Adapts your 1-1/4" hitch receiver for use with 2" accessories. Gain extra ground clearance with 5" rise or 4-1/4" drop. Hitch pin and clip or hitch lock sold separately.Features: Adapter converts your 1-1/4" trailer hitch receiver into a 2" receiver so that you can mount a bike rack, cargo carrier, or other 2" hitch accessory Built-in rise provides extra ground clearance Durable steel with matte black powder finish and e-coat that resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 1-1/4" x 1-1/4" trailer hitch receivers Hitch receiver size: 2" x 2" Maximum tongue weight: 350 lbs Rise: 5" Drop: 4-1/4" Overall length: 11-1/4" Hitch pin hole sizes: Shank: 1/2" Receiver: 5/8" Distance between hitch pin holes (center to center): 6-1/2" Distance from receiver end to center of nearest pin hole: 2-1/4" Distance from accessory end to center of nearest pin hole: 2-1/2" Distance from center of hitch pin hole to the back end of the accessory receiver: 3" Limited lifetime warranty Notes: Using this adapter will reduce your hitch's weight capacity by 50 percent.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolster bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolster brackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 3 Bolt holes for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 16-1/4" Dimensions of bolster bracket: 15" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-3/4" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolster bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolster brackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 3 Bolt holes allow for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 10-1/4" Dimensions of bolster bracket: 9-3/4" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-1/4" Vertical spacing between slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Raw, heat-treated hitch ball from B&W has a 1-1/4" diameter x 3-1/4" long shank with 12 threads per inch. Built-in rise lets you match ball to your trailer's height. Designed for heavy-duty towing.Features: Hitch ball provides connection point for your trailer's coupler Built-in rise lets you easily match ball to trailer height Trailer hitch ball sits an extra inch above the ball mount platform Fine threads (12 threads per inch) provide tight, strong grip Heat-treated steel is durable Raw finish Lock washer and nut included Made in the USA Specs: Ball diameter: 2-5/16" Shank dimensions: 1-1/4" diameter x 3-1/4" long Rise: 1" Weight capacity: 24,000 lbs
This ball mount is designed in a unique X-shape to drain water out of the shank and keep it rust-free. Comes with a locking pin to stop thieves.Features: Lockrail system on ball platform lets you torque the hitch ball down with a single wrench X-Shape shank drains moisture to avoid corrosion Built-in rise and drop Locking pin prevents theft 2 Keys included Dust cap blocks out dirt and moisture Durable steel with black matte finish Specs: Fits: 2" x 2" hitch receivers Ball diameter: 2" Locking pin diameter: 5/8" Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Rise: 4" Drop: 5-1/4" Overall length: 13" Center of pin hole to center of ball: 10" Limited 1-year warranty
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Each assembly attaches to the trailer frame with 2 U-bolts (sold separately) for a sturdy connection. Swivel brackets enable bunks to tilt when loading a boat.Features: Bolster-and-swivel-bracket assemblies allow you to install 2 bunk boards on your boat trailer Extra-sturdy connection to trailer frame ensures support for the bunk boards Each bolster bracket attaches with 2 U-bolts (sold separately), as opposed to a standard bracket that attaches with 1 U-bolt Mounting slots permit as much as 3" of height adjustment during installation Bolster brackets install vertically on your boat trailer's frame Heavy-duty swivel brackets let you tilt the bunk boards Helps you to fit the boat hull snugly onto your trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 3 Bolt holes for a strong, sturdy connection to the bunk board 7-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 12-1/4" Dimensions of bolster bracket: 11-3/4" tall x 4" wide Mounting slot dimensions: 3" long x 1/2" wide Horizontal spacing between slots: 1-1/4" Horizontal spacing between slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-1/2" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center 1-1/4" Between each of the 3 holes Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.Features: Lockrail system on ball platform lets you torque the hitch ball down with a single wrench X-Shape shank drains moisture to avoid corrosion Built-in rise and drop Hitch pin and clip included Specs: Fits: 2" x 2" hitch receivers Ball diameter: 2" Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Rise: 4" Drop: 5-1/4" Overall length: 13" Center of pin hole to center of ball: 10" Limited 1-year warranty
You need a wheel that handles the load and keeps your trailer moving. This black wheel with red stripes adds a clean detail that makes your setup feel more put together every time you head out.Built for Everyday Trailer Use: 13" by 4-1/2" Steel Wheel This is a size you see all the time for a reason. The 13 inch diameter and 4-1/2 inch width give you a practical foundation for everyday hauling, whether you are running short trips or putting in regular miles.
Get more ground clearance and a smoother ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, drop spindle lowers deck height for easy loading. Fits any trailer frame width. Includes inner (L68149) and outer (L44649) bearings.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 16-3/8" 1" 5" 0" 4-1/4" G H I J K L 5-5/8" 6" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" lift spindle raises deck height for additional clearance. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 17-11/16" 1" 5" 9-5/8" 4-1/4" G H I J K L 5-5/8" 6" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" lift spindle raises deck height for additional clearance. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 13-11/16" 1" 5" 7-1/2" 4-1/4" G H I J K L 5-5/8" 6" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" drop spindle lowers deck height for easy loading. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 16-1/2" 1" 5" 0" 4-1/4" G H I J K L 5-5/8" 6" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" drop spindle lowers deck height for easy loading. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 16-3/8" 1" 5" 0" 4-1/4" G H I J K L 5-5/8" 6" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 4" lift raises deck height. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 13-11/16" 1" 5" 7-1/2" 4-1/4" G H I J K L 5-5/8" 8-1/2" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 4" lift raises deck height. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 17-11/16" 1" 5" 9-5/8" 4-1/4" G H I J K L 5-5/8" 8-1/2" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" drop spindle lowers deck height for easy loading. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 20-1/2" 1" 5" 2-3/8" 4-1/4" G H I J K L 5-5/8" 6" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" lift spindle raises deck height for additional clearance. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 13-11/16" 1" 5" 7-1/2" 4-1/4" G H I J K L 5-5/8" 6" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
Keep your Dexter 10K slipper suspension tight with this 3/4" x 4-1/2" spring eye bolt. Sized for rubber bushed 10K general duty springs, it installs with the 6-113 locknut and HAP-258-03 equalizer kit.Features: Replaces a worn or damaged spring eye bolt on your Dexter 10K general duty slipper spring suspension 3/4" Diameter bolt is sized for Dexter springs with rubber bushings to keep the spring eye tight and supported Measures 4-1/2 inches long so it fits standard Dexter hangers and equalizers without excess bolt length 3/4"-10 Threaded end works with Dexter 6-113 locknut (sold separately) for a secure, long lasting clamp Compatible with HAP-258-03 Dexter tandem axle equalizer kit (sold separately) for 2-1/2 inch slipper springs
... Built-in shock absorption limits rattle and bottoming out. E-Z Lube, long spindle with 4" drop lowers deck height. Fits any trailer frame width.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system. A B C D E F 13" 16-1/2" 1" 5" 0" 4-1/4" G H I J K L 5-5/8" 8-1/2" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
Get more clearance and a smoother ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, standard-height spindle keeps your deck height the same. Fits any trailer frame width. Includes inner (L44649) and outer (L44649) bearings.A B C D E F 11-3/8" 13-13/16" 1" 5" 3-1/2" 3-3/4" G H I K L 4-5/8" 4-7/8" 3-7/8" 3-3/4" 3-1/8"
Get more clearance and a smoother ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, standard-height spindle keeps your deck height the same. Fits any trailer frame width. Includes inner (L44649) and outer (L44649) bearings.A B C D E F 11-3/8" 13-13/16" 1" 5" 3-7/8" 3-3/4" G H I K L 4-5/8" 4-7/8" 3-7/8" 3-3/4" 3-1/8"
Get more ground clearance and a smoother ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, drop spindle lowers deck height for easy loading. Fits any trailer frame width. Includes inner (L68149) and outer (L44649) bearings.Dimensions of the Timbren Axle-Less Suspension The following diagrams show measurements taken on the Timbren Axle-Less suspension system without hubs. A B C D E F 13" 13-11/16" 1" 5" 1/4" 4-1/4" G H I J K L 5-5/8" 6" 4-3/4" 1-3/4" 3-3/8" 3-11/16"
Bias tire has a ply rating of 6 and a 745-lb maximum load at 90 psi. The 8" diameter x 3-3/4" wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant powder coat finish.Features: Trailer tire by Kenda is designed for excellent handling at high speeds Steel wheel resists rust and corrosion White powder coat finish over e-coat primer Tire-and-wheel assembly meets Department of Transportation specifications Specs: Rim dimensions: 8" diameter x 3-3/4" wide Bolt pattern: 4 on 4" Wheel capacity: 910 lbs Wheel bolt size: 1/2"-20 Pilot diameter: 2.5" Offset: 0 Tire size: 4.80/4.00-8 Section width: 4.7" Outer diameter (when inflated): 16.1" Tire capacity: Load range: C Ply rating: 6 Maximum load: 745 lbs at 90 psi Warranty: 5-Year on tire Limited 1-year on wheel 1-Year Worry-Free Guarantee This tire has a 1-year worry-free guarantee.
Bias tire has a ply rating of 6 and a 745-lb maximum load at 90 psi. The 8" diameter x 3-3/4" wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant galvanized finish.Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern. If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt pattern is 5 on 5" If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
Filters
