Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I would have to know exactly what jacks you have on your 2023 Jayco Greyhawk to determine if the Replacement Foot Pad #LC324269 will fit. This is specifically for the Lippert Hydraulic Ground Control Leveling System.
view full answer...Since you do not have a tow package on your 2020 Ford Transit T250 you'd need to first start with a 4-way trailer wiring connector with the part #118643 and then you'd need to use the part #ETBC7 to convert it to a 7-way and wire in a brake…
view full answer...I suggest using a strap wrench to hold the cylinder side while tightening the installation hardware on the Replacement Foot Pad, #LC324269.
view full answer...Since the trailer was off of the ground it would not take much voltage to stop the wheels from spinning so they may be getting power but they may not be getting enough power due to a short or wiring issue. But 9 times out of 10 weak trailer brakes…
view full answer...Brakes are designed to fit the hubs that fit the axles not the rims. So you want to stick with 3,500 pound, 10 inch brakes like the Dexter Nev-R-Adjust, part #23-468-469. Larger 12 inch brakes won't fit your hubs. It is more common to see 15 inch…
view full answer...Other than saying that the air bags need to be kept between 5 and 100 psi, Firestone does not offer much in the way of specifics. The instructions mention that as a general rule of thumb, 1 psi will support approximately 40 lbs of load. Your best bet…
view full answer...I attached a help article as well as a picture that shows info on the different hitch classes for you to check out. Basically it's a way to organize them by size and capacity starting with the lower capacity Class I hitches up to the Class V…
view full answer...Yes, the Tow Ready Mounting Harness #18144 will wok with the Curt T-connector Harness, #C55301. The mount can connect at the bumper of your vehicle to mount the 4-flat plug of the Curt harness.
view full answer...Yes, both the Curt Hitch #C13409 and Wiring #C56040 will fit great on your 2023 Subaru Forester Wilderness model. I also recommend picking up the Mounting Brackets #C42CR and #C57202 so your wiring connector is readily available next to your hitch…
view full answer...For your 2022 Subaru Forester you will first need a T-One Vehicle Wiring Harness #118467 to tie into the tail lights on your vehicle to provide the lighting for the 7-way. This will plug into the Universal Installation Kit for Trailer Brake…
view full answer...We've got all of the parts you're going to need, so don't worry! To start, you'll need to install a 4 way connector, since it provides the base of what you'll need for the 7 way which is used on your Aliner travel trailer. For…
view full answer...According to Redarc, when installing the Redarc Tow-Pro Liberty Brake Controller part #RED24FR on a 2020 Subaru Outback with AEB you'll want to splice into the stop light circuit at the rear of the vehicle through the tail light harness. If you…
view full answer...Related Searches
Filter Your Search
Contact and Help