Center Cap Solution for Dexstar Conventional Steel Wheel part # AM20766
I am purchasing your 16/6 8 lug dexstar rims. do you have any retro looing center caps that fit these wheels? | For the Dexstar Conventional Steel Wheel part # AM20766 that you are interested in we do not carry any babymoon covers that would...
Hubcap For 16 Inch Dexstar Conventional Steel Wheel AM20758
In January I bought four AM20758 Dexstar Conventional Steel Wheel - 16 x 6 Rim - 6 on 5-1/2 - Black Powder Coat wheels. Now Im wondering which of your hub caps fit the wheels? Thanks for helping me shop. | Appreciate the purchase, and there...
Option For 16 Inch Steel Trailer Wheel With 4.9 Inch Center Bore
looking for steel with chrome 16 wheel. 4.9 center bore. | We do have 16 inch steel trailer wheels with a 4.9 inch diameter center bore, and though there are none with a chrome finish, they do have a silver powder coat, and you can add covers...
Will the Phoenix USA QuickTrim Hub Cover Fit On 17" Steel Wheels With A 5 On 4-1/2" Bolt Pattern?
Hello, i recently put some 17inch steel wheels on my vehicle for the winter. The bolt pattern is 5 x 4.5. I was wondering if these would fit with my standard lugs? Really just looking for a little extra protection | Yes, the Phoenix USA QuickTrim...
Bearing Kit and Hub Cover Recommendation for 3,500 lb Trails West Horse Trailer
Hi, I have a Trails West horse trailer which, they tell me, has a 3500# torsion axle. Could you tell me which axle bearing kits I need for this and also, do you have the hub cap to suit? Its chromed plastic. Regards, | The bearing kit you'd...
What is the Difference Between Left-Handed and Right-Handed Threads?
For rear center cap hub why right hand or left hand thread | Even though most threads on bolts use right-handed bolts/nuts, some special scenarios warrant a left-handed thread. When wheel accessories like the Phoenix USA Rear Wheel Center Cap...
Will A 5 x 4.5 Hub Cover Fit A 5 x 4.25 Wheel Bolt Pattern
I regret my English is not very good I am a French Canadian, I want to know if it fit on my my bolts pattern is 5 x 4.25. THX | If the bolt pattern is indeed 5 on 4-1/4, then the # PXQT545BHS will not be a fit. The Phoenix USA QuickTrim...
What Center Cap Fits The Dexstar 15" Conventional Steel Wheel # AM20514?
Item # AM20514 I am looking to replace my aluminum wheels on my 13,000 GVRW fifth wheel. I have upgraded the tires to 14 ply and want to be able to take full advantage of them by running them at 110 psi. The current factory wheels can only...
Is There Utility Trailer Trimmer Carrier that Can Carry Curved Trimmers
Hi All, I see you have the racks fir the straight trimmers, but can these same one be used for curved trimmers? I’m looking to put a rack in my enclosed trailer that would hold 2 curved trimmers. Also, what would you suggest for holding...
Will Phoenix USA QuickTrim Hub Cover QT545C Fit Over Bearing Buddy
Will these fit over buddy bearings | Yes the wheel cover part # QT545C that you referenced does fit over Bearing Buddies. We had a customer come back and tell us these easily fit over them. |
Replacement Center Cap For Phoenix USA Rear Hub Cover # PXQ820R
Can you please provide a part number for the center pop out cover on the PXQ820R? | I reached out to Phoenix USA and was able to determine that the center cap of the Phoenix USA Rear Hub Cover # PXQ820R is part # PHX59FR. |
Is the Bracket for the Phoenix USA Wheel Center Cap Offered Separately
What are the part numbers for the bolt and bracket kit? | The Phoenix USA Wheel Center Cap part # PXQ1009 which is for a 6-1/2" diameter axle or the Phoenix USA Wheel Center Cap part # PXQ1020 which is for a 8-1/4" diameter axle already comes...
How To Determine Fit of the Phoenix USA Center Cap For Motorhome Rear Wheel
Not sure what the axle diameter is. I measured the remaining hub cover on the motorhome and it measures about 8 1/4inch in diameter and about 6 1/2inch deep, will this cover work? It is for a rear wheel. | The Phoenix USA Wheel Center Cap...
Dust Cover Needed for 7/8" Lug Nuts with an 8 on 6-1/2" Bolt Pattern
Do you sell center caps or dust covers to fit over the lugs on a 16 inch wheel with 7/8 inch lug nuts. Road salt and moisture causes the lugs to rust on my livestock trailer. There are 8 lugs per wheel. | We have exactly what you are looking...
Will Phoenix USA QuickTrim Ring Cover # QT6556CLO Fall Off Easily
I am interested in these, but if they fall off they are a bad investment and I will assume Phoenix wont guarantee that fact. Without any recourse, I am reluctant to buy without some more positive attachment system....hopefully I am wrong and...
How To Help Ensure the Phoenix USA QuickTrim Hub Covers Do Not Fall Off
Do you have any recommendations on how to keep these from falling off when going down the road ? | If you are having issues with the Phoenix USA QuickTrim Hub Cover part # QT655C falling off then I recommend wrapping a few of the lug nuts with...
Will the Phoenix USA Quick Trim Hub Cover for 8 on 6-1/2 Bolt Pattern Wheels Fit 21mm Lug Nuts
Lug nuts are 21mm. Will this hub cap fight properly? Close enough? | Yes. The Phoenix USA QuickTrim Hub Cover - 8 on 6-1/2" Bolt Circle - ABS Plastic - Chrome - Qty 1 # PXQT765CHN typically will fit on 13/16" lug nuts; when you convert to metric...
What is the Replacement Bolt For Wheel Center Cap for My 2007 Winnebago Tour
Looking for passenger side freightliner axle hub cover bolt. Looks like your catalog part Replacement Center Attachment Bolt for Phoenix USA Wheel Center Cap - 73 mm Item # PHX84FR but need i believe left hand thread for passenger side | I spoke...
How To Determine The Correct Lug Nut For Motorhome Wheel
Do you have the lug nut that goes under the chrome cap. For A 22.5inch wheel | To find the correct sized lug nut you would need to measure the diameter of the stud and the thread pitch to determine the correct fit. From there you could choose...
Does Hub Cover PXQT765BHN Fit Trailer Wheel TA76FR
what cones will fit the wheels I purchased thanks | I just checked your order notes and it looks like you ordered the part # TA76FR. This wheel has a bolt pattern of 8 on 6-1/2 inches so the correct hub cover you would need is the part # PXQT765BHN...
Can I Use The Phoenix USA Quick Trim Hub Cover On A 2017 Honda Accord
Looking at part PXQT545BHS. Another customer shows they fit over the lugs on a Subaru, presumably with steel wheels and snow tires. Id like to do the same on a set of 16 steel wheels/lugs on a 2017 Accord. The pattern is 5X4.5, so that is not...
Is Dexstar Steel Spoke Trailer Wheel 16-1/2 Inch with 6 Bolt Available in Chrome or Gray?
I’m inquiring about this wheel, as to weather or not it’s available in gray or chrome as well ? Thank you Dexstar Steel Spoke Trailer Wheel - 16-1/2 x 6-3/4 Rim - 6 on 5-1/2 - White Powder Coat Item # AM20720DX | The Dexstar Steel Spoke Trailer...
Does The Kenda Karrier ST205/75R14 with 14" Black Mod Wheel # AM32131 Include Lug Nuts?
Does this rim and tire combo come with lug nuts ? | The Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel # AM32131 only comes with the wheel and tire. We do have a few options which will allow you to choose the look you...
Availability of Dexter Conventional Steel Wheel - 15 x 6 Rim - 6 on 5-1/2 With Tire Mounted?
Do you see a combo of the Dexter Conventional Steel Wheel - 15 x 6 Rim - 6 on 5-1/2 with the tire mounted. I also need baby moon hub caps to fit. | The Karrier ST225/75R15 Radial Trailer Tire with 15" Black Steel Wheel # AM32575 is currently...
Filter Your Search
Contact and Help