This 3-wire adapter harness allows you to install a Peterson LED light using an existing 3-prong trailer wiring harness. Harness has a female PL-3 plug to connect to your existing wiring and a male AMP-style connector for the LED.Features: Y-adapter harness allows you to install a Peterson LED light using an existing 3-prong trailer wiring harness Designed specifically for use with stop/tail/turn lights, parking/turn lights, and warning lights with 3-wire AMP-style connections Male AMP-style plugs connect to an LED light Female PL-3 plug connects to truck or trailer 3-Wire harness White wire for ground Black wire for tail light Red wire for turn signal Overall wire length: 7-3/4" Made in the USA
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). ... With any trailer connector it can be easy to forget to disconnect the wiring when you unhook your trailer. If you drive off without disconnecting a standard 7-way plug, the connector will get pulled out of the socket, likely tearing off the lid.
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 3-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wireWire length: 10" Pigtail is a direct replacement for: Uni Bond PT9530 Truck Lite 94993 Grote 66843-3 Peterson 421-491
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power Wire length: 6" Pigtail is a direct replacement for: Uni Bond # PT6020 Wesbar # 108662 Truck Lite # 94902 Grote # 67050 Peterson #142-49 Bargman # 40-00-002
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 10" long. ... Features: Pigtail with 3-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wire 20-Gauge wire Approximate wire length: 10" Pigtail is a direct replacement for: Uni Bond PT9180 Wesbar 729063 Truck Lite 94926-3 Grote 67000 Peterson 431-491 Bargman 40-00-003
This 3-Wire, Y-adapter harness allows you to install 2 Peterson lights using an existing 3-prong trailer wiring harness. Harness has 2 male PL-3 plugs and 1 female PL-3 plug.Features: Y-adapter harness allows you to install 2 Peterson lights using an existing 3-prong trailer wiring harness Designed specifically for use with stop/tail/turn lights, parking/turn lights, and warning lights with PL-3 connections Male PL-3 plugs connect to 2 separate lights Female PL-3 plug connects to truck or trailer 3-Wire harness White wire for ground Black wire for tail light Red wire for turn signal Wire length: 12" Made in the USA
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 10" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics backup and utility lights Male-pin, 2-prong PL-3 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for power #10 Ring terminal on ground wire Approximate wire length: 10" Pigtail is a direct replacement for: Wesbar # 729062 Truck Lite # 94925 Grote # 67010 Peterson # B431-49
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 18" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power #10 Ring terminal on ground wireWire length: 18" Pigtail is a direct replacement for: Wesbar 108663 Peterson B142-50
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics backup and utility lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 2-prong PL-3 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for power #10 Ring terminal on ground wire Approximate wire length: 10" Pigtail is a direct replacement for: Uni Bond PT6020 Truck Lite 94992 Grote 67010 Peterson 421-49
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 3-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson stop/tail/turn lights, parking/turn lights, and warning lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wireWire length: 10-1/2"
This 2-wire pigtail has a male plug to connect to the female socket on your trailer light. 6" Power wire splices into your trailer's wiring. ... Features: Pigtail with 2-prong plug allows you to wire your light to your trailer Designed for use with side marker, clearance, and utility lights Simple installation Connect plug to the back of your trailer light Splice loose wire into existing wiring on your trailer Made in the USA Specs: Wire length: 6" Wiring configuration White: ground Black: power Pigtail is a direct replacement for: Uni Bond: PT6020 Wesbar: 108662 Truck Lite: 94902 Grote: 67050 Bargman: 40-00-002
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Color-coded wire lead is 10-1/2" long. ... Features: Pigtail with 3-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson stop/tail/turn lights, parking/turn lights, and warning lights Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wireWire length: 10-1/2"
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 2-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson backup and utility lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for power #10 Ring terminal on ground wireWire length: 10-1/2"
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Peterson light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 2-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson side marker, clearance, and utility lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power #10 Ring terminal on ground wireWire length: 6" Made in the USA
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Designed for backup and utility lights. 19" Lead.Features: Pigtail with 2-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson backup and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for power #10 Ring terminal on ground wireWire length: 19"
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 135" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power Wire length: 135"
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 75" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power Wire length: 75"
This 3-wire, Y-adapter harness allows you to install 2 Peterson LED lights using an existing 3-prong trailer wiring harness. Harness has a female PL-3 plug to connect to your existing wiring and 2 male AMP-style connectors for the LEDs.Features: Y-adapter harness allows you to install 2 Peterson LED lights using an existing 3-prong trailer wiring harness Designed specifically for use with stop/tail/turn lights, parking/turn lights, and warning lights with 3-wire AMP-style connections Male AMP-style plugs connect to 2 individual LED lights Female PL-3 plug connects to truck or trailer 3-Wire harness White wire for ground Black wire for tail light Red wire for turn signal Wire length: 12" Made in the USA
This 2-wire pigtail has a 2-prong PL10 plug on one end that connects to the back of your Custer light. Designed specifically for side marker and clearance lights.Features: Pigtail with 2-prong plug lets you wire your Custer light to your trailer Designed specifically for use with Custer side marker and clearance lights Male-pin, 2-prong PL-10 plastic plug connects to the back of trailer light 2-Wire pigtail White wire for ground Black wire for power #10 Ring terminal on ground wire
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 36" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power Wire length: 36"
This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket.Features: 7- and 4-Pole trailer connector with mounting bracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant design Includes mounting bracket for easy, snap-in socket installation Black, epoxy-coated steel construction Mounts to bumper with included screws Specs: Application: Replaces factory 7-way connector on Chevrolet, Ford, GMC and Nissan trucks and SUVs Can be used to add a connector to 2003 and newer GM pickups and SUVs Bracket dimensions: 4-3/4" long x 3-1/16" tall x 1-3/4" deep Distance between mounting holes (center to center): 2-3/8" 1-Year limited warranty Note: Only one connector - a 4-way or a 7-way - can be used at a time because the covers on this socket will not open far enough to allow use of both plugs at the same time.
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat 4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers keep connectors clean when not in use Split loom keeps wires contained and well protected Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mounting bracket secures wiring to the vehicle or trailer hitch 1-Year limited warranty Specs: Distance between bracket mounting holes center to center: 2-1/4" Harness length: 17" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
... Integrated voltage regulation. Recessed mount with grommet (not included). Accepts standard 3-prong plug.Features: Oval trailer tail light serves 3 functions Turn signal light Tail light Brake light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Compatible with 12V DC systems Red lens over white LEDs Recessed mount with grommet (421-18 - sold separately) Mounts in any 360-degree position Accepts industry-standard 3-prong plug (421-491 - sold separately) DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 1-7/16" deep Diodes: 7 Power draw at 12V: Stop/turn: 0.22 amps Tail: 0.01 amps Input voltage: 9V - 16V DC 10-Year limited warranty PL-3 Wiring Connection This light has an industry-standard PL-3 connection as pictured above.
7-7/8" x 3-5/8" Oval. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. ... Features: Oval trailer tail light serves 3 functions Turn signal light Tail light Brake light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Compatible with 12V DC systems Red lens over white LEDs Recessed mount with built-in plastic flange Accepts industry-standard 3-prong plug (421-491 - sold separately) DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Overall dimensions: 7-7/8" long x 3-5/8" tall x 1-7/16" deep Light face dimensions: 6-1/2" long x 2-1/4" tall Diodes: 7 Power draw at 12V: Stop/turn: 0.23 amps Tail: 0.01 amps Input voltage: 9V - 16V DC 10-Year limited warranty PL-3 Wiring Connection This light has an industry-standard PL-3 connection as pictured above.
Filters
