2-Piece metal housing with perpendicular mounting bracket. Cycling automatic reset. rating: 40 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to
If your vehicle already has a 4-way flat, this kit includes everything you need to install an electric trailer brake controller and 7-way connector. If there's not an existing 4-way flat on your vehicle, you can purchase one separately. vehicle's battery via the included 40-ampcircuitbreaker Pre-wired 7- and 4-way trailer connector mounts easily at rear of vehicle with included bracket Plugs into existing 4-way trailer connector on vehicle
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Breaker prevents battery from draining and auxiliary application from overdrawing. Typically used on ... 200 degrees F (93 degrees C) 1-Year limited warranty 54-540 Pollak Single-Way, Thermal CircuitBreaker - Cycling/Automatic Reset - Straight Mounting Bracket - 40Amp Alternate to 9510
In-line 40-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... bracket hole diameter: 0.23" Housing: 1.28" long x 0.84" wide x 0.72" tall Current rating: 40 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 F to 150 F
Features: Works with electric brake controllers for trailers with 2, 4, 6, or 8 brake assemblies Includes: 25 ft. 10-2 Duplex wire 20 Ampcircuitbreaker 30 Ampcircuitbreaker40Ampcircuitbreaker
Trailer Brake Controller
Installation Kits
etrailer
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
This 2-in-1 AC/DC distribution panel and converter charger keeps your power systems easily accessible inside the RV. Works with lithium and lead acid batteries. Uses a custom charging profile for lithium and multistage charging for lead acid. circuits rated at 30 amps (using tandem breakers) DC distribution fuses: (2) 30 amp and (10) 20 amp Converter output: 45 amps Voltage: AC distribution rating: 120 VAC Converter input: 105 - 130 VAC Converter
This 2-in-1 AC/DC distribution panel and converter charger keeps your power systems easily accessible inside the RV. Works with lithium and lead acid batteries. Uses a custom charging profile for lithium and multistage charging for lead acid. branch circuits when you use tandem breakers. The DC section has 12 branch fuse holders capable of using (2) 30 amp and (10) 20 amp fuses. However, you will need to purchase AC breakers and DC fuses
This 2-in-1 AC/DC distribution panel and converter charger keeps your power systems easily accessible inside the RV. Works with lithium and lead acid batteries. Uses a custom charging profile for lithium and multistage charging for lead acid. circuits rated at 50 amps (using tandem breakers) DC distribution fuses: (4) 30 amp and (14) 20 amp Converter output: 60 amps Voltage: AC distribution rating: 240 VAC Converter input: 105 - 130 VAC Converter
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Circuitbreaker prevents battery from draining and auxiliary application from overdrawing. Typical uses ... compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current
This universal wiring kit lets you install an electric brake controller (sold separately) in your vehicle and a 7-way connector for your trailer lights at the same time. Plugs into the existing 4-way on your vehicle. circuitbreaker Pre-wired 7-way trailer connector mounts easily at rear of vehicle with mounting bracket (sold separately) Plugs into existing 4-way trailer connector on vehicle 30-Amp and 40-ampcircuit
In-line 50-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Breaker prevents battery from draining and auxiliary application from overdrawing. Typical uses ... 200 degrees F (93 degrees C) 1-Year limited warranty 54-530 Pollak Single-Way, Thermal CircuitBreaker - Cycling/Automatic Reset - 30 Amp Replaces 38630
In-line 30-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... Features: Metal housing with perpendicular mounting bracket 2-Piece design Mounting bracket attached to circuitbreaker by spot welding Cycling automatic reset Cycles continuously during over-current
This surface-mounted 100-amp Type III circuitbreaker remains open on overload and has a unique reset mechanism which provides visible indication of tripped condition. Typically used in auxiliary and ... ) Storage temperature: -30 F to 300 F (-34 C to 149 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than
In-line 50-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... Features: Metal housing with perpendicular mounting bracket 2-Piece design Mounting bracket attached to circuitbreaker by spot welding Cycling automatic reset Cycles continuously during over-current
This surface-mounted 60-amp Type III circuitbreaker remains open on overload and has a unique reset mechanism which provides visible indication of tripped condition. Typically used in auxiliary and ... ) Storage temperature: -30 F to 300 F (-34 C to 149 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than
In-line 30-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected
In-line 20-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... Features: Metal housing with perpendicular mounting bracket 2-Piece design Mounting bracket attached to circuitbreaker by spot welding Cycling automatic reset Cycles continuously during over-current
In-line 20-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current ... (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected
Filters
