!Outback Wagon  x   >   Custom Install Kit  x   >   Optronics  x   >  

I tried your suggestion of how to remove the lens without tools and still cannot get it off! I even tried using some no-scoot material to help with my grip and that didnt work. What next? I dont want to break the lens but it has to come off!...

how do you ground a tow bar from the pickup to the trailer? | The trailer itself will have a ground wire from the trailer connector that needs to be attached to a clean and corrosion free bare metal surface on the trailer frame. The lights like...

can i get this item longer ? i need 12 long | We do carry a 12 inch long red reflector, part # RFL-12R. It is 12 inches long and 1 inch wide. You could also use 4 of the reflectors you were looking at and that would give you a total length of...

Im wiring a 2005 Focus ZX3 to pull a 5-wire trailer. My trailer has a separate directional bulb. I need to match a 5-wire round connector on the trailer. | There are two feasible options for getting your trailer connected to your Focus. The...

I basically have the same tail lights as what I see on the web site, dimension wise, 3 prong, three function light-brake-turn. The # on my trailer lights are TRUCK-LITE 60. Is this the correct part # for replacing mine or is there another I...

Can you tell me the mounting screw pattern of this light? What I mean is how far apart are the mounting screws. Thank you | There are 4 mounting holes in a rectangular shape, centered in the fixture. From center to center, the holes are 4...

Im looking for a high quality flush mounted LED with about 10 elements for my flatbed project. Would prefer a smoked lens if offered. A sample picture is attached. Any help is appreciated! | For what you are looking for I think our best looking...

Do you have any trailer backup white led lights with a bracket? I’ve searched multiple areas on the website and most just look like they either fit an existing hole or one has to be cut into the trailer to mount. I’m looking for one two install...

I purchased 10 of your Euro Style Double ceiling lights #RViL22 and need some replacement bulbs. Are they available? | Yes, the replacement bulbs for the RV Euro Style Interior Double Ceiling Light with Built-In Switch part # RVIL22 are the...

Hi! Im going to be pulling a 2006 Honda Odyssey EX-L as a Toad for a 6,000 mile trip through mountains, etc... I have the ReadyBrake system, Blue Ox tow bar and base plate all rated for my weights. I wanted to know if I have to supply power...

Hello, I crashed my interior furniture light from International truck Gulf Stream Supernova 6362 Do you have glass for it? or complete part? Part number is Z4-738-WC date 2006, or 39U4 | Usually a light's actual part number is found on the base...

I’m having trouble locating a replacement lens for my left-side marker light, which is positioned over the license plate and has a clear lens on bottom. Please advise. | The side marker light lens like # 56-15R you referenced normally does...

Hello, Will this tail light fit a 2018 Coachmen Clipper ST108 ? STL178RFPB It looks like a good fit, but I want to make sure. Thanks | The GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Red Lens #...

I dont see voltage range. Many LED lights are now multivolt ie 12-32v So what is this lights range?? | I checked with the manufacturer, the GloLight Uni-Lite Mini LED Clearance or Side Marker Light item # MCL111AKPG has a voltage range of 8-16...

the Optronics LP25SB Does that include the light and the housing bracket if not do you have a part number for both | The Mounting Bracket for Optronics LP91 and LPL91 Series Trailer License Plate Lights # LP25SB is just the housing bracket only....

I need a pair just like these but I need them in clear/white for back up lights. Im having trouble locating the same type | The closest backup light that we carry to the 4 Inch Round LED Trailer Light, # STL42RB, is the 4 Inch Round LED Backup...

I was wondering what size hole this light would fit into? Im replacing the tail lights on a 1974 Blair Horse trailer, and the original hole for mounting measures 4 5/8inch in diameter. The original light was about 4 1/2inch in diameter with...

my boat trailer was bilt in 97 .reflector bilt or sold by trucklite numbers on lite 6352 hr07 12v model 10. i believe its your mc57ab.can you help? | According to my research, I have found that the Trucklite model 10 clearance/side marker light...

can i surface mount the mc57ab? if so what do i need to order? | The Optronics 2-1/2 Inch Flush Mount Trailer Light, # MC57RB, requires a grommet and 2 wire plug, # A46PB, and is not designed to be surface mounted. The 2 wire plug would interfere...

Im trying to add a new wiring harness which has 4 wires. The trailer I purchased has a yellow, brown and green that has a green/black split on it so the green is really 2 wires. So why the two green wires? | It sounds like you have a wishbone...

I bought Curt Hitch Cargo Carrier - C18131 from etrailer. I believe I will need some sort of light kit and also illumination for my license plate. FYI, I have a standard light kit wire with connector that Ive used in the past for a rental...

I currently own a Roadmaster Falcon All Terrain tow bar. I have recently purchased a used 2008 Mini Cooper S Hardtop as my new toad. I need a base plate for the car but need to know what else I need to connect the car to the tow bar. Is there...

does this light have a switch? or do I have to wire one? | The Optronics Opti-Brite LED RV Dome Light # ILL36CB you were looking at does not include a light switch, so to operate this light you will need to add one like the # 37212225. An easier...

I need to replace a rear brake-turn signal light on my 2000 Burro I only have 2 wiresblack-whitehow do I hook up a three wire unit? | The brake lights and turn signals on your 2000 Burro trailer are on the same circuit so the two wires you have...