Search: SafetyStruts > Accessories and Parts >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Douglas! We have skid wheels that attach in various ways such as the #UF48-979021, #UF48-979017, or #UF48-979015. Is that what you're talking about? If not, you can reply to the email with the link for this page and send me your pictures and…
view full answer...The Kenda Karrier ST225/75R15 Radial Trailer Tire - Load Range E #AM10303 would work just fine to replace the Westlake ST235/75R15 tires currently on your trailer but will be about 1/2" narrower and shorter. The #AM10303 has a load rating of…
view full answer...The Curt MV Weight Distribution system part #C17062 that you referenced weighs 101 lbs.
view full answer...Hi Emily, Before buying anything you'll want to verify that both the Pilot and the trailer hitch installed on it are rated for use with a weight distribution hitch (WDH). From what I can see Honda does not recommend it because it can shift the…
view full answer...The spring bars of the Curt weight distribution system part #C69JR are right at 35 lbs which means the rest of the system weighs 60 lbs.
view full answer...The standoff tab on the Brophy Rigid Mount Spare Tire Carrier part #BR56VR is about 5" so as long as the width of the tire does not exceed 10" (0 offset wheel) you should be able to mount the wheel either way. If the width of the tire…
view full answer...Different manufacturers sometimes have different philosophies about the set-up process of a weight distribution system on a vehicle with factory air shocks. I can share with you the process we have found to work well for us when setting up a weight…
view full answer...Great question, Mike! The Brophy Rigid Mount Spare Tire Mount #BR56VR doesn't actually have a weight rating because it's been rated for tires that fit on up to 17-1/2" wheels. So this will be able to handle the weight of your 16"…
view full answer...Unfortunately Dean there is not a single vent cover used for your Greystone. You will need to compare your current vent and cutout to find the correct replacement vent from the list below. Ventline Exterior Wall Vent #V2111-55 (Cutout: 10-1/2" x…
view full answer...If the height of the I-beams is less than 6" as you say then you would have to have to swap out the regular safety struts for the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets #MO34VR, which include spacers to place the brackets…
view full answer...Hey Martin, we can definitely help with that. Your exact tire size is only available in an off-road style but the next closest size is the ST225/75R15 which we offer with the #TR225LRE. This would be just a tiny bit smaller than what you have now but…
view full answer...The distance between each of the mounting brackets of the 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR is 27-9/16 inches. The picture I attached came from the install instructions which are also linked on this page as well.
view full answer...