You're checking battery levels in an RV but don't want another display to install. This monitor uses a 99.6% accurate shunt and the VictronConnect app to show state of charge and usage, so you get precise data without adding a screen.It can transmit battery voltage, current, and temperature to connected chargers, and the auxiliary connection can be used for second batterymonitoring, midpoint monitoring, or temperature sensing.
Running lights, a fridge, and an inverter, voltage can look fine until it drops fast. This monitor tracks state of charge, current, and remaining runtime in real time, with Bluetooth app access, so you can see usage and adjust before power runs out.Keep the Monitor From Becoming Its Own Battery Drain Batterymonitoring doesn't do much good if the monitor itself keeps pulling more power than it should, especially on setups where every bit of stored energy counts.
You're checking battery levels in an RV but don't want another display. This IP65-rated monitor uses a 99.6% accurate shunt and the VictronConnect app to show state of charge and usage, so you get precise data without adding a screen.When the system grows beyond a standalone monitor, the SmartShunt can pass battery data into connected Victron hardware instead of staying isolated. Handles Harsh Install Locations While Covering Different Battery Setups Batterymonitoring gear often ends up mounted where moisture, dirt, and temperature swings are part of the deal, and that can narrow where you can safely place it.
Running lights, a fridge, and an inverter, voltage can look fine until it drops fast. This monitor tracks state of charge, current, and remaining runtime in real time, with Bluetooth app access, so you can see usage and adjust before power runs out.Flexible Monitoring for More Complex Battery Setups Basic monitors start to fall short once the system goes beyond a single simple battery readout.
As your 12V or 24V system outgrows basic wiring, this 1,000 amp shunt centralizes batterymonitoring and DC distribution in one Lynx module. VE.Can ties it into a GX device, and M10 terminals support multiple fuse types, keeping wiring organized.The built-in batterymonitor and VE.Can communication turn it into a central reporting point instead of a standalone add-on. In real use, battery data shows up as part of the system layout you already built, so you're not chasing information through unrelated components.
You're checking battery levels in an RV but don't want another display to install. This monitor uses a 99.6% accurate shunt and the VictronConnect app to show state of charge and usage, so you get precise data without adding a screen.Retrofit Detailed Monitoring Without Piling on Extra Hardware Adding better batterymonitoring usually means more wiring, more clutter, and more stuff to mount.
As your 12V or 24V system outgrows basic wiring, this 1,000 amp shunt centralizes batterymonitoring and DC distribution in one Lynx module. VE.Can links it to a GX device for system-wide state-of-charge data, keeping wiring organized and readable.Wide Voltage and Environmental Range: Operates from 9V to 70V DC and -40ºF to 140ºF for varied system conditions. Features to know about Clean Up High-Current Battery Wiring and Monitoring Once a bigger 12V, 24V, or 48V system grows past basic battery cables and separate add-on parts, the wiring usually gets messy fast and battery data ends up living somewhere else.
You're checking battery levels in an RV but don't want another display. This IP65-rated monitor uses a 99.6% accurate shunt and the VictronConnect app to show state of charge and usage, so you get precise data without adding a screen.This monitor uses 99.6 percent accurate shunt measurement technology, so it tracks actual battery usage and performance instead of giving you a rough snapshot.
Stay off-grid longer. Charge your trailer battery as you drive, check power from your phone, and keep your gear running so you can settle in, relax, and enjoy your favorite camping spot without worrying about power.Everything You Need in One Box: Includes a charger, batterymonitor, fuses, and has a built-in solar regulator and battery isolator. Plug In and Go: Uses your 7-pin trailer plug for a quick setup.
Stay powered up off-grid with rugged gear built for the Outback. The Redarc Alpha 100 R quickly charges big battery banks, runs your setup, and lets you jump a dead starter battery from your phone. Perfect for overlanding rigs, RVs, and work trucks.Highlights Supercharged Charging: Delivers up to 100 amps to quickly recharge even the largest auxiliary battery banks. Charge From Anywhere: Automatically prioritizes alternator, solar, or DC input for the fastest, most efficient charge. App Control & Smart Monitoring: Track and adjust your system, or recover your battery from the RedVision app or compatible touchscreen.
If you walk away your RV or off-grid system, you lose visibility into battery and charging performance. This unit uses built-in 4G LTE-M to send data to Victron VRM without local internet, so you can check status and alerts from anywhere.In real use, you get a cleaner picture of what the system is doing over time without building out a more complicated monitoring setup. Background Monitoring With Alerts and History Manual spot checks don't tell you much about what happened between visits, and that's where small problems turn into expensive ones.
Track battery status with confidence using this high-precision monitor. The BMV-702 Black shows voltage, current, state of charge, and time to go, plus it adds second-battery, temperature, or midpoint monitoring for smarter system oversight.Features: See Your True Battery Status: Tracks voltage, current, amp hours consumed, state of charge, power draw, and time to go so you are not guessing. Monitor More Than One Data Point: Extra input can measure second-battery voltage, battery temperature, or midpoint voltage for deeper system insight.
This batterymonitor lets you track the performance of your RV's batteries. Digital display monitorsbattery statistics like amp-hours consumed, state of charge, and voltage. ... Features: Batterymonitor lets you track the performance of your RV's batteries Works with 12V and 24V systems Compatible with lithium batteries Backlit, digital display monitorsbattery statistics Switch between voltage, current, power, battery capacity, state of charge, and remaining time Set custom alarms for low capacity and low voltage Flush-mountable for a sleek, integrated look Includes 500-amp shunt and 25' cable Specs: Working voltage: 10V - 12V Battery bank capacity range: 0.1 Ah - 999 Ah Operating temperature: -40 F to 120 F Dimensions: 3-15/16" long x 2-7/16" wide x 11/16" deep 3-Year limited warranty
Wireless, real-time tracking lets you keep an eye on your battery level from your smart phone via RedVision app. Check state of charge, voltage, current, and temperature. Works with AGM, LiFePO4, standard lead acid, gel, SLI, and calcium batteries.Features: Get accurate real-time battery level tracking on your smart phone via Bluetooth Works as a stand-alone device or with Redarc's RedVision products Provides data for one 12V battery Compatible with AGM, LiFePO4, standard lead acid, gel, SLI, and calcium batteries Check state of charge, voltage, current, and temperature on RedVision app Set alarms for low charge or low voltage Compact size fits in tight spaces Includes 500-amp shunt, 40" battery sense lead cable, 79" R-Bus cable, and 1 alternative M10 x 20 mm bolt Specs: Operating voltage: 9V - 32V Maximum battery capacity: 500 Ah Operating temperature: -4 F to 140 F Dimensions: 4-3/4" long x 2" wide x 1-3/4" tall 2-Year warranty
Monitor important information about your battery bank with this touchscreen color display. Bluetooth connectivity lets you check battery performance from your smartphone. ... Features: Batterymonitor lets you track the performance of your RV's batteries Works with 12V and 24V systems Compatible with lithium batteries Backlit, color touchscreen can be flush mounted vertically or horizontally Displays voltage, current, power, state of charge, and remaining time Alarms for low capacity and low voltage Bluetooth connectivity lets you see information on the Go Power Connect app 500-Amp shunt and 25' cable are included RV-C compatible Specs: Supply voltage: 12V - 24V Battery bank capacity range: 0.1 Ah - 999 Ah Operating temperature: -4 F to 122 F Dimensions: 2-3/4" long x 4-3/4" wide x 3/4" deep Cutout dimensions: 2-3/8" long x 4-3/8" wide x 3/4" deep Weight: 1 lb 3-Year limited warranty
... Built-in protection turns off USB charging when vehicle is parked. Batterymonitor lets you see battery status at a glance. 80" Long cable can be routed where power is needed.Features: SAE to USB charger with batterymonitor lets you power your USB devices and keep and eye on your battery status 3.3 Amp charger adapts to connected device for safe charging Stops charging when vehicle is in park to protect your batteryBatterymonitor displays status with blinking LEDs 80" Cable can be routed from SAE connector to where power is needed - handlebar, tank bag, or pannier USB port easily zip-ties to mounting location Includes weatherproof cap to seal USB port when not in use Specs: Input: 12V AGM or 12.8V lithium battery Charging amps: 3.3 @ 5 volts Length: 80" 3-Year limited replacement warranty Note: Requires an SAE battery lead or an SAE outlet to operate (sold separately)
Charge your phone, GPS or other USB device from your motorcycle or ATV's DIN 12 mm port. Built-in protection turns off charging when vehicle is parked. Batterymonitor works with AGM and lithium batteries; lets you see battery status at a glance.Features: Combination USB charger and batterymonitor lets you power your USB devices and keep and eye on your battery status 3.3 Amp charger adapts to each connected device for safe charging Stops charging when vehicle is in park Batterymonitor displays status with blinking LED 90-Degree elbow fits in tight spaces Includes weatherproof caps to seal USB ports when not in use Specs: Input: 12V AGM or 12.8V lithium battery Charging amps: 3.3 @ 5 volts 3-Year limited replacement warranty
... Built-in protection turns off USB charging when vehicle is parked. Batterymonitor works with AGM and lithium batteries; lets you see battery status at a glance.Features: Combination USB charger and batterymonitor lets you power your USB devices and keep and eye on your battery status 2.4 Amp charger adapts to connected device for safe charging Stops charging when vehicle is in park Batterymonitor displays status with blinking LEDs Includes weatherproof cap to seal USB port when not in use Specs: Input: 12V AGM or 12.8V lithium battery Charging amps: 2.4 @ 5 volts Length: 3-14" 3-Year limited replacement warranty Note: Requires an SAE battery lead or an SAE outlet to operate (sold separately)
Charge your phone, GPS or other USB device from your motorcycle or ATV's DIN 12 mm port. Built-in protection turns off charging when vehicle is parked. Batterymonitor works with AGM and lithium batteries; lets you see battery status at a glance.Features: Combination USB charger and batterymonitor lets you power your USB devices and keep and eye on your battery status 3.3 Amp charger adapts to each connected device for safe charging Stops charging when vehicle is in park Batterymonitor displays status with blinking LED Includes weatherproof caps to seal USB ports when not in use Specs: Input: 12V AGM or 12.8V lithium battery Charging amps: 3.3 @ 5 volts 3-Year limited replacement warranty
Charge your phone, GPS or other USB device from your motorcycle or ATV's battery. Kit includes battery lead to SAE connector to batterymonitor to USB port. Built-in protection turns off USB charging when vehicle is parked.Features: Battery to USB charger kit lets you power your USB devices and keep an eye on your battery status 80" Cable can be routed from battery to where power is needed - handlebar, tank bag, or pannier 3.3 Amp charger adapts to connected device for safe charging USB port stops charging when vehicle is in park to protect your batteryBatterymonitor displays status with blinking LEDs USB port easily zip-ties to mounting location Includes weatherproof cap to seal USB port when not in use Kit includes battery lead with in-line 15-amp fuse to SAE cable, and SAE to batterymonitor to USB cable Specs: Input: 12V AGM or 12.8V lithium battery Charging amps: 3.3 @ 5 volts Length: 80" 3-Year limited replacement warranty
This powerful, all-weather, 6-step charger uses a patented pulse-maintenance system to charge and maintain 12V batteries. Designed to charge small batteries like those for motorcycles, snowmobiles, yard maintenance machines and trailer breakaway kits.Features: 6-Step fully automatic system constantly monitors and maintains 12V battery charge Performs reliably and is virtually maintenance free Won't overcharge or undercharge like typical trickle chargers Switches automatically to pulse-maintenance phase when full charge has been reached Reduces risk of overheating, sulfation and premature battery failure Easy-to-use, quick-disconnect system features Comfort Connect end plugs - charger plugs right in Eyelet-terminal cable permanently attaches to battery terminals Clamp-terminal cable temporarily clamps to battery terminals Safe, versatile design Approved for indoor and outdoor use Prevents reverse-polarity mistakes Convenient accessories (sold separately) provide additional security and convenience LED indicator battery cable lets you monitor your battery's charge at a glance Additional battery-hookup cables simplify charging multiple vehicles Includes 12V battery charger, 1 set of 16" battery cables with battery-terminal clips, 1 set of 16" battery cables with M6 (6.4-mm) eyelet terminals, owner's manual and protective case Specs: Application: most starter and deep-cycle, 12V lead-acid batteries Includes wet, MF , AGM and most gel batteries Charges batteries with capacities from 1.2 Ah to 32 Ah Maintains batteries with capacities up to 100 Ah Charge cycle: 6-step, fully automatic charger with pulse maintenance Input voltage: 110 V AC - 120V AC Charging voltage: 14.4V Charging current: 0.8A Dimensions: 5-1/2" long x 2" wide x 1-1/2" tall 5-Year warranty This CTEK charger comes with two battery cables: one with clamp terminals and one with eyelet terminals.
This powerful, all-weather, 7-step charger uses a patented pulse-maintenance system to charge and maintain 12V or 16V batteries. Charges standard 12V automotive batteries and 16V batteries used for racing.Features: 7-Step system constantly monitors and maintains 12V or 16V battery charge Performs reliably and is virtually maintenance free Won't overcharge or undercharge like typical trickle chargers Switches automatically to pulse-maintenance phase when full charge has been reached Reduces risk of overheating, sulfation and premature battery failure 4 Charge modes 12V Wet: for standard 12V lead-acid batteries 12V AGM : for 12V AGM batteries 16V Wet: for standard 16V lead-acid batteries 16V AGM: for 16V AGM batteries Safe, versatile design Approved for indoor and outdoor use Prevents reverse-polarity mistakes Easy-to-use, quick-disconnect system features Comfort Connect end plugs - charger plugs right in Eyelet-terminal cable permanently attaches to battery terminals Clamp-terminal cable temporarily clamps to battery terminals Convenient accessories (sold separately) provide additional security and convenience LED indicator battery cable lets you monitor your battery's charge at a glance Additional battery-hookup cables simplify charging multiple vehicles Includes 12V battery charger, 1 set of 16" battery cables with battery-terminal clips, 1 set of 16" battery cables with M10 (10.5-mm) eyelet terminals, owner's manual and protective case Specs: Application: most starter and deep-cycle, 12V and 16V lead-acid batteries Includes wet, MF , AGM and most gel batteries Charges and maintains batteries with capacities from 14Ah to 225Ah for 12V and from 10Ah to 160Ah for 16V Charge cycle: 7-step, fully automatic charger with pulse maintenance Input voltage: 100 V AC - 115V AC Maximum charging voltage: 14.4V for 12V wet 14.7V for 12V AGM 19.2V for 16V wet 19.6 for 16V AGM Charging current: 7A max for 12V, 5A max for 16V Dimensions: 8-1/2" long x 3-1/2" wide x 1-7/8" tall 2-Year warranty This CTEK charger comes with two battery cables: one with clamp terminals and one with eyelet terminals.
This powerful, all-weather eight-step charger uses a patented, pulse-maintenance system to charge, maintain and help recondition 12V batteries. Backup power supply allows you to change vehicle batteries without losing complicated program settings.Features: Reliable, maintenance-free, 8-step system constantly monitors and maintains 12V battery charge Won't overcharge or undercharge like common trickle chargers Switches automatically to pulse-maintenance phase when full charge has been reached Reduces risk of overheating, sulfation and premature battery failure Makes use of an internal power supply during battery changes to preserve your vehicle settings Restores the power capacity of stratified batteries w/ special Reconditioning Mode Easy-to-use, quick-disconnect system Includes 2 battery-cable attachment systems w/ Comfort Connect end plugs - charger plugs right in Eyelet-terminal cable permanently attaches to battery terminals Clamp-terminal cable temporarily clamps to battery terminals Safe, versatile design Approved for indoor and outdoor use Prevents reverse-polarity mistakes Convenient accessories (sold separately) provide additional security and convenience Know your battery's charge level at a glance w/ optional LED-indicator battery cable Reduce the hassle of charging multiple vehicles w/ additional battery-hookup cables Specs: Application: most starter and deep-cycle, 12V, lead-acid batteries - including wet, MF , AGM and most gel batteries Charges batteries w/ capacities from 14 Ah - 150 Ah Maintains batteries w/ capacities up to 225 Ah Charge cycle: 8-step, fully automatic charger w/ pulse maintenance and Reconditioning Mode Dimensions: 8-1/2" long x 3-1/2" wide x 1-7/8" tall Includes: 12V Battery charger (w/ 5' battery-connection cable and 6' power cord attached) 1 Set of 16" battery cables w/ battery-terminal clips 1 Set of 16" battery cables w/ M10 (10.5-mm) eyelet terminals Owner's manual Protective case 5-Year warranty This CTEK charger comes w/ two battery cables: one w/ clamp terminals and one w/ eyelet terminals.
Battery management system charges and maintains your auxiliary batteries. Compatible with lithium as well as traditional lead acid, gel, calcium, and AGM batteries. 100-Amp output. ... Features: State-of-the-art battery management system charges and maintains your auxiliary batteries Ideal for RV and marine applications, caravans, and camper trailers with multiple battery banks Smaller, lighter, and more accurate than comparable systems Incorporates AC, DC, and solar inputs to charge multiple auxiliary batteries simultaneously Monitors and calculates power usage so you always know how much power is remaining and where your power is coming from User-friendly, color display monitor for convenient power management Solar prioritized over other sources for maximum efficiency Operates like 6 products in 1 - auxiliary battery charger, 110-volt charger, solar regulator, battery isolator, load disconnect controller, and remote batterymonitor Allows a Bluetooth connection to your mobile phone via the RedVision App Provides the same data and control available on the display monitor in the palm of your hand Includes lithium profile to let you charge lithium iron phosphate (LiFePO4) batteries as well as traditional lead acid, gel, calcium, and absorbed glass mat (AGM) batteries Sensor allows charging of non-lithium auxiliary batteries in freezing temperatures Made in Australia Specs: Application: all vehicles and alternator systems, including variable voltage alternators System output: 12V DC Current output: 100 amps Output power: 1600 watts Input (operating) voltage: 110V AC / 9V - 32V DC 2-Year warranty
Filters
