Hey Kienan thanks for the picture. The only solution I have for you is the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector item #C59236. This is a universal wiring harness that uses clamps instead of splicing and cutting wires.…
Hi Nate; the Terran Axle Trailer Idler Hub Assembly #TX33VJ uses the standard 3,500 lb bearing combination and grease seal. It has a #L68149 inner and #L44649 outer bearing with a #58846 (10-19) grease seal. If you're looking for a replacement…
I have to go off the GM dealership recommendation. If they are saying you need the Hydrastar #HBA-CAM or Dexter #DX35FR adapter module for your factory brake controller to work with your electric over hydraulic brake actuator, then I can't really…
Yes, the Brake Buddy Stealth Supplemental Braking System, #HM39530 does require the installation of the brake controller to properly function. Please see the attached product review and installation videos.
Both the Brake Buddy Select 3 #HM39524 and Brake Buddy Classic 3 #HM39494 would be great choices for your 2022 Jeep Wrangler Sahara, but for the most customizable option you'll want the Select 3 #HM39524. The main difference between these two…
The Lippert High-Speed Power Stabilizer Jack 337199 can be used on either the front or rear of a travel trailer as a stabilizer jack. Often times people think it is only for use on a 5th wheel as for the longest times most travel trailers sat lower…
The weight of the Flash Solid Steel HD Adjustable 2-Ball Mount #FA49-00-5625 that you referenced is 37 lbs, and the weight of the Curt #C45902 is 36 lbs. So in that regard they are essentially the same. They really are quite a bit alike in most ways.…
Yes it will! The Rubber Bumper #C45921 is a direct replacement for the Curt Adjustable Ball Mount #C45900 but the only differences between the shank that comes with that system and the Replacement Shank #C45917 that you referenced is the weight…
The Curt Adjustable 2-Ball Mount #C45902 is manufactured overseas. If you are looking for a similar made in the USA adjustable ball mount the Flash Solid Steel HD Adjustable 2-Ball Mount #FA49-00-5625 has the same 2-1/2" receiver, 6" drop,…
Hello Dan, Definitely on the right road to a smoother ride (pun intended). I would say that you knowing you are on the heavier end of the tongue weight you are safe finding one around the 1k mark. You just want to make sure you are closer to the…
I have a possible solution for you, but Curt does not offer a silver two ball attachment for the Curt Adjustable Ball Mount #C45902. One possible solution for you is the Fastway E Series HD Adjustable 18K Ball Mount #FA42-00-2625. A nice feature…
Filters
