Recommended Ball Mount with Drop for Towing and Receiver for Other Accessory
Do they make one with a 4 inch drop. My xterra sits high and i normally use a 4 inch hitch for my popup | The Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210 does not come in any other drop. If you need...
Inside Dimensions of Bar Mount Assembly for Thule Hullavator Pro for Mounting on 2006 Nissan Xterra
good morning, I have an Xterra and need to mount a cross bar on my roof rack, that this part will fit over. I was thinking about buying unistrut 1 5/8inch x 7/8 and using U bolts to attach to my round bars. can you tell me the inside dimension?...
Will Advent AC Unit # ACDOM150 Replace Dometic Duo Therm Unit Easily
Is this a replacement for the Duo Therm? | Yes, the Advent AC unit part # ACDOM150 that you referenced will work great as a replacement for a Dometic Duo Therm unit like you have. We had a customer come back and tell us how well this worked...
Weight Distribution System Recommendation for Travel Trailer w/ 300-400 lb Tongue Weight
The video and specs say this is for a 800-1000 tongue weight trailer. Will it be ok with a cargo trailer with a weight around 300 to 400? We pull our 7x14 cargo Converted to a travel trailer and it has a tongue weight around 300-400. The Xterra...
Replacement Parts for Karrite Voyager Cargo Box
Hi, I bought a used Karrite Voyager carrier, but no roof attachments and no model number that I can find. I saw in one of your previous postings that I can use the replacement mounting hardware kit #TH04958 for the Thule Sidekick cargo box #...
Is There a Plug and Play Brake Controller Adapter Plug in a 2000 Nissan Xterra
Where is The trailer connection inside my Nissan 2000 Xterra to hook up the brake assist unit | It sounds like you're referring to the factory plug that's used for a brake controller adapter; it doesn't appear that the 2000 Nissan Xtrerra came...
Wheels/Hubs/Brake Assemblies to use with Timbren Axle Less TASR5200S05
Are the components in this cart compatible with each other. Product Detail Qty Total AKEBRK-6Electric Trailer Brake Kit - 12 - Left and Right Hand Assemblies - 5,200 lbs to 7,000 lbs - AKEBRK-6 Remove 1 Update TASR5200S05Timbren Axle-Less...
What is Amperage Rating of 12 Volt Charge Circuit of 2013 Nissan Xterra
I will be pulling a small camper with a big battery charged by the engine on my 2013 Nissan Xterra using a dc to dc charger. The question is, how many amps will the charge wire supply using this 7 way setup with relays? | To get an idea how...
Roof Cargo Basket Recommendation for a 2015 Nissan Xterra with Factory Crossbars
Will this basket fit the factory crossbars on my 2015 Nissan Xterra Pro4X? The crossbars are not adjustable stationary. | If your crossbarshave a spread between 20" and 37" apart, the Thule Canyon # TH859Xt would be a good choice. Thule doesn't...
Recommended Manual Trailer Dolly for Camper with 375 Lb Tongue Weight
I have a popup camper weighing 3000 lbs, with a tongue weight of 375. Need to manually maneuver this in my level concrete carport. I can move it with the double 6inch wheel but its difficult as it doesnt turn easily. Which manual unit will work?...
Troubleshooting Curt Venturer Brake Controller on 2008 Nissan Xterra with No Lights
Hi I tried to install this on my 08 xterra off road with factory tow package. When I plugged it in all I got was a flashing red light indicating a short. Now, since I plugged it in the first time none of the lights on my trailer work. Any ideas?...
Recommended Hubs For 22-AXC1 1800 lb Axle
Looking for a pre-greased hub that will fit on my 22-AXC1 axle. Bolt pattern doesnt matter. According to the specs, the spindle is 1 1/16. Thanks! | You have a galvanized 1200 lb axle that uses L44649 inner and outer bearings, typically used...
Mounting Brackets for 7-Way Wiring Kit 118266
I just recently purchased the #118266 plug and harness from etrailer for my 2012 nissan xterra and forgot about the mounting bracket. The page says this one will fit but I want to make sure the PK12711U-26 mounting bracket and hardware will...
Installing 7-Way Harness On 2012 Nissan Xterra
I recently purchased the brake controller and 7 pin wiring kit for my 2012 Xterra Pro. Not sure if I need to cut and splice wires on the harness power and brake but will know tonight when I hook up the controller. I cant find the link to the...
Recommended Timbren Suspension Enhancement for a Lifted 2008 Nissan Xterra
I have a 2008 Nissan Xterra with a 3 inch lift, it has 7 springs 650# weight . I am buying a 4000 # camper and would like to know if I could add sumo or timbrens to it. Would a regular set work for me or I do I need the measure the space from...
Why Can't Trailer Axles Just be Flipped
I have a jayco trailer that I would like to lower. The axle is under the leaf spring. Why do I need a kit to move it above the spring? Can I just flip the u bolts over when relocating the axle above the leaf spring? Thank you | This is a really...
How To Lift a Tent Trailer for More Ground Clearance
i like to raise 1.5 to 2inch clearance without changing the tires and wheels. How can i? its hitting my driveway. Thank you | In regards to raising a trailer, there will be a few options depending on the type of axle which mind you I cannot...
How to Carry Kayak & Cargo on 2015 Nissan Xterra
Hi, Im heading to Alaska, and Im trying to find a good roof storage bag or hard case and a single kayak mount option using the stock Xterra roof rack. Any suggestions? Thanks | Appreciate the photo of your 2015 Nissan Xterra (not to mention...
Hook Opening Size of SmartStraps Carbon-X Ratchet Tie-Down Straps # 348249
What is the opening of the hook of this tie down? | The hook opening dimension of the SmartStraps Carbon-X Ratchet Tie-Down Straps # 348249 that you referenced is 1-1/4 inch. I attached a review video for this for you to check out as well. |
SnowBear Plow For 2002 Nissan Xterra SE
How will this work on a 2002 Nisson Xterra SE? | The 5XM5 Universal Cross Member for SnowBear Snowplows part # SB324-060 would be needed on the 2002 Nissan Xterra if you already have a snow bear plow that does not have a cross member. It would...
What 4-Way to 7-Way Adapter Fits My 2010 Nissan Xterra?
I have a 4 plug trailer adapter on my Nissan Xterra and need to pull a 7 pin wired trailer. Do you have an adapter? | Yes! If you are planning to use a 7-wire trailer with your 4-way plug on your 2010 Nissan Xterra, you need the Adapter 4 Pole...
Recommended Crossbars for a 2007 Nissan Xterra Wanting to Use the Thule Hullavator Pro
I want to mount the hullivator on my 2007 nissan xterra. I Bought the Thule wingbar evo 135 53” bars based on the advice that was provided but they don’t seem to fit. They are too wide. Am I missing something or was that incorrect information?...
Replacement Hardware for a Curt Trailer Hitch
I have a 2012 Nissan Xterra. I have a Curt trailer hitch. I need the bolts for this. I could find the page on the website. | We have exactly what you need. You will want the Replacement Hardware Kit for Trailer Hitches item # RHK. This will...
Roof Mounted Cargo Box Recommendations for the 2005 Nissan Xterra with Factory Roof Rack
Hi. I am looking for a enclosed roof system for my husbands 205 xterra. He already had the tubular roof rack that comes on many of the xterras. We ski and snowboard...looking for some help in finding him the right one for a x-mas pesent. thanks...
Filter Your Search
Contact and Help