailer's existing Fulton XP10 or XP15 jack mount. Simply bolt this adapter plate onto your welded-on mount. ... Features: Adapter plate lets you mount a Fulton F2 jack (sold separately) on your trailer's existing swivel jack mount Fits Fulton XP10 and XP15 weld-on jack mounts Works with F2 jacks that fit 3" x 4" trailer frames Self-healing Sharkskin finish offers a 1,200-hour salt spray rating Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications Sturdy steel construction Contoured design ensures a tight fit between your F2 jack and the existing mount Keeps jack close to trailer frame for effortless castering Helps maintain clean appearance Bolt-on installation with included hardware Specs: Pull pin hole diameter: 1/2" Dimensions: 5-3/4" long x 4-3/4" wide x 9/16" thick 5-Year limited warranty This jack adapter plate quickly bolts onto the Fulton XP10 or XP15 mount that is welded onto your trailer, so you can easily attach a Fulton F2 jack (sold separately).
Replacement kit includes everything you need to replace or repair the bevel gears on your Fulton marine or recreational jack.Features: Replacement kit includes gears, roll pins, washers and a handle bushing Fits Fulton XP15 marine jacks (XP15 0101, XP15W 0301, XP15L 0101, XPD15L 0101, HD25000101, and HD50000101) Specs: Gear Bevel: 5/8" thick x 1-5/16" wide Pin Spring: 3/4" long x 1/4" thick 0.230 Washer: 1/2" inside dia x 1-1/4" outside dia Spacer: 1/2" inside dia x.63 outside x 1-1/4" long 1.30 Groove Pin: 3/16.1875 thick x 1 long Bushing Flanged: 1/2 inside dia x.70 wide x.94 long Fits: Fulton XP15 marine jacks: XP15 0101, XP15W 0301, XP15L 0101, XPD15L 0101, HD25000101, and HD50000101
For heavy-duty applications that require cable, this galvanized winch cable has a break strength of 5,600 lbs and a working load limit of 1,865 lbs.Features: Designed for use with Fulton winches Made of strong galvanized cable Includes hook Specs: Dimensions: 50' long x 7/32" wide Maximum load (break strength): 5,600 lbs Safe working load limit: 1,865 lbs Limited 5 year warranty Please Note: All straps and cables should be chosen according to their Safe Working Load Limit (WLL).
Swing-up boat trailer jack is perfect for your small Jon boat or jet ski trailer. 8" Caster swivels 360 degrees to make it easy to maneuver your trailer. Rust-resistant premium finish is 5 times stronger than traditional zinc. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without getting your hand smashed Creates a stylish flair with the spoked wheel Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x5" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 13" Extended: 23" Screw travel : 10" Bracket dimensions: 5-1/2" wide x 6-3/4" tall Clearance: 13" from mounting bracket to top of jack Inner tube diameter: 2" Outer tube diameter: 2-1/4" Wheel dimensions: 8" diameter x 2" wide 3-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
11-5/16" Wide x 45" long x 13" tall. Corrosion- and impact-resistant plastic fenders are designed for single-axle trailers and are perfect for marine applications. Fenders fit 13-15" wheels and install with included brackets.Features: Designed for single-axle trailers Works great for marine applications Constructed of white plastic Corrosion and impact resistant Provides 3 convenient steps - front, rear and top Includes 4 installation brackets (PF1135-BKT-2) Installation hardware not included Made in the USA Specs: Application: single-axle trailers with 13" - 15" diameter wheels Weight capacity: 200 lbs each Dimensions: 11-5/16" wide x 45" long x 13" tall Fenders are 32-3/4" long, less the end steps Qty: 2 fenders and 4 mounting brackets Step dimension: 6" wide
11-5/16" Wide x 45" long x 13" tall. This corrosion- and impact-resistant plastic fender is perfect for single-axle trailers, particularly marine applications. The fender fits 13-15" tires and includes three separate steps.Features: Designed for single-axle trailers Works great for marine applications Constructed of white plastic Corrosion and impact resistant Provides 3 convenient steps - front, rear and top Requires 2 installation brackets (PF1135-BKT-2; sold separately) Made in the USA Specs: Application: 13" to 15" tires on single-axle trailers Weight capacity: 200 lbs Dimensions: 11-5/16" wide x 45" long x 13" tall Fender is 32-3/4" long, less the end steps Qty: 1 fender Step dimension: 6" wide
Filters
