These brackets let you create a fold-out workbench or seat in your enclosed trailer. Telescoping legs let you adjust height of bench. Mount to X track and E track rails. ... Features: Brackets help create a workbench or seat in your enclosed trailer Installation requires (1) 24" wide board (not included) Pre-drilled holes allow you to secure board to brackets with screws (not included) Telescoping legs with adjustable feet let you adjust and fine-tune height of bench or seat Legs and brackets fold flat against wall for storage Easy installation - just snap spring-loaded fitting into E track or X track anchor points Brackets can be easily moved from one E track or X track slot to another Heavy-duty steel construction with corrosion-resistant zinc finish Specs: Quantity: 2 brackets Weight capacity: 600 lbs Adjustable height: 26" - 40" Bracket length: 24" Mounting hole diameter (each): 1/4" Weight (each): 11.1 lbs 1-Year limited warranty
Folding RV stabilizer helps reduce bouncing and swaying in your parked trailer or RV when you enter or exit. Easily sets up with no tools. ... Features: Stabilizer helps reduce bouncing and swaying in your parked RV or trailer Quick and easy setup requires no tools Tighten strap to pull legs in for increased height Loosen strap to spread legs out for less height Durable nylon strap with steel buckle has a 1,000-lb ratchet strength Folds up for compact, convenient storage Storage bag is included Lightweight aluminum construction Corrosion-resistant anodized silver power coat finish Specs: Application: trailers and RVs with 14" - 28" of clearance between the frame and the ground Individual leg length: 27" 1-Year warranty
Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. Black powder coat finish resists corrosion. Includes 2 jacks and 1 handle.Features: Stabilizing jacks help keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jacks up for travel, down for use Drop legs extend so you can adjust the height Spring-loaded levers release drop legs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Installation hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity per jack: 650 lbs Maximum load the jack can lift Support capacity per jack: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 2 jacks 1-Year warranty Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Heavy-duty jack stabilizes your lightweight cargo or camper trailer. Leg telescopes to the ground when you release the lever. Jack swings up for storage. Black powder coat finish resists corrosion. Handle (SJ-100-HD) sold separately.Features: Stabilizing jack helps keep your trailer or camper level and steady Great for loading and unloading cargo or for camping Folding design lets you flip jack up for travel, down for use Drop leg extends so you can adjust the height Spring-loaded lever releases drop leg for use Steel handle (SJ-100-HD - sold separately) lets you easily fine-tune height adjustment Large foot provides stability Sturdy steel construction Black powder coat finish resists corrosion Bolt-on or weld-on installation Mounting hardware not included Specs: Bracket height: Retracted 11-1/2" Extended: 18" Drop leg travel: 6-1/2" Lift capacity: 650 lbs Maximum load the jack can lift Support capacity: 1,000 lbs Maximum vertical load the jack can support Mounting plate dimensions: 4" long x 1-7/8" wide 3" From center of hole to center of hole 7/16" Diameter holes Footplate dimensions: 4" long x 3-1/2" wide Quantity: 1 jack 1-Year warranty Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. Drop leg offers 13-1/2" of lift on top of the 15-1/4" screw travel. Foldaway handle included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has a claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube and zinc finished inner tube, footplate, and handle for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of handle mount): 24-1/4" Retracted 39-1/2" Extended Total lift: 28-3/4" Screw travel: 15-1/4" Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 7-7/8" long x 6" wide Handle radius: 9-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Weld-on jack has a retracted height of 24" and an extended height of 39-1/2". The square design provides superior side-load support. Drop leg offers 13-3/4" of lift on top of 15-1/2" of screw travel. Foldaway handle included.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black painted outer tube Zinc finished inner tube, footplate, and handle for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of handle mount): 24" Retracted 39-1/2" Extended Total lift: 29-1/4" Screw travel: 15-1/2" Drop leg travel: 13-3/4" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-1/2" long x 3-3/4" wide Handle radius: 9-5/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty
... Square design provides superior side-load support. Offers 15-1/4" of screw travel and 13-3/4" of drop leg travel. Includes foldaway topwind handle.Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Square jack provides more side-load capacity than round-tube jacks Topwind handle has a claw grip for comfortable, easy cranking Easily folds away for storage Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location Effortless greasing with built-in grease zerk Black powder coated outer tube Zinc finished inner tube, footplate, and handle for corrosion resistance Welded-on footplate minimizes sinking in soft ground Weld-on installation Specs: Height (from bottom of foot to top of handle mount): 24-1/4" Retracted 39-1/2" Extended Total lift: 29" Screw travel: 15-1/4" Drop leg travel: 13-3/4" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-7/8" long x 5-7/8" wide Handle radius: 9-3/4" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between bottommost holes 1-Year warranty
If the 25K lift capacity of the TJD-25100 isn't enough, adding this follow leg will double it! Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Drop leg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speed jack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Drop leg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Drop leg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
... This 3,500 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Specs Capacity & Lift: Maximum capacity: 3,500 lbs Screw travel: 18" Additional drop leg travel: 9.75", adjustable in 2" increments Motor & Power: 12V electric motor 7-way plug connection Wire gauge: 14 AWG LED work light Construction & Dimensions: Outer tube diameter: 2-1/4" Finish: e-coat and matte black powder coat Included Accessories: Manual backup crank handle Mounting hardware included Warranty: Limited Lifetime
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop LegAdjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop LegAdjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking.
... This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop LegAdjustment: Extends up to 9.75" for extra lift with pull-pin operation. Corrosion-Resistant Finish: E-coat and black powder-coated steel help fight rust.
When youre hitching up, you don't want to crank forever or stack blocks to get the height right. The drop leg gets you close fast, and the side-wind handle keeps your hands clear so you're not banging your knuckles while you crank.That shows up most when youre hooked to a loaded trailer and need to make small adjustments. Specs Capacity: Static support capacity: 7,000 lbs Lift capacity: 1,800 lbs Dimensions: Retracted height: 23-1/2" Adjustable height range: 23-1/2" to 51" Screw travel: 14" Drop leg travel: 15" 24" tall x 10" wide x 8" deep Weight: 22 lbs Warranty: 1-year limited
... This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.Bolt-On Design for Easy Install: Mounts fast with included hardware. Easy Drop LegAdjustment: Drop leg extends up to 4-1/2" for extra lift when you need it. Built to Last: E-coat and black powder coat help prevent rust and corrosion for the long haul.
... Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Easily-to-reach side-facing plunger pin deploys the drop leg Works best for setups where the jack is located behind the A-frame Spring return retracts the drop leg hands-free Drop leg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Heayv-duty internal compotents Durable 1" jack screw allows for heavy lifting Smooth screw travel - a second thrust bearing reduces friction and heat buildup Weather-resistant black painted inner and outer tubes Easy to maintain even in a long life of hard work Grease zerk fittings help keep gears working smoothly Footplate minimizes sinking in soft ground Weld-on installation Includes sidewind handle Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 25-3/4" Screw travel : 12-1/4" Drop leg travel : 13-1/2" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Diameter mounting hole Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength. The built-in grease zerk allows for effortless greasing. Sidewind crank (TJD-12000-HD) sold separately.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Footplate minimizes sinking in soft ground Weld-on installation Handle (TJD-12000-HD) sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 25-3/4" Screw travel : 12-1/4" Drop leg travel : 13-1/2" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Mounting hole diameter Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
... The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift.
... The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift.
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift.
Filters
