Stay visible at dawn or dusk. This red LED clearance light mounts flush for a clean look, resists UV and impact, and stays reliable thanks to a hardwired setup that won't shake loose when the road gets rough.Specs Light Output: Function: clearance light or marker light Compliance: FMVSS P2 PC Lens color: clear Diode color: red LED type: single diode Construction: Housing and lens: polycarbonate Mounting type: grommet mount Connection: hardwired leads Dimensions: Outer diameter: 1-1/8" Overall height: 9/16" Electrical: Power draw: 0.08 amps Operating voltage: 12V DC Warranty: Lifetime LED warranty
8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer. 3-Wire pigtail.Features: Low-profile RV tail light serves 4 functions Stop, turn, and tail Built-in license plate light illuminates trailer license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable black ABS plastic base with snap-on lens Red and clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: driver side Passenger side: RVSTLB60 (sold separately) Light dimensions: 8-11/16" long x 3-3/16" wide x 2-1/8" deep Height with license plate bracket: 5" Diodes: 12 Power draw at 12.8V: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs
... Low-profile trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Durable plastic housing and acrylic lens. 12 LEDs. Stud mount. 3-Wire pigtail.The circuit board is sealed, which means that water will not damage the diodes or circuit board.
4-1/4" long x 1-3/4" wide x 1-1/4" thick. Compact LED light illuminates the area at the base of steps or ramps. Durable polycarbonate housing. Surface mount. 2-Wire design. Perfect for buses, RVs, enclosed trailers, or boats.Features: Light is perfect for the steps or ramp of your RV, enclosed trailer, bus, or boat Included energy-efficient, white LED bulbs last longer and burn brighter than incandescent bulbs Durable polycarbonate housing and clear lens with polished chrome finish Surface mount to trailer - hardware not included Included gasket creates a weathertight seal 2-Wire pigtail - includes power lead and ground wire Meets ADA lighting standard Specs: Dimensions: 4-1/4" long x 1-3/4" wide x 1-1/4" thick Distance between mounting holes (center on center): 3-2/3" Voltage: 12/24V DC Diodes: 10 Power draw at 12.8V: 0.107 amps Input voltage: 8V-30V Lifetime warranty on LEDs
5-1/2" Round. Waterproof trailer light serves 4 functions: brake, tail, turn, and back-up light. Built-in reflex reflector. Surface mount - hardware not included. 3-Wire design.Features: Combination trailer tail light serves 4 functions on trailers over 80" wide Stop, turn, tail, and back-up Built-in reflex reflector removes the need for a separate reflector Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear and red lens over white LEDs Compatible with 12V DC systems Surface mount with built-in flange - hardware not included 3-Wire design with 8" leads hardwires to trailer FMVSS complaint for trailers over 80" wide Specs: Overall dimensions: 5-1/2" diameter x 13/16" deep Diodes: 12 Power draw at 12.8V: Stop/turn: 0.375 amps Tail: 0.145 amps Back-up: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4" x 1" Rectangle. Waterproof, LED trailer light serves as either a side marker light or a clearance when properly mounted. Durable polycarbonate lens and housing. Surface mount on trailer - hardware not included. 2-Wire design. P2 rated.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
2-3/4" x 1-3/8" Rectangle. Mini LED trailer light illuminates your license plate. Durable ABS housing protects light against road debris. Surface mount with foam gasket - hardware included. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate Surface-mounted diodes (SMD) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable black ABS housing protects light against road debris and corrosion Clear lens over white LEDs Compatible with 12V and 24V DC systems Surface mount with foam gasket - hardware included 2-Wire design includes power lead and ground wire DOT approved when properly mounted Requires single light mounted at trailer center, or 2 lights mounted on each side Specs: Overall dimensions: 2-3/4" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 2" Diodes: 2 Power draw at: 12.8V: 0.139 amps 24V: 0.027 amps Lifetime warranty on LEDs
4" x 1" Rectangle. Waterproof, LED trailer light serves as either a side marker light or a clearance when properly mounted. Durable polycarbonate lens and housing. Surface mount on trailer - hardware not included. 2-Wire design. P2 rated.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
... Red lens set inside clear lens. Flush mount with built-in flange for a finished look. 14 Diodes.Features: Oval trailer tail light with smooth, bright red outer band serves 4 functions Stop light - outer band of light brightens and center LEDs illuminate Tail light - outer band lights up Turn signal light - inner oval of LEDs flashes Backup light - center LEDs light up Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Flush mount with built-in black flange - hardware not included Hardwired and ready to install DOT compliant Meets FMVSS 108 requirements for automotive lighting Specs: Wire configuration: Black: tail Red: stop/turn Brown: backup White: ground Overall dimensions: 7-1/2" long x 3-5/16" tall x 3/4" deep Wire length: 8-9/16" Mounting holes: 7" Apart on center (horizontal) 2-3/4" Apart on center (vertical) Diodes: 12 Voltage: 12V Lifetime warranty on LEDs
6-1/2" Oval. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights are installed. Smooth X-shape crosses the light face. Recessed mount with grommet (sold separately). Accepts 2-prong plug.Features: Oval backup light for trailers and utility trucks Certified for backup light function in a 2-lamp system when a pair of lights are installed (second light sold separately) Light Guide Series features a smooth X-shape across the face of the light Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing White LEDs with clear lens Recessed mount with grommet (sold separately) Accepts 2-wire pigtail DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Dimensions: 6-1/2" long x 2-3/8" tall x 1-3/4" deep Number of diodes: 12 Power draw 12.8 volts: 0.381 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
5-5/16" x 3-7/16" Rectangle. Waterproof trailer light serves 3 functions: brake, tail, and turn signal light. Durable polycarbonate housing and acrylic lens. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.Features: Rectangular trailer tail light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and acrylic lens Red lens over white LEDs Recessed mount with grommet (A33GB - sold separately) Accepts industry standard PL-3 plug (A45PB - sold separately) DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Dimensions: 5-5/16" long x 3-7/16" tall x 1-15/16" deep Diodes: 12 Power draw at 12.8 volts: Stop/turn signal light: 0.405 amps Tail light: 0.038 amps Quantity: 1 Lifetime LED warranty Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Weathertight gasket included. Surface mount on 6-1/4" centers. 3-Wire design. 12-24 Volts. 31 Red LEDs with a red lens and reflector.Features: Red trailer light serves 3 functions Stop, tail, and turn signal light Long-lasting LEDs (light emitting diode) are great replacements for incandescent lights Multi-diode design optimizes light output No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power Designed for 12-volt or 24-volt systems Weathertight seal with mounting gasket (included) 3-Wire design - includes lead wires for power and ground wire DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Shape: round Dimensions: 7" diameter x 1-7/16" deep Diodes: 31 Power draw: Stop: 0.180 amps at 24 volts Tail: 0.086 amps at 24 volts Installation: surface mount on 6-1/4" centers Lifetime warranty on LEDs
7" Diameter round. Waterproof, LED trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. Surface mount - hardware not included. 2-Wire design.Features: Round backup light for transit vehicles Certified for backup light function when installed as a pair in a 2-lamp system (second light sold separately) High diode count creates a strong light pattern Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount - hardware not included Foam gasket creates a weathertight seal 2-Wire design includes power lead and ground wire DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Dimensions: 7" diameter x 1-7/16" deep Distance between mounting holes (center on center): 6-1/4" Diodes: 42 Power draw at 12.8V: 0.301 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail with bullet connectors. 12Diodes.Features: Oval trailer tail light serves 4 functions Stop light Tail light Turn signal light Backup light Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface of trailer with built-in black flange - hardware not included 4-Wire pigtail with bullet connectors for easy wiring DOT compliant Specs: Overall dimensions: 7-1/2" long x 3-5/16" tall x 3/4" deep Weight: 0.275 lbs Diodes: 12 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.09A Backup: 0.26A Connector type: 0.180 male bullets Lifetime LED warranty
6-1/2" x 2-1/4" Oval. LED trailer tail light functions as a stop, tail, and turn signal light. Pirhana series combines modern design with vibrant lighting. Mounts on surface of trailer - hardware not included. 3-Wire pigtail.Features: Oval trailer light serves 3 functions on trailers less than 80" wide Stop light Tail light Turn signal light Piranha series combines modern design with vibrant lighting for a unique look LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Compatible with 12V and 24V DC systems Mounts on surface of trailer - hardware not included Mounts in any 360-degree position 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal DOT compliant Meets FMVSS 108 requirements for automotive lighting Specs: Overall dimensions: 7-1/2" long x 3-1/4" tall x 7/8" deep Lens dimensions: 6-5/16" long x 2-1/4" tall x 7/8" deep Distance between mounting holes (center on center): 7" Diodes: 10 Input voltage: 9V - 32V DC LED limited lifetime warranty Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
... Low-profile LED utility light illuminates an area with white light. Great White series features ultra bright white diodes. Mounts on surface of trailer - hardware not included. 2-wire pigtail.Features: Low-profile utility light illuminates an area with bright white light Great White series features custom-cut optics and ultra-bright white diodes for increased light output LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable black plastic base with acrylic lens Clear lens over white LEDs Compatible with 12V and 24V DC systems Mounts to trailer surface - hardware not included Can also be recessed mounted 2-Wire pigtail includes power lead and ground wire Specs: Dimensions: 6-3/8" long x 1-1/16" wide x 5/8" thick Distance between mounting holes (center on center): 5-1/2" Diodes: 16 Limited lifetime warranty
6-1/2" x 2-5/16" Oval. Waterproof, LED trailer tail light provides stop, turn, and tail function. Miro-flex lens increases light output. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). 3-Wire design.Features: LED trailer light provides 3 functions Stop light Turn signal Tail light Miro-flex faceted lens provides increased light output with a contemporary appearance Sonically sealed, housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Recessed mount with grommet (A70GB - sold separately) Mounts in any 360-degree position Mounting bracket (BK70BB - sold separately) allows light to be surface mounted 3-Wire design hardwires to trailer DOT compliant Specs: Dimensions: 6-1/2" long x 2-5/16" tall x 1-3/4" thick Diodes: 12 Power draw at 12V: Stop/turn: 0.161 amps Tail: 0.009 amps Limited lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4" x 2-1/2" x 1-5/16". Compact LED light illuminates the area at the base of steps or ramps. Durable aluminum hosuing. Surface mount. 2-Wire design. ADA compliant. Perfect for buses, RVs, enclosed trailers, or boats.Features: Light is perfect for the steps or ramp of your RV, enclosed trailer, bus, or boat Included energy-efficient, white LED bulbs last longer and burn brighter than incandescent bulbs Clear lens with white LEDs Die-cast aluminum housing is rustproof White coating protects against corrosion and damage caused by UV rays Surface mount to trailer - hardware not included 2-Wire pigtail - includes power lead and ground wire Meets ADA lighting standard Specs: Dimensions: 4" tall x 2-1/2" wide x 1-5/16" deep Distance between mounting holes (center on center): 2-15/16" Voltage: 12/24V DC Diodes: 5 Power draw at 12.8V: 0.25 amps Lifetime warranty on LEDs
5-5/16" x 3-7/16" Rectangle LED trailer tail light functions as a stop, tail, and turn signal light. Sealed lens and housing meets IP67 ingress protection level. Recessed mount with grommet (not included). Connection accepts AMP plug.Features: Rectangular LED trailer light provides stop, turn, and tail functions LEDs make great replacements for incandescent lights More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Great for marine use - sealed lens and housing meets IP67 ingress protection level Red lens over red LEDs Industry-standard AMP receptacle integrated into rear housing Recessed mount with grommet (not included) Made in the USA Specs: Overall dimensions: 5-5/16" wide x 3-7/16" tall x 1-1/2" thick Diodes: 12 Operating range: 9V - 32V Limited lifetime warranty
5-5/16" x 3-7/16" Rectangle LED trailer tail light functions as a stop, tail, and turn signal light. Sealed lens and housing meets IP67 ingress protection level. Recessed mount with built-in flange. Connection accepts AMP plug (417-49).Features: Rectangular LED trailer light provides stop, turn, and tail functions LEDs make great replacements for incandescent lights More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Great for marine use - sealed lens and housing meets IP67 ingress protection level Red lens over red LEDs Industry-standard AMP receptacle integrated into rear housing 417-49 Wiring harness sold separately Recessed mount with black flange Made in the USA Specs: Overall dimensions: 6-1/8" wide x 4-3/16" tall x 1-1/2" thick Diodes: 12 Operating range: 9V - 32V Limited lifetime warranty
2" Diameter round. Waterproof, LED trailer light serves as either a side marker light or clearance light. Durable polycarbonate housing and lens. Recessed mount with grommet (not included). Accepts standard 2-prong plug. P2 rated.Features: LED trailer light functions as a clearance or side marker light when properly mounted Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Amber lens over white LEDs Compatible with 12V DC and 24V DC systems Recessed mount with grommet (A54GB - sold separately) Accepts industry standard, 2-prong plug (A46PB or A86PB - sold separately) DOT compliant P2 rated Specs: Dimensions: 2" diameter x 1" deep Diodes: 3 Power draw at 12.8V: 0.06 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
... Red lens set inside clear lens. Recessed grommet mount (rubber grommet sold separately). 14 Diodes.Features: Oval trailer tail light with smooth, bright red outer band serves 4 functions Stop light - outer band of 10 red LEDs brightens and flashes Tail light - outer band of 10 red LEDs brightens and flashes Turn signal light - outer band of 10 red LEDs light up Backup light - center 10 white LEDs light up Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Recessed grommet mount (hardware not included, grommet sold separately) Hardwired and ready to install DOT compliant Meets FMVSS 108 requirements for automotive lighting Specs: Wire configuration: Black wire: tail Red wire: stop/turn Brown wire: backup White wire: ground Overall dimensions: 6-7/16" long x 2-1/4" tall x 15/16" deep Wire length: 8-1/16" Diodes: 12 Voltage: 12V Lifetime warranty on LEDs
... Mounts on surface of trailer - hardware not included. 2-wire pigtail. 16 Diodes.Features: Low-profile utility light illuminates an area with bright blue light Great for marine applications LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable white plastic base with acrylic lens Clear lens over blue LEDs Compatible with 12V and 24V DC systems Mounts to trailer surface - hardware not included Can also be recessed mounted 2-Wire pigtail includes power lead and ground wire Specs: Dimensions: 6-3/8" long x 1-1/16" wide x 5/8" thick Distance between mounting holes (center on center): 5-1/2" Diodes: 16 Limited lifetime warranty
4-9/16" x 2-3/4" x 15/16" Rectangle. Multipurpose LED light illuminates the interior or exterior of your RV, camper, or trailer with bright LED light. Surface mount. 2-Wire design.Features: LED utility light illuminates the interior or exterior of your RV, camper, or trailer with bright white light LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lens Compatible with 12V DC systems Surface mount to trailer - mounting hardware not included 2-Wire application White: ground Black: positive Specs: Dimensions: 4-9/16" long x 2-3/4" tall x 15/16" deep Diodes: 12 Power draw: 0.54 to 0.66 amps Wire length: 8" Lumens: 800 Limited lifetime warranty
Filters
