Use integrated switch or wire to a light switch to turn this double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.Features: Double dome light is perfect underneath a kitchen cabinet or in a walkway in your RV Included energy-efficient, warm white LEDs last longer and burn brighter than incandescent bulbs Integrated toggle switch lets you turn the lights on and off Can also be wired to an interior light switch Frosted plastic lenses are less likely to shatter than glass lenses Textured pattern helps disperse bright light throughout your RV Durable, white polycarbonate plastic construction Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included 2-Wire design - white for ground and black for power Specs: Overall dimensions: 10-5/16" long x 4-3/16" wide x 1-13/16" deep Mounting hole diameter: 3/16" Voltage: 12V DC Power draw at 12.8V: 0.6 amps Light output: Raw lumens: 920 lumens Effective lumens: 815 lumens Color temperature: 3,150 Kelvin Number of LEDs: 18 Lifetime warranty on LEDs Need extra light over your camper kitchen sink for when you do the dishes? Or perhaps you need to upgrade the dim, old lights in your enclosed car hauler?
Use integrated switch or wire to a light switch to turn this single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.Features: Single dome light is perfect underneath a kitchen cabinet or above a shower in your RV Included energy-efficient, warm white LEDs last longer and burn brighter than incandescent bulbs Integrated toggle switch lets you turn the light on and off Can also be wired to an interior, dimmable light switch Clear plastic lens is less likely to shatter than a glass lens Textured pattern helps disperse bright light throughout your RV Durable, white polycarbonate plastic construction Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included 2-Wire design - white for ground and black for power Specs: Overall dimensions: 6-3/8" long x 4-3/16" wide x 1-13/16" deep Mounting hole spacing (center to center): Up and down: 2-3/4" Side by side: 2-9/16" Voltage: 12V DC Power draw at 12.8V: 0.3 amps Light output: Raw lumens: 460 lumens Effective lumens: 407 lumens Color temperature: 3,150 Kelvin Number of LEDs: 9 Lifetime warranty on LEDs Need extra light over your camper kitchen sink for when you do the dishes? Or perhaps you need to upgrade the dim, old lights in your enclosed car hauler?
The thick channel plates and welded gusset on this solid steel ball mount make it perfect for heavy-duty use. Tow up to 12K with the 2" ball or 22K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.Features: 2-Ball mount lets you hook up your trailer to your tow vehicle Shank slides into 2-1/2" hitch receiver on vehicle Hitch ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Hitch ball platform slides up or down channel and secures in place with included pins and clips 6 Mounting positions available Heavy-duty steel construction 5/16" Thick channel frame is strong and durable 1/2" Thick welded gusset plate braces shank and channel Hitch balls are welded to ball platform for extra sturdiness 2 Different-size hitch balls let you tow trailers with different coupler sizes Switch balls easily - just remove pins, flip ball platform, and reinsert pins Matte black powder coat finish resists corrosion 2 Corrosion-resistant ppins and clips are included Heat-treated steel construction withstands heavy weights Nickel undercoat with zinc topcoat resists corrosion and ensures strength Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Ideal for vehicles with 25" - 27" clearance from ground to bottom of inside of receiver tube Maximum drop: 11-1/4" Maximum rise: 11" Gross towing weight: When used with 2" ball: 12,000 lbs When used with 2-5/16" ball: 22,000 lbs Maximum tongue weight capacity: 3,000 lbs Distance from hitch pin hole to hitch ball (center to center): Pin hole closest to channel: 11-3/4" Pin hole furthest from channel: 13-1/4" Overall height: 15-3/4" Total length with ball platform installed: 18-1/4" Total length without ball platform installed: 13-3/4" Distance from center of hitch pin hole to gusset plate: Pin hole closest to gusset plate: 3-1/2" Pin hole furthest from gusset plate: 5" Total weight: 52 lbs Pin hole diameter: 5/8" Adjustment hole diameter: 5/8" Limited lifetime warranty This adjustable ball mount has a maximum capacity of 22,000 lbs, making it ideal for heavy-duty towing.
Uneven tubes can leave scuffs and make loading stressful. This galvanized bracket lines up your 6' and 4' bunks so your pontoon settles square, cutting down on rub marks and standing strong against spray and saltwater.Specs Application Fits 6' long x 2" wide and 4' long x 2" wide bunks For 2x4 bunk boards; accommodates 2x6 boards Dimensions and Weight Overall dimensions: 15-11/16" long x 4-11/16" wide Weight: 2 lbs Material Material: 11-gauge galvanized steel Color: silver General Warranty: 1-year limited Made in the USA
The thick channel plates and welded gusset on this solid steel ball mount make it perfect for heavy-duty use. Tow up to 12K with the 2" ball or 22K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.Features: 2-Ball mount lets you hook up your trailer to your tow vehicle Shank slides into 2" hitch receiver on vehicle Hitch ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Hitch ball platform slides up or down channel and secures in place with included pins and clips 6 Mounting positions available Heavy-duty steel construction 5/16" Thick channel frame is strong and durable 1/2" Thick welded gusset plate braces shank and channel Hitch balls are welded to ball platform for extra sturdiness 2 Different-size hitch balls let you tow trailers with different coupler sizes Switch balls easily - just remove pins, flip ball platform, and reinsert pins Matte black powder coat finish resists corrosion 2 Corrosion-resistant ppins and clips are included Heat-treated steel construction withstands heavy weights Nickel undercoat with zinc topcoat resists corrosion and ensures strength Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Specs: Application: 2" x 2" trailer hitch receivers Ideal for vehicles with 25" - 27" clearance from ground to bottom of inside of receiver tube Maximum drop: 11-1/4" Maximum rise: 11-1/2" Gross towing weight: When used with 2" ball: 12,000 lbs When used with 2-5/16" ball: 22,000 lbs Maximum tongue weight capacity: 3,000 lbs Distance from hitch pin hole to hitch ball (center to center): Pin hole closest to channel: 11-3/4" Pin hole furthest from channel: 13-1/4" Overall height: 15-3/4" Total length with ball platform installed: 18-1/4" Total length without ball platform installed: 13-3/4" Distance from center of hitch pin hole to gusset plate: Pin hole closest to gusset plate: 3-1/2" Pin hole furthest from gusset plate: 5" Total weight: 45 lbs Pin hole diameter: 5/8" Adjustment hole diameter: 5/8" Limited lifetime warranty This adjustable ball mount has a maximum capacity of 22,000 lbs, making it ideal for heavy-duty towing.
The thick channel plates and welded gusset on this solid steel ball mount make it perfect for heavy-duty use. Tow up to 12K with the 2" ball or 36K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.Features: 2-Ball mount lets you hook up your trailer to your tow vehicle Shank slides into 2-1/2" hitch receiver on vehicle Hitch ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Hitch ball platform slides up or down channel and secures in place with included pins and clips 6 Mounting positions available Heavy-duty steel construction 5/16" Thick channel frame is strong and durable 1/2" Thick welded gusset plate braces shank and channel Hitch balls are welded to ball platform for extra sturdiness 2 Different-size hitch balls let you tow trailers with different coupler sizes Switch balls easily - just remove pins, flip ball platform, and reinsert pins Matte black powder coat finish resists corrosion 2 Corrosion-resistant ppins and clips are included Heat-treated steel construction withstands heavy weights Nickel undercoat with zinc topcoat resists corrosion and ensures strength Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Ideal for vehicles with 25" - 27" clearance from ground to bottom of inside of receiver tube Maximum drop: 11-1/4" Maximum rise: 11" Gross towing weight: When used with 2" ball: 12,000 lbs When used with 2-5/16" ball: 36,000 lbs Maximum tongue weight capacity: 6,000 lbs Distance from hitch pin hole to hitch ball (center to center): Pin hole closest to channel: 14-1/8" Pin hole furthest from channel: 15-5/8" Overall height: 15-3/4" Total length with ball platform installed: 20-1/2" Total length without ball platform installed: 16" Distance from center of hitch pin hole to gusset plate: Pin hole closest to gusset plate: 3-1/2" Pin hole furthest from gusset plate: 5" Total weight: 78 lbs Pin hole diameter: 5/8" Adjustment hole diameter: 5/8" Limited lifetime warranty This adjustable ball mount has a maximum capacity of 36,000 lbs, making it ideal for heavy-duty towing.
The thick channel plates and welded gusset on this solid steel ball mount make it perfect for heavy-duty use. Tow up to 12K with the 2" ball or 30K with the 2-5/16" ball. Adjustable design lets you tow trailers of various heights.Features: 2-Ball mount lets you hook up your trailer to your tow vehicle Shank slides into 2" hitch receiver on vehicle Hitch ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Hitch ball platform slides up or down channel and secures in place with included pins and clips 6 Mounting positions available Heavy-duty steel construction 5/16" Thick channel frame is strong and durable 1/2" Thick welded gusset plate braces shank and channel Hitch balls are welded to ball platform for extra sturdiness 2 Different-size hitch balls let you tow trailers with different coupler sizes Switch balls easily - just remove pins, flip ball platform, and reinsert pins Matte black powder coat finish resists corrosion 2 Corrosion-resistant ppins and clips are included Heat-treated steel construction withstands heavy weights Nickel undercoat with zinc topcoat resists corrosion and ensures strength Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Specs: Application: 2" x 2" trailer hitch receivers Ideal for vehicles with 25" - 27" clearance from ground to bottom of inside of receiver tube Maximum drop: 11-1/4" Maximum rise: 11-1/2" Gross towing weight: When used with 2" ball: 12,000 lbs When used with 2-5/16" ball: 30,000 lbs Maximum tongue weight capacity: 6,000 lbs Distance from hitch pin hole to hitch ball (center to center): Pin hole closest to channel: 13-7/8" Pin hole furthest from channel: 15-3/8" Overall height: 15-3/4" Total length with ball platform installed: 20-1/4" Total length without ball platform installed: 15-3/4" Distance from center of hitch pin hole to gusset plate: Pin hole closest to gusset plate: 3-1/2" Pin hole furthest from gusset plate: 5" Total weight: 62 lbs Pin hole diameter: 5/8" Adjustment hole diameter: 5/8" Limited lifetime warranty This adjustable ball mount has a maximum capacity of 30,000 lbs, making it ideal for heavy-duty towing.
Ideal for the rough rigors of off-road towing or overlanding, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form an extra-strong connection that is safe and secure, no matter the terrain.Features: Vehicle-side hitch links with Lock 'N' Roll trailer-side coupler (sold separately) to hook up your trailer to your tow vehicle Shank inserts into your vehicle's trailer hitch receiver Head unit provides attachment point for trailer-side coupler More secure connection than a traditional ball coupler Vehicle-side latching plates interlock with trailer-side coupler to form strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Bearing in head unit allows for 360 degrees of rotation Full articulation when paired with trailer-end coupler - setup pivots side to side and up and down Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Attachment hardware included for securing latching plates Steel alloy construction is strong and durable Black paint finish resists corrosion Meets SAE J684 towing safety regulations Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Latching pin dimensions: Pin diameter: 1/2" Usable length: 4-3/4" Hitch pin hole diameter: 5/8" Limited lifetime warranty This hitch combines with a Lock 'N' Roll trailer-end coupler (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
16" x 1-5/16" x 11/16". Low-profile LED trailer tail light serves as a stop, turn, and tail light for trailers over 80" wide. Surface mount - hardware not included. 3-Wire design.Features: Low-profile trailer tail light serves 3 functions on trailers over 80" wide Stop Turn Tail Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens over red LEDs Compatible with 12V DC systems Surface mount on trailer - hardware not included 3-Wire design hardwires to trailer FMVSS complaint for trailers over 80" wide Specs: Overall dimensions: 16" long x 1-5/16" tall x 11/16" deep Distance between mounting holes (center on center): 14-1/2" Diodes: 11 Power draw at 12.8V: 0.012 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
5-1/16" x 4-9/16" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. Durable plastic housing. Stud mount on 2" centers. 3-Wire design.Features: Square trailer light serves 6 functions Stop light, turn signal light, tail light, rear reflex reflector, side marker light, and side reflex reflector Built-in reflex reflector removes the need for a separate reflector Sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing and durable acrylic lens Red lens over white LEDs Stud mount with included hardware 3-Wire pigtail White wire is the ground Brown wire is for the tail lights Yellow wire is for the stop and turn lights Specs: Configuration: passenger's side Driver's side: STL9RB (sold separately) Dimensions: 5-1/16" wide x 4-9/16" tall x 2-5/8" deep Light face: 4-9/16" wide x 4-9/16" tall Distance between mounting studs (center on center): 2" Diodes: 11 Power draw at 12.8V: Stop light: 0.259 amps Side marker light: 0.062 amps Lifetime warranty on LEDS Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Ideal for the rigors of off-road towing, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form a strong connection that is safe and secure, no matter the terrain. 3-Position adjustment channel included.Features: Channel-mount hitch links with Lock 'N' Roll trailer-side coupler (sold separately) to hook up your trailer to your tow vehicle Shank of channel bracket slides into hitch receiver Hitch bolts into bracket Head unit provides attachment point for trailer-side coupler More secure connection than a traditional ball coupler Vehicle-side latching plates interlock with trailer-side coupler to form strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Bearing in head unit allows for 360 degrees of rotation Full articulation when paired with trailer-end coupler - setup pivots side to side and up and down Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Channel bracket lets you adjust the hitch's height to match different trailers Raise or lower hitch and bolt into channel to change height Grade 5 mounting bolts and locknuts included Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Attachment hardware included for securing latching plates Steel alloy construction is strong and durable Black paint finish resists corrosion Meets SAE J684 towing safety regulations Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Channel dimensions: 7-1/2" tall x 3-1/16" wide x 2-1/4" deep Hole spacing: 2" center to center Mounting bolt dimensions: 5/8" diameter x 5" long Center of hitch pin hole to center of adjustment holes: 8-3/8" Maximum drop: 4-1/4" Maximum rise: 4-1/4" Hitch pin hole diameter: 5/8" Latching pin dimensions: Pin diameter: 1/2" Usable length: 4-3/4" Limited lifetime warranty This hitch combines with a Lock 'N' Roll trailer-end coupler (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
Switch easily between trailers with this adjustable, solid steel ball mount. Go from a 10" drop to an 11" rise. Tow up to 12,000 lbs with either the 2" or 2-5/16" ball. Forged steel shank is powder coated for corrosion resistance.Features: Ball mount with included hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount platform up or down shank and secure in place with included pins 2 Different-size hitch balls let you tow trailers with different coupler sizes Just flip ball platform and secure with pins Solid forged steel shank offers exceptional strength and commercial-grade towing capacity Durable, glossy finish resists rust and corrosion Hitch pin and clip or hitch lock (FA86-00-4200) sold separately Specs: Application: 2" x 2" trailer hitch receivers Ball diameters: 2" and 2-5/16" Gross towing weight: 2" Ball: 8,000 lbs 2-5/16" Ball: 12,000 lbs Tongue weight: 1,200 lbs Maximum rise: 11" Maximum drop: 10" 1-Year limited warranty This Fastway Flash Strong Series ball mount offers exceptional durability and strength while maintaining a high-quality appearance.
Here's your versatile solution for safe towing! This aluminum hitch has a built-in gauge for measuring tongue weight, comes with two stainless steel tow balls that swap out easily, and includes locking pins to keep everything securely attached.Features: Ball mount with included hitch ball lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Tongue weight scale built into the ball mount platform helps you balance your trailer Safety first - a quick way to check if your load needs any adjustments before hitting the road Super simple to use - just couple your trailer and you'll get an automatic measurement every time No more messing around with separate scales - it makes everything so much easier Stowable design lets you store the balls and mounting platform underneath your vehicle Remove locking dual pins holding ball mount platform in place on shank Place platform on backside of shank, facing towards the vehicle Reinsert locking dual pins to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount platform up or down shank and secure in place with included locking dual pins 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove the slider and pull out the ball retaining pin to release the tow ball, drop the new one in, and reinsert pin Locking pin set deters theft and is keyed alike Hitch receiver lock secures ball mount shank to hitch receiver Locking dual pins secure platform securely to shank 4 Keys included Solid block construction is strong while staying lightweight Shank and mounting platform are made from tough 6061 T6 billet aluminum Stainless steel hitch balls are corrosion resistant SAE J684 certified and VESC Regulations V-5 compliant Specs: Application: 2" x 2" trailer hitch receivers Gross towing weight: 2-5/16" Ball: 12,500 lbs 2" Ball: 10,000 lbs Maximum tongue weight: 1,500 lbs Distance from center of hitch pin hole to center of hitch ball: Hitch pin hole closest to ball: 8-1/2" Hitch pin hole farthest from ball: 9-5/8" Maximum drop: 10" Maximum rise: 11" Incremental height adjustment: 1" Limited lifetime warranty Effortless Tongue Weight Management Remember when gauging your trailer's tongue weight was such a hassle?
Ideal for the rough rigors of off-road towing or overlanding, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form an extra-strong connection that is safe and secure, no matter the terrain.Features: Vehicle-side hitch links with Lock 'N' Roll trailer-side coupler (sold separately) to hook up your trailer to your tow vehicle Shank inserts into your vehicle's trailer hitch receiver Head unit provides attachment point for trailer-side coupler More secure connection than a traditional ball coupler Vehicle-side latching plates interlock with trailer-side coupler to form strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Bearing in head unit allows for 360 degrees of rotation Full articulation when paired with trailer-end coupler - setup pivots side to side and up and down Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Built-in drop or rise lets you match height between vehicle end and trailer end Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Attachment hardware included for securing latching plates Steel alloy construction is strong and durable Black paint finish resists corrosion Meets SAE J684 towing safety regulations Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Maximum drop: 4-1/2" Maximum rise: 4-1/2" Latching pin dimensions: Pin diameter: 1/2" Usable length: 4-3/4" Hitch pin hole diameter: 5/8" Limited lifetime warranty This hitch combines with a Lock 'N' Roll trailer-end coupler (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
Ideal for the rough rigors of off-road towing or overlanding, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form an extra-strong connection that is safe and secure, no matter the terrain.Features: Vehicle-side hitch links with Lock 'N' Roll trailer-side coupler (sold separately) to hook up your trailer to your tow vehicle Shank inserts into your vehicle's trailer hitch receiver Head unit provides attachment point for trailer-side coupler More secure connection than a traditional ball coupler Vehicle-side latching plates interlock with trailer-side coupler to form strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Bearing in head unit allows for 360 degrees of rotation Full articulation when paired with trailer-end coupler - setup pivots side to side and up and down Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Built-in drop or rise lets you match height between vehicle end and trailer end Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Attachment hardware included for securing latching plates Steel alloy construction is strong and durable Black paint finish resists corrosion Meets SAE J684 towing safety regulations Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Maximum drop: 2-1/2" Maximum rise: 2-1/2" Latching pin dimensions: Pin diameter: 1/2" Usable length: 4-3/4" Hitch pin hole diameter: 5/8" Limited lifetime warranty This hitch combines with a Lock 'N' Roll trailer-end coupler (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
With its black Cerakote finish, rocks and road debris can't chip or ding this hitch, so rust doesn't stand a chance. Plus, it comes with a stainless steel double-sided tow ball, so switching sizes is a breeze. Flip it around to stow it.Features: Ball mount with included hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Stowable design lets you store the balls and mounting platform underneath your vehicle Remove dual pins holding ball mount platform in place on shank Place platform on backside of shank, facing towards the vehicle Reinsert dual pins to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount platform up or down shank and secure in place with included locking dual pins 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, flip ball platform, and reinsert pins Locking pin set deters theft and is keyed alike Hitch receiver lock secures ball mount shank to hitch receiver Locking dual pins secure platform securely to shank 4 Keys included Black Cerakote-coated solid block construction is strong yet lightweight Shank and mounting platform are made from aircraft-grade 6061-T6 billet aluminum Cerakote coating enhances resistance to wear, chemicals, and corrosion Stainless steel hitch balls are corrosion resistant SAE J684 certified and VESC Regulations V-5 compliant Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: 2-5/16" Ball: 18,500 lbs 2" Ball: 8,000 lbs Maximum tongue weight: 2,200 lbs Distance from center of hitch pin hole to center of hitch ball: Hitch pin hole closest to ball: 8-1/2" Hitch pin hole farthest from ball: 9-5/8" Maximum drop: 10" Maximum rise: 11" Incremental height adjustment: 1" Limited lifetime warranty Easily Adjusts to Fit Your Setup Towing trailers with different coupler sizes just got easier thanks to the 180 Hitch 2-ball mount.
15" x 1-3/8". Low-profile LED tail light serves 3 funtions on trailers over 80" wide. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.Features: LED tail light serves 3 functions on trailers more than 80" wide Stop, turn and tail light Thinline Series has a low-profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over red LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 3-Wire design hardwires to trailer DOT compliant Specs: Dimensions: 15" Long x 1-3/8" tall x 5/8" deep Distance between mounting holes (center on center): 14-1/8" Diodes: 11 Power draw at 12.8V Stop/turn signal: 0.35 amps Tail light: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
17" x 1-3/8" x 1". Waterproof LED combination trailer tail light acts as a brake, tail, and turn signal when properly mounted. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.Features: Low-profile LED trailer light serves 3 functions: Stop Turn Tail Sonically sealed, polycarbonate housing and lens are waterproof Durable surface-mount technolgy (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Surface mount - hardware not included 3-Wire design Specs: Overall dimensions: 17" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 16-1/8" Diodes: 11 Power draw at 12.8V: Stop/turn: 0.350 amps Tail: 0.022 amps Quantity: 1 light Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Rust-resistant assemblies let you install 2 bunk boards on your boat trailer. Swivel brackets enable bunks to tilt when loading a boat. Mounting slots allow for height adjustment. Dimpled surfaces keep brackets from sliding along the trailer frame.Features: Bolster-and-swivel bracket assemblies allow you to install 2 bunk boards on your boat trailer Dimpled bolster bracket surfaces help prevent the brackets from sliding along the trailer frame Mounting slots permit as much as 3-3/4" of height adjustment during installation Each bolster bracket installs vertically on your boat trailer's frame with a U-bolt (sold separately) Strong swivel brackets let you tilt the boards Helps you to fit the boat hull snugly onto trailer during the loading process Hardware is included for attaching the swivel brackets to the bolster brackets 11-Gauge, galvanized steel resists rust and corrosion Suitable for saltwater exposure Made in the USA Specs: Quantity: 4 bracket assemblies Overall height: 11" Dimensions of bolster bracket: 10" tall x 2-1/2" wide Mounting slot dimensions: 3-3/4" long x 1/2" wide Spacing between mounting slots: 1/2" Dimensions of swivel bracket: 3-1/2" long x 1-3/8" wide x 2" tall Flange mounting hole diameters: 3/8" Flange mounting hole spacing: 2-1/2" apart on center Bolster-and-swivel-bracket assemblies are typically mounted upright on a boat trailer's crossmembers.
Ideal for the rigors of off-road towing, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form a strong connection that is safe and secure, no matter the terrain. 5-Position adjustment channel included.Features: Channel-mount hitch links with Lock 'N' Roll trailer-side coupler (sold separately) to hook up your trailer to your tow vehicle Shank of channel bracket slides into hitch receiver Hitch bolts into bracket Head unit provides attachment point for trailer-side coupler More secure connection than a traditional ball coupler Vehicle-side latching plates interlock with trailer-side coupler to form strong connection No more worries about coupler popping off of ball Articulating design softens road shock and is great for off-roading Bearing in head unit allows for 360 degrees of rotation Full articulation when paired with trailer-end coupler - setup pivots side to side and up and down Tight, interlocked connection creates smoother, quieter ride than pintle hitch Close-fit connection reduces rattling noise and jerking motion Channel bracket lets you adjust the hitch's height to match different trailers Raise or lower hitch and bolt into channel to change height Grade 5 mounting bolts and locknuts included Fast, easy hookup and disconnect Wide range of motion makes it easy to connect, even at an angle Attachment hardware included for securing latching plates Steel alloy construction is strong and durable Black paint finish resists corrosion Meets SAE J684 towing safety regulations Hitch pin and clip or hitch lock sold separately Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Maximum gross trailer weight: 11,000 lbs Maximum tongue weight: 1,100 lbs Channel dimensions: 11-1/4" tall x 3-1/16" wide x 2-1/4" deep Hole spacing: 2" center to center Mounting bolt dimensions: 5/8" diameter x 5" long Center of hitch pin hole to center of adjustment holes: 8-1/4" Maximum drop: 8-1/4" Maximum rise: 8-1/4" Hitch pin hole diameter: 5/8" Latching pin dimensions: Pin diameter: 1/2" Usable length: 4-3/4" Limited lifetime warranty This hitch combines with a Lock 'N' Roll trailer-end coupler (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road.
With its black Cerakote finish, rocks and road debris can't chip or ding this hitch, so rust doesn't stand a chance. It has a built-in gauge for measuring tongue weight, 2 stainless steel tow balls, and locking pins for extra security.Features: Ball mount with included hitch ball lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Tongue weight scale built into the ball mount platform helps you balance your trailer Safety first - a quick way to check if your load needs any adjustments before hitting the road Super simple to use - just couple your trailer and you'll get an automatic measurement every time No more messing around with separate scales - it makes everything so much easier Stowable design lets you store the balls and mounting platform underneath your vehicle Remove locking dual pins holding ball mount platform in place on shank Place platform on backside of shank, facing towards the vehicle Reinsert locking dual pins to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount platform up or down shank and secure in place with included locking dual pins 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove the slider and pull out the ball retaining pin to release the tow ball, drop the new one in, and reinsert pin Locking pin set deters theft and is keyed alike Hitch receiver lock secures ball mount shank to hitch receiver Locking dual pins secure platform securely to shank 4 Keys included Black cerakote-coated solid block construction is strong yet lightweight Shank and mounting platform are made from tough 6061 T6 billet aluminum Cerakote coating enhances resistance to wear, chemicals, and corrosion Stainless steel hitch balls are corrosion resistant SAE J684 certified and VESC Regulations V-5 compliant Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: 2-5/16" Ball: 18,500 lbs 2" Ball: 8,000 lbs Maximum tongue weight: 2,200 lbs Distance from center of hitch pin hole to center of hitch ball: Hitch pin hole closest to ball: 8-1/2" Hitch pin hole farthest from ball: 9-5/8" Maximum drop: 10" Maximum rise: 11" Incremental height adjustment: 1" Limited lifetime warranty h2 class="ltext strong"> Effortless Tongue Weight Management Remember when gauging your trailer's tongue weight was such a hassle?
Here's your versatile solution for safe towing! This aluminum hitch has a built-in gauge for measuring tongue weight, comes with two stainless steel tow balls that swap out easily, and includes locking pins to keep everything securely attached.Features: Ball mount with included hitch ball lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Tongue weight scale built into the ball mount platform helps you balance your trailer Safety first - a quick way to check if your load needs any adjustments before hitting the road Super simple to use - just couple your trailer and you'll get an automatic measurement every time No more messing around with separate scales - it makes everything so much easier Stowable design lets you store the balls and mounting platform underneath your vehicle Remove locking dual pins holding ball mount platform in place on shank Place platform on backside of shank, facing towards the vehicle Reinsert locking dual pins to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount platform up or down shank and secure in place with included locking dual pins 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove the slider and pull out the ball retaining pin to release the tow ball, drop the new one in, and reinsert pin Locking pin set deters theft and is keyed alike Hitch receiver lock secures ball mount shank to hitch receiver Locking dual pins secure platform securely to shank 4 Keys included Solid block construction is strong while staying lightweight Shank and mounting platform are made from tough 6061 T6 billet aluminum Stainless steel hitch balls are corrosion resistant SAE J684 certified and VESC Regulations V-5 compliant Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: 2-5/16" Ball: 18,500 lbs 2" Ball: 10,000 lbs Maximum tongue weight: 2,000 lbs Distance from center of hitch pin hole to center of hitch ball: Hitch pin hole closest to ball: 8-1/2" Hitch pin hole farthest from ball: 9-5/8" Maximum drop: 10" Maximum rise: 11" Incremental height adjustment: 1" Limited lifetime warranty Effortless Tongue Weight Management Remember when gauging your trailer's tongue weight was such a hassle?
This hitch has a stainless steel double-sided tow ball, so switching sizes is a breeze. Tow up to 8,000 lbs with the 2" ball or up to 18,500 lbs with the 2-5/16" ball. Flip the platform out of the way when not in use and save your shins.Features: Ball mount with included hitch balls lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver Ball provides connection point for trailer coupler Stowable design lets you store the balls and mounting platform underneath your vehicle Remove dual pins holding ball mount platform in place on shank Place platform on backside of shank, facing towards the vehicle Reinsert dual pins to secure ball mount platform for travel Adjustable height lets you tow trailers of different heights with the same vehicle Slide ball mount platform up or down shank and secure in place with included locking dual pins 2 Different-size hitch balls let you tow trailers with different coupler sizes To switch ball, simply remove pins, flip ball platform, and reinsert pins Locking pin set deters theft and is keyed alike Hitch receiver lock secures ball mount shank to hitch receiver Locking dual pins secure platform securely to shank 4 Keys included Solid block construction is strong while staying lightweight Shank and mounting platform are made from tough 6061 T6 billet aluminum Stainless steel hitch balls are corrosion resistant SAE J684 certified and VESC Regulations V-5 compliant Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Gross towing weight: 2-5/16" Ball: 18,500 lbs 2" Ball: 8,000 lbs Maximum tongue weight: 2,200 lbs Distance from center of hitch pin hole to center of hitch ball: Pin hole closest to ball: 8-1/2" Pin hole farthest from ball: 9-5/8" Maximum drop: 10" Maximum rise: 11" Incremental height adjustment: 1" Limited lifetime warranty Easily Adjusts to Fit Your Setup Towing trailers with different coupler sizes just got easier thanks to the 180 Hitch 2-ball mount.
Marine equalizer with corrosion-resistant coating and Nylatron bushings for quiet, durable suspension on 1-3/4" double-eye spring marine trailers.Features: Designed for marine trailer suspension systems Corrosion-resistant marine-grade coating Tested to withstand 500+ hours of salt spray exposure Nylatron bushings reduce noise and wear Fits 1-3/4" double-eye leaf springs Built from high-strength materials for long-term durability Specs: Fits 1-3/4" wide, double-eye leaf springs with 9/16" spring eyes Center bolt hole diameter: 9/16" Dimensions: Distance between left and right bolt holes (center on center): 5-11/16" Distance between hanger bolt hole and side bolt hole (center on center): 2-7/8" Height of side bolt hole to hanger bolt hole: 2"
Filters
