Search: receiver parts   >   !Andersen  x   >   Thor  x   >  

the hitch out from under the rv. Will this part fit inside my receiver it looks to be the same size | I already have a 2-1/2inch receiver on my rv. What I really need is a 2-1/2inch extension to move the hitch...

Hitch Receiver part # 41990-07 or part # 41990-16 which can be bolted/welded to the trailer frame rails | Can a Class IV hitch be installed on my 2011 Thor Four Winds 23u motorhome? It currently...

Hello, I was hoping you can help me figure out what dual hitch receiver adapter I need | Hello, I was hoping you can help me figure out what dual hitch receiver adapter I need. The goal would be to have some sort of dual...

Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 10K, part # 325-GH-314. It is rated 10K | 2021 Thor Motorhome. Top of receiver is 22inch and the recommended height of the coupler is 14-16. I bought...

In regards to the Curt Trailer Hitch Receiver part # C14048, the distance from the center | What is the total length of curt hitch 14048 from the front bracket to the rear bracket, front mounting hole to end...

at is not designed for towing a trailer. Instead I recommend using a stacked receiver ball mount like the Gen-Y | Can I tow a 6 x12 aluminum trailer with a GVWR of 2900 lbs with a hitch attached to this? | I have a solution...

have some great options. I recommend the Curt Adjustable Trailer Hitch Receiver part # C13701 which | i have a 2015 Thor Motorhome. 34J. It is used to pull a double axle 20 ft. triler loaded with bicycles and...

this is the correct part? The rack has a 2inch receiver and pivots away from the hatch. See below pictures | I am trying to find a replacement arm for the following rack, but do not have a rack name or model...

the Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening part # RM-195225 which is designed | I have a 2020 Tron Four winds Class C RV. Can i use the Maxxtow Dual Hitch With the Curt Trailer...

- but is that correct for the Sprinter chassis? What controller and other parts do I need? - Is it better to go | I see posts about the brake controller connection being behind the coin holder - but is that correct for the...

That is a great question! The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening | Hello, Probably a dumb question, but I am looking at buying this item....product number 195225...the Roadmaster Spare Tire...

outlet in the towed vehicle that's receiving constant power then you'll want to install one like part | I have power to my even break , compressor does not pressure up, PV monitor said low battery , I cleaned...

Sirius receiver. Since I have an over the cab area and the body exiterior is fiberglass, what | I have a 2023 Thor Quantum WS-3 equipped with Sirius XM ready. i am ordering the required add-on Sirius receiver. Since I have...

be the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07 which is rated at 1,600 lbs tongue | I am trying find a solution to a hitch problem. I have an RV and the Class IV hitch on...

The Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Metallic Black, part # NV22B | I have a Turbo Como 5 E-Bike with Fenders Here is a link to exactly how it is equipped I am looking at the KUAT NV 2 bike rack Will...

Hello, In your installation video for the SMI CoachLink 900 Wireless Transmitter and Receiver | Hello, In your installation video for the SMI CoachLink 900 Wireless Transmitter and Receiver Braking Indicator Set # SM99945...

Thanks for the photos. The Ultra Fab motorcycle carrier part # UF48-979033 is not designed | Hello, I am replying to someone elses question. I bought the Ultra Fab RV carrier as did this customer. But my 2006 Honda Reflex NSS250...

and all electronics such as switches, receivers, etc must be mounted inside the rv near the power source | I am looking for an exterior LED light strip to install under the awning on my motorhome. Preferably 12 feet long, changeable...