This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 7,000 lb axle. Includes inner and outer bearings and races, double-lip grease seal, cotter pin, and EZ lube spindle washer. Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D. Seal O.D. 14125A 14276 25580 25520 GS-2125DL 2.125" 3.376" This replacement bearing and race kit contains all components needed to replace the bearings on one hub of your 5,200 lb to 7,000 lb axle.
Features: Kit Includes: One Inner Bearing and Race One Outer Bearing and Race Grease Seal Cotter Pin EZ Lube spindle washer Outer Bearing Inner Bearing Seal Seal I.D. Outer race Inner race 15123 25580 GS-2125DL 2.125" 15245 25520
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 6,000 lb trailer axle. Includes inner and outer bearings and races, seal, cotter pin, and washer for EZ lube spindle. Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D. Seal O.D. LM67048 LM67010 25580 25520 GS-2125DL 2.125" 3.376" This replacement bearing and race kit contains all components needed to replace the bearings on one hub of your 5,200 lb to 6,000 lb axle.
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 7,000 lb trailer axle. Includes inner and outer bearings and races, seal, cotter pin, and washer for EZ lube spindle.
Replace your hubs with these rust-resistant hub-rotor assemblies to get safer, more consistent braking. Durable Maxx coating and stainless parts make this kit perfect for occasional salt exposure. Includes inner (25580) and outer (15123) bearings.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Excellent for occasional use in saltwater or areas with a lot of snow, slush, and road salt Corrosion-resistant Maxx coat finish on hub-rotors and brackets has a salt spray rating over 1,000 hours Stainless steel calipers are rustproof Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes assemblies needed to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 6,000 lbs Wheel size: 15" and larger Bolt pattern: 6 on 5-1/2" Rotor diameter: 12" Piston diameter: 2-1/4" Brake flange configuration: 5 bolt Wheel bolt diameter: 1/2" 7-Year warranty Bearing, Race, and Seal Information: Bearings Inner bearing: 25580 Outer bearing: 15123 Races Inner race: 25520 Outer race: 15245 Grease seal: GS-2125DL Complete Kit Contents: 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Stainless steel calipers 2 Maxx coat mounting brackets 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 Zinc-coated grease caps (12) 1/2" Wheel bolts (12) 1/2" Zinc lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
This grease seal matches the following common seal numbers: Brand Part Number Chicago Rawhide/SKF 21352 Dexter 010-010-00, 10-10 Lippert -- National/Timken 440972 TruRyde GS-2125DL Transcom 21333VB
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic drum brakes. Fits 7,000-lb axles. Inner bearing (25580), outer bearing (14125A), races, 2.125" diameter oil seal, and oil cap included.Features: Trailer hub-and-drum assembly provides surface area for break shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Cast iron construction provides strength and durability Bearings, races, oil seal, oil cap, wheel bolts, and lug nuts included Hub and drum are made in the USA Specs: Application 7,000-lb axles Drum dimensions: 12" diameter x 2" wide: Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" 5-Year limited warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Oil seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376"
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Pre-greased hub is easy to install - no need to pack bearings Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb and 6,000-lb E-Z Lube trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Grease cap flange diameter: 2.44" Wheel bolt diameter: 1/2" Weight capacity: 3,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" E-Z Lube-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with spindles that require a 2-1/8" grease seal. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb trailer axles that require 2-1/8" inner diameter grease seal Also fits spindles that take a 2-1/4" inner diameter grease seal - requires RG06-070 (sold separately) Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Wheel stud diameter: 1/2" Grease cap flange diameter: 2.44" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376"
Hub-and-drum assembly fits 5,200-lb to 7,000-lb E-Z Lube axles with spindles that require a 2-1/8" grease seal. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb E-Z Lube trailer axles that require 2-1/8" inner diameter grease seal Also fits spindles that take a 2-1/4" inner diameter grease seal - requires RG06-070 (sold separately) Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Wheel stud diameter: 1/2" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" E-Z Lube-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 5,200 lbs Hub-face-to-hub-face length: 89" Spring-center-to-spring-center length: 74" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.44" Wheel stud diameter: 1/2" Wheel size: 14-1/2" - 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: LM67048 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: LM67010 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 6,000 lbs Hub-face-to-hub-face length: 95" Spring-center-to-spring-center length: 80" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.44" Wheel stud diameter: 1/2" Wheel size: 14-1/2" - 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Trailer axle measures 86-1/2" from hub face to hub face, 71-1/2" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 6,000 lbs Hub-face-to-hub-face length: 86-1/2" Spring-center-to-spring-center length: 71-1/2" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.44" Wheel stud diameter: 1/2" Wheel size: 14-1/2" - 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires Best for straight-line acceleration and steady, controlled towing Underslung design - spring seats welded to underside of axle for mounting leaf springs Low ride height makes it easier to load and unload your trailer Straight, E-Z Lube spindles - no drop Built-in grease zerks for simple lubrication Spring seats and spindles are welded on Electric brakes are easy to install - no actuator or hydraulic lines necessary Adjuster plugs, mounting bolts, and hardware included Cast iron hubs and drums are sturdy and durable Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included Made in the USA Specs: Weight capacity: 6,000 lbs Hub-face-to-hub-face length: 89" Spring-center-to-spring-center length: 74" Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Brake flange configuration: 5 bolt Axle tubing outer diameter: 3" Grease cap outer diameter: 2.44" Wheel stud diameter: 1/2" Wheel size: 14-1/2" - 16" Limited 5-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376" Axle Dimensions There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Hub is designed for use on trailer idler axles. Fits 5,200-lb to 7,000-lb axles with spindles that require a 2-1/8" ID grease seal. Inner bearing (25580) and race, outer bearing (14125A) and race, seal, cap, wheel bolts, and lug nuts included.Features: Trailer hub assembly fits idler axles Bearings, races, seal, grease cap, wheel bolts, and lug nuts are included Sturdy iron construction Zinc-enriched paint finish Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb trailer axles with spindles that require a 2-1/8" ID grease seal Also fits spindles that take a 2-1/4" inner diameter grease seal - requires RG06-070 (sold separately) Wheel size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel stud diameter: 1/2" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2125DL Inner diameter: 2.125" Outer diameter: 3.376"
Galvanized assembly is great for marine use. Fits 5,200-lb, 6,000-lb, and 7,000-lb axles with drum brakes. Inner and outer races included. Bearings, grease seal, grease cap, and lug nuts sold separately.Features: Marine-grade hub-and-drum assembly fits axles with drum brakes Includes inner and outer races Requires bearings, grease seal, grease cap, and lug nuts (sold separately) Zinc plating has a 500-hour salt spray rating Ideal for use on a boat or snowmobile trailer Durable enough for saltwater applications Specs: Application: 5,200-lb, 6,000-lb, and 7,000-lb axles Drum dimensions: 12" diameter x 2" wide Works with 12" x 2" electric and hydraulic brake assemblies Bolt pattern: 8 on 6-1/2" Wheel studs: 1/2" diameter x 2-11/16" long Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (sold separately) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (sold separately): GS-2250DL or GS-2125DL Corrosion Resistance for Marine Use This trailer hub-and-drum assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer.
Hard stops and heavy loads reveal worn hubs. This ABS-ready Lippert hub and drum comes prepacked with bearings, races, seal, and wheel bolts, saving you time on install and restoring smooth braking and steadier towing you can count on.Specs: Application & Capacity Axle rating: 5,200 lbs, and 6,000 lbs Spindle compatibility: #42 Brake type: compatible with electric ABS brakes Drum size: 12-15/16" diameter x 2-3/8" wide Weight capacity per hub: 3,000 lbs Quantity: 1 assembly Bolt Pattern Pattern: 6 on 5-1/2" Wheel bolt diameter: 1/2" x 1-1/4" If you need help figuring out your bolt pattern, just scroll down for directions Included Components Bearing: 15123 I.D: 1.250" Bearing: 25580 I.D: 1.75" Oil seal: GS-2125DL Bearing races: included and pre-installed Components Sold Separately Grease cap: K71-317-00 Lug nut: DE45KR Material Type Hub and drum: iron
Tandem-axle trailers put a lot of demand on your brakes, especially when you're hauling heavy equipment at highway speeds. This DeeMaxx kit replaces drum brakes with hydraulic disc brakes for more consistent stopping power during long tows.Specs: Brake Assemblies: Axle capacity: 6,000 lbs per axle Rotor diameter: 12" Bolt pattern: 6 on 5-1/2" Piston diameter: 2-1/4" Brake flange: 5 bolt Wheel bolt diameter: 1/2" Inner bearing: 25580 Outer bearing: 15123 Inner race: 25520 Outer race: 15245 Grease seal: GS-2125DL Actuator: Maximum output pressure: 1,600 psi Power: 12V DC, minimum 30 amp circuit Current draw: 18 - 24 amps at full pressure Hydraulic port: 3/16" inverted flare Fluid capacity: 15.7 oz, DOT 4 Dimensions: 10" long x 3-5/8" wide x 6" tall Brake Line Kit: Main line: 20' rubber brake hose Includes tandem-axle branch lines and fittings Hose inner diameter: 1/8" Fitting size: 3/16" Thread size: 3/8"-24 Thread length: 0.287" Brass tee and cross fittings included Warranty: Brake assemblies: 7-Year Actuator: 2-Year
Replace your hubs with these rust-resistant hub-rotor assemblies to get safer, more consistent braking. Maxx coating is even better than Dacromet, making this kit perfect for your boat trailer. Includes inner (25580) and outer (15123) bearings.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Great for towing and launching your boat in fresh or brackish water Corrosion-resistant Maxx coat finish on hub-rotors, calipers, and brackets has a salt spray rating over 1,000 hours Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes everything you need to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 6,000 lbs Wheel size: 15" and larger Bolt pattern: 6 on 5-1/2" Rotor diameter: 12" Piston diameter: 2-1/4" Brake flange configuration: 5 bolt Wheel bolt diameter: 1/2" 7-Year warranty Bearing, Race, and Seal Information: Bearings Inner bearing: 25580 Outer bearing: 15123 Races Inner race: 25520 Outer race: 15245 Grease seal: GS-2125DL Complete Kit Contents: 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Maxx coat calipers 2 Maxx coat mounting brackets 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 Zinc-coated grease caps (12) 1/2" Wheel bolts (12) 1/2" Zinc lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Triple-axle trailers put a lot of demand on your brakes, especially when you're hauling heavy equipment at highway speeds. This DeeMaxx kit replaces drum brakes with hydraulic disc brakes for more consistent stopping power during long tows.Specs: Brake Assemblies (Per Axle): Axle capacity: 6,000 lbs Rotor diameter: 12" Bolt pattern: 6 on 5-1/2" Piston diameter: 2-1/4" Brake flange configuration: 5 bolt Wheel bolt diameter: 1/2" Inner bearing: 25580 Outer bearing: 15123 Inner race: 25520 Outer race: 15245 Grease seal: GS-2125DL Electric Over Hydraulic Actuator: Application: Higher volume unit for long triple- or quad-axle trailers with disc brakes Maximum output pressure: 1,600 psi Overall dimensions: 16-7/16" long x 3-5/8" wide x 6" tall Mounting holes center-to-center: 16-7/8" long x 1-5/8" wide Power: 12 V DC, minimum 30 amp circuit Current draw at full pressure: 18-24 amps Hydraulic port size: 3/16" inverted flare Tank capacity: 28.7 oz, DOT 4 fluid Wiring configuration: Black: 12 V DC power Blue: Brake controller Yellow: Breakaway White: Ground Triple-Axle Brake Line Kit: Main line: 20' rubber brake hose (3) 6' 6" rubber brake lines (2) 3' rubber brake lines (3) 24" rubber brake lines Brass 3-way T-fitting and cross fittings included Hose inner diameter: 1/8" Fitting size: 3/16" Thread size: 3/8"-24 Thread length: 0.287" Brake line clamps, mounting screws, and zip ties included Required Components (Sold Separately): EOH-compatible brake controller Battery-powered breakaway kit 7-Way trailer connector Mounting hardware and wiring Warranty: Brake assemblies: 7-Year warranty Actuator: 2-Year warranty
Great for marine use, this hub can be used on idler axles or paired with a 12" disc brake rotor. Inner and outer races included. Inner bearing (25580), outer bearing (15123), grease seal, grease cap, and lug nuts sold separately.Features: Marine-grade trailer hub can be used on an idler axle or paired with a 12" slip-on rotor for disc brake applications Durable, corrosion-resistant galvanized steel construction Great for use on a boat or snowmobile trailer Wheel studs are long enough to accommodate an over-the-hub brake rotor or a custom wheel with a thick mounting face Races included Bearings, grease seal, and grease cap sold separately Specs: Application: 6,000-lb trailer axles with #42 spindles Bolt pattern: 6 on 5-1/2" Wheel stud dimensions: 1/2" diameter x 2-1/2" long Bolt size: 1/2"-20 Weight capacity: 3,000 lbs 3-Year limited warranty Bearing, Race, and Seal Information: Bearings (sold separately) Inner bearing: 25580 Outer bearing: 15123 Races (included) Inner race: 25520 Outer race: 15245 Grease seal (sold separately): GS-2125DL
Time and miles catch up with every trailer. When you get corrosion or damage at the hub you want a replacement that matches your spindle. This galvanized idler hub fits 6,000-lb #42 spindles used with threaded Vortex setups. Bearings sold separately.Specs Application: 6,000-lb Trailer axles with #42 spindles Bolt Pattern: 6 on 5-1/2" Wheel Stud and Bolt Specifications: Wheel stud dimensions: 1/2" diameter x 2-1/2" long Bolt size: 1/2"-20 Weight Capacity: 3,000 lbs per hub (6,000 lbs per axle) Components: Inner race: 25520 (pre-installed) Outer race: 15245 (pre-installed) Wheel studs (pre-installed) Inner bearing: 25580 (not included) Outer bearing: 15123 (not included) Seal (not included): GS-2125DL Oil cap (not included) Lug nuts (not included) Warranty: 3-Year limited
... Assembly comes with pre-installed inner (25580) and outer (15123) bearings, inner (25520) and outer (15245) races, and seal (GS-2125DL).Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Great for towing and launching your boat in fresh water Corrosion-resistant Maxx coat finish on hub-rotor, caliper, and bracket has a salt spray rating over 1,000 hours Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brake 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes 1 integral hub-rotor assembly with bearings, races, grease seal, grease cap, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required toactivate brakes Specs: Axle capacity: 6,000 lbs Bolt pattern: 6 on 5-1/2" Rotor diameter: 12" Piston diameter: 2-1/4" Brake flange configuration: 5 bolt Wheel bolt diameter: 1/2" 7-Year warranty Bearing, Race, and Seal Information: Bearings Inner bearing: 25580 Outer bearing: 15123 Races Inner race: 25520 Outer race: 15245 Grease seal: GS-2125DL Complete Assembly Contents: 1 Maxx coat, cast iron integral hub-rotor assembly 1 Maxx coat caliper 1 Maxx coat mounting bracket 1 Inner bearing 1 Outer bearing 1 Inner race 1 Outer race 1 Grease seal 1 Zinc-coated grease cap (6) 1/2" Wheel bolts (6) 1/2" Zinc lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Filters
