Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
When rotating tires like the #AM10303 on your triple axle trailer I recommend using the X pattern. This means you will swap the front driver side tire with the back passenger side tire, the front passenger side tire with the back driver side tire,…
view full answer...Yes, we do have those kits. The kit 6212 that you referenced is part #SM99666 on our site. The kit 6237 that you referenced is a combination of parts #SM99226 and #SM99625 on our site.
view full answer...I have some great replacement RV door latch options. The only one we offer that would come close to fitting such a large cutout is the Bauer Products Camper Door Lock part #BA65FR which fits up to 5-1/4" wide x 4-1/2" tall openings so…
view full answer...I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when loading/unloading, but…
view full answer...The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…
view full answer...I had the Stallion ATV Ramps #288-07432-2 measured and the spaces are 2 3/4 by 4 3/4. I included a picture of how they were measured as well. The red is 4 3/4 inches and the blue is 2 3/4 inches.
view full answer...We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The included…
view full answer...I recommend the Aluminum Car Hauler Ramp Set - 60" x 14-1/2" - 6,000 lbs - Qty 2, part #288-07502, instead. It is rated up to 6,000 lbs. The ramps are 5' in length. The Loading Ramp Set - Aluminum - 65" Long x 20-1/2" Wide -…
view full answer...Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…
view full answer...We do have lift kits for trailers with Dexter Torflex Torsion Axles however, I don't have any information on what specific axles your trailer is equipped with so you will need to find out what axle is one your trailer either by calling the…
view full answer...What you have on your horse trailer is a pretty common clearance light that we do offer in red and amber as an LED. For the red you'd want the part #AL91RB and for amber part #AL91AB. You'll also need the grommet part #A91GB and the right…
view full answer...The number 5.30 on your tire is the section width of the tire which means the tire is 5.3 inches wide. For a comparable radial tire for your boat trailer you can use a tire like part #AM10130. This tire measures 5.7-inches wide. The #AM10130 tire is…
view full answer...Related Searches
Filter Your Search
Contact and Help