Replaces the hand winch on your Brophy cable camper jack (CJ31, CJ41, CJ74).Features: Replaces the hand winch on your Brophy cable camper jack (CJ31, CJ41, CJ74) Quantity: 1 hand winch Does not include cable
Swap out your rusty Shelby trailer jack with this one. Swing-up jack has a rust-resistant premium finish that's 6 times stronger than traditional zinc. 6" Caster swivels 360 degrees. Snap-ring-style mounting plate and hardware is included. winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. resistance Sturdy, square-tube design Ball mount, pin and clip sold separately Hitch assembled in the USA Specs: Receiver opening: 2" x 2" Rating: Class IV Maximum gross trailer weight : 12,000lbs
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Ball mount, pin and clip sold separately Hitch assembled in the USA Mounting hardware may be imported Specs: Receiver opening: 2" x 2" Rating: Class IV Maximum gross trailer weight : 12,000lbs
This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.: 2" x 2" Rating: Class V Maximum gross trailer weight : 12,000lbs Maximum GTW when used with weight distribution: 12,000lbs Maximum tongue weight : 1,200 lbs Maximum TW when used with weight
Pull the front-facing plunger pin on this jack to release the drop leg for 13-1/2" of lift on top of the 12-3/8" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows simple greasing. Sidewind crank included. installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000lbs Outer
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included. sidewind handle Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000lbs Total travel: 25-3/4" Screw travel : 12-1/4" Drop leg travel : 13-1/2" Overall height
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength. Built-in grease zerk allows effortless greasing. top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000lbs Support capacity: 15,000 lbs Outer tube
Replace the oil cap, O-ring, and plug for your Dexter or Valcrum axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil. Aluminum body with black coating is durable. seal Threaded cap installs easily Includes 1 cap, 1 watertight O-ring seal, and 1 plug Specs: Application: 10,000-lb to 15,000-lb axles Overall diameter: 4.0" 5-Year limited warranty
Replaces the oil cap, O-ring, and plug for your AL-KO or Rockwell axle. Fits 10,000-lb - 16,000 lb heavy-duty axles.Features: Replaces the oil cap, O-ring, and plug for your AL-KO or Rockwell axle Fits 10,000-lb - 16,000 lb heavy-duty axles Made in the USA Note: Direct replacement for Alko oil cap kit K568220
Clear polycarbonate cap screws into your 10,000-lb to 16,000-lb oil bath hubs. Allows for better retention and visual inspection of oil levels. Includes O-ring and plug for complete seal.Features: Clear polycarbonate cap screws into your 10,000-lb to 16,000-lb oil bath hubs Allows for better retention and visual inspection of oil levels Includes O-ring and plug for complete seal
Replace the oil cap, O-ring, and plug for your Dexter, Rockwell, Valcrum, or AL-KO axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil. Aluminum body with black coating is durable. coating protects your bearings O-ring and gasket provide a tight seal Threaded cap installs easily Includes 1 cap, 1 watertight O-ring seal, and 1 plug Specs: Application: 10,000-lb to 16,000-lb axles
Replace the oil cap, O-ring, and plug for your Dexter or Lippert axle. Black retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil. Aluminum body with black coating is durable. easily Includes 1 cap, 1 watertight O-ring seal, and 1 plug Specs: Application: 10,000-lb to 16,000-lb axles Overall diameter: 4.00" 5-Year limited warranty
Replaces the oil cap, O-ring, and plug for your Dexter axle. Fits 9,000-lb axles manufactured from 10/89 to 7/09, 10,000-lb axles manufactured prior to 7/09, and 12,000-lb and 15,000-lb heavy-duty ... Features: Replaces Dexter 21-36 oil cap Fits: 9,000-lb Axles manufactured from October 1989 to July 2009 10,000-lb Axles manufactured prior to July 2009 12,000-lb and 15,000-lb Heavy-duty axles
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 5" Assemblies have rust-resistant, e-coated backing plates and dust shields to protect from debris. Fits 15" or larger. Wheel size: 15" or larger Axle rating: 12,000lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 12-1/4" x 5" Assemblies fit 16" or larger wheels. Backing plate has a 7-bolt pattern. Made in the USA.; diameter x 5" wide Mounting flange bolt pattern: 7 bolt Wheel size: 16" or larger Axle rating: 12,000lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum
Replace the grease cap, O-ring, and plug on your Lippert hub. Magnetic vent plug removes damaging metal particles. Anodized aluminum alloy body dissipates heat and resists corrosion. Easy twist-on installation. magnetic vent plug Specs: Application: 9,000-lb to 16,000-lb Lippert axles Thread outer diameter: 4" 5-Year limited warranty
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Receiver sits beneath your bumper so it's out of the way when accessing cargo. Powder-coated steel is sturdy and corrosion resistant.Highlights Custom Fit for Your Vehicle: Mounts to existing attachment points for a seamless install. Heavy-Duty 2" Receiver: Tows up to 12,000lbs. Ideal for large boats, travel trailers, and
Filters
