Will the Phoenix USA QuickTrim Hub Cover Fit On 17" Steel Wheels With A 5 On 4-1/2" Bolt Pattern?

Question

Question:

Hello, i recently put some 17inch steel wheels on my vehicle for the winter. The bolt pattern is 5 x 4.5. I was wondering if these would fit with my standard lugs? Really just looking for a little extra protection

asked by: Aaron

1

Helpful Expert Reply:

Yes, the Phoenix USA QuickTrim Hub Cover for Trailer Wheels # PXQT545BHS you mentioned is going to be a fit for your 17" wheels with a 5 on 4-1/2" bolt pattern.

This hub cover is made from ABS plastic, has a glossy black finish and offers aan easy installation by simply snapping onto the wheels lug nuts.

expert reply by: Bryce D

1

Answer 1

The D in 175/80D-13 indicates that it is a bias ply tire where as the R in 175/80r-13 indicates that it is a radial tire. The difference is how the steel belts inside are oriented. Bias ply tires are generally better in off road types of situations.…

view full answer...

Answer 2

The Phoenix USA QuickTrim Hub Cover for Trailer Wheel #QT545C will fit as long as you have a 5 on 4-1/2 bolt pattern with 1/2" lug nuts. I wasn't able to find any good pictures which show your wheels so you will need to double check your…

view full answer...

Answer 3

The difference between the letter D in your ST175/80D13 and the R in the tire size of the Wheel and Tire ST175/80R13 part #AM31985 that you referenced is the tire construction. D stands for bias-ply which is a less preferred tire construction,…

view full answer...

Answer 4

The Phoenix USA QuickTrim Hub Cover for Trailer Wheels - 5 on 4-1/2 - ABS Plastic #PXQT545BHS is designed to specifically fit over 1/2" lug nuts and not the longer lug not locks. So if you wanted to use this or any other hub cover you would need…

view full answer...

Answer 5

There is a great option for a hub cover that will work with the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 but one does not come included with this combo. I recommend using the Phoenix USA QuickTrim Hub Cover…

view full answer...

Answer 6

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 7

Hey Andrew, The CE Smith Trailer Axle Beam with Studded Hubs #CES84XR is a 1-1/2 inch square axle tube.

view full answer...

Answer 8

The maximum life span of a trailer tire is typically 5 or so years, so you're absolutely correct in thinking they should be replaced. They're probably pretty cracked up and dry-rotted at this point. If at all possible, I'd go with the…

view full answer...

Answer 9

I was able to confirm that the Kenda 5.70-8 Bias Trailer Tire with 8 White Wheel - 5 on 4-1/2 - Load Range D #AM30155 are the correct fit for your trailer. I was also able to confirm that your trailer has 3,500 lb Dexter axles so you will use the…

view full answer...

Answer 10

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Hey Dianne! The Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches item #ERT00108 weighs 35-1/2 lbs. What vehicle are you planning on using these on?

view full answer...

Will the Phoenix USA QuickTrim Hub Cover Fit On 17" Steel Wheels With A 5 On 4-1/2" Bolt Pattern?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching