9" Wide x 66" long x 19-3/4" tall. These sturdy teardrop fenders each have a flat back to mount flush with your trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Round trailer axle beam measures 72" from hub-face-to-hub-face and 58" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.
Round trailer axle beam measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LG-142178 - sold separately). Retracted height is 32-3/4". Extended height is 53-1/4".Features: Landing gear set lets you raise and lower your trailer Ideal for 5th-wheel trailers and RVs Connecting rod allows for simple, tandem operation Footplates offer stability and prevent sinking Durable, black powder coated outer tubes and zinc-finished inner tubes provide excellent corrosion resistance Manual hand crank included 12V DC motor (LG-142178 - sold separately) is available Specs: Leg height: Retracted: 32-3/4" Extended: 53-1/4" Total lift: 36-1/2" Screw travel: 20-1/2" Drop leg travel: 16" Outer tube length: 29-1/2" Combined weight capacity: 8,000 lbs Gear ratio 3:1 Distance between legs: 44-1/2" When positioned as close together as possible 72" When positioned as far apart as possible Footplate dimensions: 8" long x 6-1/8" wide Adjustment hole spacing on drop leg: 1" from center of hole to center of hole Distance from bottom of upper weld stop to top of lower weld stop: 15-1/2" Distance from top of upper weld stop to bottom of lower weld stop: 17-1/2" 1-Year warranty Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Round trailer axle beam measures 72" from hub-face-to-hub-face and 58" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 12" wheels.
Round trailer axle beam measures 72" from hub-face-to-hub-face and 58" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 14" wheels.
Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (LC142178) sold separately. Retracted height is 32-3/4". Extended height is 53-1/4".Features: Landing gear set lets you raise and lower your trailer Ideal for 5th-wheel trailers and RVs Connecting rod allows for simple, tandem operation Footplates offer stability and prevent sinking Durable, black powder coated outer tubes and zinc-finished inner tubes provide excellent corrosion resistance Manual hand crank (RVLG-HDL) sold separately 12V DC motor (LC142178 - sold separately) is available Switch (LG-145236 - sold separately) is available Specs: Leg height: Retracted: 32-3/4" Extended: 53-1/4" Total lift: 36-1/2" Screw travel: 20-1/2" Drop leg travel: 16" Combined weight capacity: 8,000 lbs Gear ratio 3:1 Distance between legs: 44-1/2" When positioned as close together as possible 72" When positioned as far apart as possible Footplate dimensions: 8" long x 6-1/8" wide Adjustment hole spacing on drop leg: 1" from center of hole to center of hole Distance from bottom of upper weld stop to top of lower weld stop: 15-1/2" Distance from top of upper weld stop to bottom of lower weld stop: 17-1/2" 1-Year warranty Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
When groceries keep getting crammed into a small RV fridge, food ends up buried or tossed. This 17 cu. ft. French-door refrigerator adds home-style storage, so fresh and frozen foods stay organized and easy to reach.The black glass finish brings a more residential appearance to your kitchen space, creating a coordinated look that feels closer to what many RV owners expect from a premium appliance package. Specs Capacity: 17 Cu. Ft. Electrical: Power required: 12V DC Amps: 12 Dimensions and Weight: Overall dimensions: 32-5/8" x 26-1/2" x72" Weight: 222.7 lbs Temperature Range: Fridge: 33.8 to 44.6 degrees F Freezer: 0.4 to 10.4 degrees F Construction and Finish: Color: black Refrigerant: R600a Warranty: 1-Year
Get full patio coverage with an extra-large canopy that offers more shade than a standard awning, perfect for tall RVs. Easy pitch adjustment protects you from the sun, while automatic rain dump protects your awning from stormy weather.Features: Extra-large awning creates a large, covered patio for your RV Extra 1'8" of canopy gives you 20% more shade than standard 8' awnings Ideal for Class A motorhomes, 5th-wheel trailers, or RVs with slide-outs underneath the awning Power awning extends and retracts with the flip of a switch Included switch kit can be mounted inside or outside of RV Manual override lets you operate the awning with a power drill (not included) if power is lost Automatic rain dump drops one side of the awning to drain pooling rainwater Keeps fabric from tearing and awning arms from bending under extreme weight Easy manual pitch adjustment allows you to block out the sun throughout the day Does not require readjustment before retracting Heavy-duty, durable fabric is made with premium 13.5-oz vinyl Cold-crack tested to -25 F Heat-welded seams prevent leaks Simple installation with included hardware Electric motor connects to RV for power Awning rail (LC715217 - sold separately) required to attach fabric to RV Butyl tape (sold separately) is recommended to seal brackets Black Fade fabric matches included roller tube and arms Black weatherguard provides extra protection against the elements Made in the USA Specs: Awning width: 20' Measured from the center of each arm Installation tips: Double-check that you have at least 78" of space on the wall from the awning rail straight down for each bracket There needs to be at least 4-1/2" clearance between the awning rail and the top of the entry door Dimensions: Wall-mounted brackets: 78" tall Outer arm: 72" long Inner arm: 58-1/8" long Pitch arm: 17" long Roller tube: 20' wide Fabric (when awning is fully extended): 19' 1" wide x 9'8" long Motor voltage: 12 volts Warranty: 1-Year limited on awning roller 1-Year on electric components 5-Year on fabric More Awning, More Shade If you're getting a new awning, why not get more of it?
Hub is designed for use on trailer idler axles. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint finish Pre-greased idler hub is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated QAI and CSA certified Specs: Application: 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2" Wheel stud dimensions: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 2.72" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
This hub-and-drum assembly fits 7,000-lb E-Z Lube axles with #42 spindles. Compatible with electric and hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and cone nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and 90-degree cone nuts are included Hub and drum are made in the USA Specs: Application: 7,000-lb E-Z Lube axles with #42 spindles Wheel size: 16" to 17-1/2" Drum dimensions: 12" diameter x 2" wide Works with 12" electric and hydraulic brake assemblies Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel stud diameter: 9/16"-18 Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing : 25580 (1.750" inner diameter) Outer bearing: 14125A (1.250" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Outer diameter: 3.376" Inner diameter: 2.25" E-Z Lube-Compatible Hub for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Hub is designed for use on trailer idler axles. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint finish QAI and CSA certified Specs: Application: 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2" Wheel stud dimensions: 9/16" diameter x 1-9/16" long Grease cap flange diameter: 2.72" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy.
Radial tire has a 16-ply rating and a 4,806-lb max load at 125 psi. 17-1/2" x 6-3/4" Hub-piloted solid center wheel has an 8 on 6-1/2 bolt pattern and -0.5" offset.
Get full patio coverage with an extra-large canopy that offers more shade than a standard awning, perfect for tall RVs. Easy pitch adjustment protects you from the sun, while automatic rain dump protects your awning from stormy weather.Features: Extra-large awning creates a large, covered patio for your RV Extra 1'8" of canopy gives you 20% more shade than standard 8' awnings Ideal for Class A motorhomes, 5th-wheel trailers, or RVs with slide-outs underneath the awning Power awning extends and retracts with the flip of a switch Included switch kit can be mounted inside or outside of RV Manual override lets you operate the awning with a power drill (not included) if power is lost Automatic rain dump drops one side of the awning to drain pooling rainwater Keeps fabric from tearing and awning arms from bending under extreme weight Easy manual pitch adjustment allows you to block out the sun throughout the day Does not require readjustment before retracting Heavy-duty, durable fabric is made with premium 13.5-oz vinyl Cold-crack tested to -25 F Heat-welded seams prevent leaks Simple installation with included hardware Electric motor connects to RV for power Awning rail (LC715217 - sold separately) required to attach fabric to RV Butyl tape (sold separately) is recommended to seal brackets Black Fade fabric matches included roller tube and arms Black weatherguard provides extra protection against the elements Made in the USA Specs: Awning width: 19' Measured from the center of each arm Installation tips: Double-check that you have at least 78" of space on the wall from the awning rail straight down for each bracket There needs to be at least 4-1/2" clearance between the awning rail and the top of the entry door Dimensions: Wall-mounted brackets: 78" tall Outer arm: 72" long Inner arm: 58-1/8" long Pitch arm: 17" long Roller tube: 19' wide Fabric (when awning is fully extended): 18' 1" wide x 9'8" long Motor voltage: 12 volts Warranty: 1-Year limited on awning roller 1-Year on electric components 5-Year on fabric More Awning, More Shade If you're getting a new awning, why not get more of it?
Get full patio coverage with an extra-large canopy that offers more shade than a standard awning, perfect for tall RVs. Easy pitch adjustment protects you from the sun, while automatic rain dump protects your awning from stormy weather.Features: Extra-large awning creates a large, covered patio for your RV Extra 1'8" of canopy gives you 20% more shade than standard 8' awnings Ideal for Class A motorhomes, 5th-wheel trailers, or RVs with slide-outs underneath the awning Power awning extends and retracts with the flip of a switch Included switch kit can be mounted inside or outside RV Manual override lets you operate the awning with a power drill (not included) if power is lost Automatic rain dump drops one side of the awning down to drain pooling rainwater Keeps fabric from tearing and awning arms from bending under extreme weight Easy manual pitch adjustment allows you to block out the sun throughout the day Does not require readjustment before retracting Heavy-duty, durable fabric is made with premium 13.5-oz vinyl Cold-crack tested to -25 F Heat-welded seams prevent leaks Simple installation with included hardware Electric motor connects to RV for power Awning rail (LC715217 - sold separately) required to attach fabric to RV Butyl tape (sold separately) is recommended to seal brackets Black Fade fabric matches included roller tube and arms Black weatherguard provides extra protection against the elements Made in the USA Specs: Awning width: 11' Measured from the center of each arm Installation tips: Double-check that you have 78" of space on the wall from the awning rail straight down for each bracket There needs to be at least 4-1/2" clearance between the awning rail and the top of the entry door Dimensions: Wall-mounted brackets: 78" tall Outer arm: 72" long Inner arm: 58-1/8" long Pitch arm: 17" long Roller tube: 11' wide Fabric (when awning is fully extended): 10' 1" wide x 9'8" long Motor voltage: 12 volts Warranty: 1-Year limited on awning roller 1-Year on electric components 5-Year on fabric More Awning, More Shade If you're getting a new awning, why not get more of it?
Radial trailer tire with deep, rugged tread has an 8-ply rating and a 2,860-lb max load at 65 psi. The 15" x 6" aluminum trailer wheel has a 5 on 4-1/2 bolt pattern and a corrosion resistant, matte black powder coat finish.
Get full patio coverage with an extra-large canopy that offers more shade than a standard awning, perfect for tall RVs. Easy pitch adjustment protects you from the sun, while automatic rain dump protects your awning from stormy weather.Features: Extra-large awning creates a large, covered patio for your RV Extra 1'8" of canopy gives you 20% more shade than standard 8' awnings Ideal for Class A motorhomes, 5th-wheel trailers, or RVs with slide-outs underneath the awning Power awning extends and retracts with the flip of a switch Included switch kit can be mounted inside or outside of RV Manual override lets you operate the awning with a power drill (not included) if power is lost Automatic rain dump drops one side of the awning to drain pooling rainwater Keeps fabric from tearing and awning arms from bending under extreme weight Easy manual pitch adjustment allows you to block out the sun throughout the day Does not require readjustment before retracting Heavy-duty, durable fabric is made with premium 13.5-oz vinyl Cold-crack tested to -25 F Heat-welded seams prevent leaks Simple installation with included hardware Electric motor connects to RV for power Awning rail (LC715217 - sold separately) required to attach fabric to RV Butyl tape (sold separately) is recommended to seal brackets Black Fade fabric matches included roller tube and arms Black weatherguard provides extra protection against the elements Made in the USA Specs: Awning width: 17' Measured from the center of each arm Installation tips: Double-check that you have 78" of space on the wall from the awning rail straight down for each bracket There needs to be at least 4-1/2" clearance between the awning rail and the top of the entry door Dimensions: Wall-mounted brackets: 78" tall Outer arm: 72" long Inner arm: 58-1/8" long Pitch arm: 17" long Roller tube: 17' wide Fabric (when awning is fully extended): 16' 1" wide x 9'8" long Motor voltage: 12 volts Warranty: 1-Year limited on awning roller 1-Year on electric components 5-Year on fabric More Awning, More Shade If you're getting a new awning, why not get more of it?
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.Specs: Application & Capacity Axle rating: 5,200 - 7,000 lbs Spindle compatibility: #42 Wheel size: 16" to 17-1/2" Brake type: compatible with electric brakes Drum size: 12" diameter x 2" wide Weight capacity per hub: 3,500 Quantity: 1 assembly Bolt Pattern Pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" If you need help figuring out your bolt pattern, just scroll down for directions Included Components Bearing: 14125A I.D: 1.250" Bearing: 25580 I.D: 1.75" Grease seal: GS-2250DL I.D: 2.25" O.D: 3.376" Grease cap (drive-in, EZ Lube): DC-275L O.D: 2.72" Grease cap plug: DC-RP Lug nuts: 6-109 Nut retainer: 6-190 or 006-190-00 Spindle jam nut: 6-191 Diameter: 1" Bearing races: included and pre-installed Material Type Hub and drum: iron
Submersible, on-board smart charger draws power from a wall outlet to charge and maintain up to (2) 12V batteries at 5-amps. Fully-sealed, waterproof construction is ideal for marine applications. Saltwater tested and ignition protected for safety.Features: On-board AC-to-DC smart charger quickly charges and maintains up to 2 batteries Perfect for boats, trolling motors, generators, electric vehicles, and industrial equipment 2 Battery banks allow multiple 12V batteries to be charged simultaneously Provides full charge output even with low or varying AC current input Multiple battery profiles let you charge a variety of battery types 12V Modes - normal, AGM, and lithium-ion, Force mode - charge dead batteries below 1-volt Multi-stage charging algorithm charges 2x faster than traditional chargers without overcharging Analyzes battery condition to provide a customized charge Built-in battery desulfator restores lost battery capacity Heavy-duty 3/8" eyelet connectors provide maximum contact with terminals Built-in 7.5-amp fuses protect electronics from dangerous overloads Completely sealed, waterproof design is fully submersible - perfect for marine applications Tested to resist saltwater corrosion AC port plug (sold separately) creates a connection point for easy access to AC power Specs: Application: 12V batteries up to 120 amp-hours Battery types supported: wet cell, gel cell, AGM, enhanced flooded, maintenance-free, and Lithium-ion Lithium-ion batteries must have battery management systems (BMS) Number of battery banks: 2 Maximum charging amperage: 10 amps 5 amps per battery bank Eyelet cable length: 72" AC cable length: 72" Working voltage: 120 - 240 VAC (50 - 60 Hz) Maximum power consumption: 145 watts Low voltage detection rating: 1-volt IP rating: 68 Dimensions: 7" long x 5-5/8" wide x 2-1/4" thick Weight: 4.17 lbs 3-Year limited warranty The rugged NOCO Genius GEN series on-board smart charger quickly charges and maintains up to (2) 12-volt lead-acid and lithium-ion batteries, simultaneously.
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.Specs: Application & Capacity Axle rating: 8,000 lbs Spindle compatibility: requires 2.25" I.D. seal Wheel size: 16" to 17-1/2" Brake type: compatible with electric brakes Drum size: 12" diameter x 3-3/8" wide Weight capacity per hub: 4,000 lbs Quantity: 1 assembly Bolt Pattern Pattern: 8 on 6-1/2" Wheel bolt diameter: 9/16" If you need help figuring out your bolt pattern, just scroll down for directions Included Components Bearing: 02475 I.D: 1.250" Bearing: 25580 I.D: 1.75" Grease seal: 10-36 I.D: 2.25" O.D: 3.376" Grease cap (drive-in, EZ Lube): DC-275L O.D: 2.72" Grease cap plug: DC-RP Lug nuts: 6-53 Nut retainer: 6-190 or 006-190-00 Spindle jam nut: 6-191 Diameter: 1" Bearing races: included and pre-installed Material Type Hub and drum: Iron
Full-contact, weatherproof heating pad helps prevent your RV holding tank or step from freezing. Built-in thermostat automatically turns the heating pad on and off depending on the temperature of the tank or step. Easy, peel-and-stick installation.Features: Full-contact heater pad keeps your exposed RV holding tank or step warm during freezing temperatures Works with tanks with a 29- to 40-gallon capacity Can also thaw out a tank system or a step if it's already frozen Built-in thermostat automatically operates the heater pad Turns on when the tank or step temperature reaches 45 degrees F Turns off when the tank or step temperature reaches 67 degrees F Flexible, weatherproof carbon fiber material bends to fit the contours of a surface Easy, peel-and-stick installation onto the bottom of your tank or step 2-Wire design with 16-gauge wires White wire is for ground Red wire is for power Compatible with DC power when in transit Runs through a converter while connected to a power source when your RV is parked Cold room tested down to -32 degrees F QAI certified Specs: Pad dimensions: 25" long x 7-1/4" wide Pad thickness: 3 mm Length of wires: 36" Input voltage: 13.5V DC Power draw: 5.8 amps Wattage: 78 watts 1-Year warranty The Therma Heat RV tank and step heating pad meets the following certification standards: Safety for Electric Heating Appliances, UL499 Safety for Heating Elements ( CSA ) C22.2 No. 72-m1984 (R2004) Flammability tests ( UL ) 746C, 15 and CSA 0.17,9,2 Dieletric Voltage Withstand Test (UL) - 1000 volts/1 minute Thermal Aging Test (UL) Note: This heater pad should be installed on non-conductive surfaces only.
Galvanized hub-and-drum assembly is great for marine use. Fits 5,200-lb to 7,000-lb E-Z Lube axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Marine-grade trailer hub-and-drum provides surface area for brake shoes to grip when brake is activated Includes bearings, races, grease seal, grease cap, and zinc-coated lug nuts Zinc plating has a 500-hour salt spray rating Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Hub and drum are made in the USA Specs: Application: 5,200-lb, 6,000-lb, and 7,000-lb EZ-Lube axles with #42 spindles Wheel size: 16" to 17-1/2" Drum dimensions: 12" diameter x 2" wide Works with 12" x 2" electric and hydraulic brake assemblies Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel bolt dimensions: 1/2" diameter x 2-11/16" long Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" Corrosion Resistance for Marine Use This trailer hub-and-drum assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer.
Filters
