What License Plate Frame do I Need for a 7" x 4" Motorcycle Plate?
good day...how are you ? i am really likening this plate frame and search nearly the whole internet for motorcycle size ,7inch by 4 inch .....my Harley is custom and that plate will definitely compliment it lol...is there any resources that...
Will Fastener Caps # CR82650 Work for License Plate Screws/Bolts on a 2018 Chevrolet Camaro
I bought a 2018 Chevy camaro and dont know the size of these unsightly bolts but they are what I hear the rust proof ones they standardly use. Will these fit over them? | The Cruiser Fastener Caps # CR82650 that you referenced are a universal...
Recommended Bolts for Cruiser Bowtie License Plate Frame
looking for bowtie license plate bolts or screws 8 in a pack | It sounds like you are looking for bolts for your Bowtie license plate, like the Bowtie Cruiser Frame # CR10437. The bolts # CR81200 are the correct standard bolts and nuts for...
License Plate Mounting Anchors for BigTex 70TV Trailer
Im new at this. My BigTex 70TV trailer has two 3/8inch square holes in only the outer surface of the square tube frame. What fasteners/fastening system should I use? If its CR81200, can I be sure the plastic plugs never pop out? | The 3/8...
Locking License Plate Screw Kit for a Honda Accord
Honda says their license plate screws are M6 1-20. 1inch long metric. It doesnt appear that this part will fit. Does the manufacturer make one that would? | Since the Star Pin Locking Fasteners # CR81200 comes with new nuts for the screws...
Does Cruiser License Plate Frame # CR15350 Have Tabs on Rear to Prevent Rattling
Do these License plate frames have tabs on the back to hold the license plate in so the plate does not rattle? | I went into our warehouse and grabbed a Cruiser License Plate Frame # CR15350 you referenced to check if this item comes with the...
Size of Tapping Screw # CR80430
What is the size of this tapping screw head and what is the length of the screw? | The size of the self tapping license plate screws # CR80430 that you referenced is 1/4-14 3/4-inch. |
Dimensions of License Plate Screws and Hardware Kit
What is the diameter of this bolts?CR80230 I bought another one which diameter is 1/4 and it was too big. It did not fit the hole. 2016 Lexus ES350 Thank you very much! | The Steel Fasteners for License Plates and License Plate Frames - Standard...
Rear License Plate Bracket Recommendation for a 2007 BMW 328xi
Will this part fit a 2007 BMW 328xi rear? | Yes, the Cruiser Accessories License Plate Mounting Plate # CR79150 can be made to fit nearly every vehicle so it would work well on your 2007 BMW 328xi. |
Availability of Black Motorcycle License Plate Frame with Smoke Cover
Do you have the smoke cover and black frame for motorcycle size plates? | While we do not have any motorcycle license plate frames with covers at present, we do have a nice selection of black frames by Harley-Davidson. I have included a link...
Would Star Pin Locking Fasteners for License Plates and Frames # CR81300 Fit 2013 Volkswagen Jetta
Hello, Do you think this product will fit my Jetta Sportwagen 2013? Star Pin Locking Fasteners for License Plates and Frames - Stainless Steel - Metric - Qty 4 Item # CR81300 Thank you | Yes, the Star Pin Locking Fasteners for License...
Dimensions of Tuf Combo License Plate Frame CR62052
Need to know exact sz of this plate frame, as the previous owners had a metal frame on that rubbed the paint off. Im needing to cover that. | I checked with the manufacturer and was able to get the exact dimensions for you of the Tuf Combo License...
Are Tinted License Plate Covers Legal
i live in missouri and wondering if this is legal in my state? tuf flat shield for license plate- smoke | At this time the Missouri Department of Revenue website states that all parts of the license plate must be visible and clear for inspection....
Material of the Cruiser Accessories License Plate Mounting Plate # CR79150
What material is this made out of? | The Cruiser Accessories License Plate Mounting Plate # CR79150 that you referenced is made of ABS black plastic. |
Availability of Christian License Plate Frame
Quote for license plate frames. 100 pieces. Written or with an inscription JESUS top and CHRIST on the bottom. Thanks | I have some license plate frames that you may be interested in, but we do not have anything like what you described. I...
License Plate Frame Recommendation and Quantity Included for Slim Rim License Plate Frames
Does this include both the frame for the front and back of vehicle? | The Slim Rim License Plate Frame # CR21330 is sold in quantities of 1. So for the front and the back of a vehicle you would need to order 2. I have linked a video featuring...
Adding a License Plate Bracket to Carpod Hitch Mount Cargo Carrier
Im interested in: 24x48-3/4 Carpod Walled, Folding Cargo Carrier - 2inch Hitches - w/ Lid, Bag, Rise Shank - 450 lbs Item # M2205-01-02 I drive a 2010 Ford Expedition and am concerned about the carrier blocking the license plate. In NYS, license...
Front License Plate Frame Needed for 2007 Toyota Tundra
The license plate on my 2007 Toyota tundra truck is only attached by 2 screws and I have found that the car wash places practically rip off the holder. Will these be better? | Yes, if you only have two top bolt holes available on your 2007...
Which Locking Fasteners For License Plates Will Work For Subaru Crosstrek And Ford Fiesta?
would these work for a 2018 Subaru cross trek or a 2012 Ford Feista? | Technically, the Star Pin Locking Fasteners for License Plates and Frames Standard # CR81200 are made for domestic vehicles like the Ford Fiesta, while Star Pin Locking Fasteners...
Will the Elite Stainless License Plate Frame Part # CR21010 Fit a 2018 Acura ILX
Hello, I am interested in the Stainless Steel License plate frame part # CR21010. It is stated that it is 5-3/8 inches tall internally and 11-13/32 inches wide internally. I will measure my current frame tomorrow. I was wondering if you...
Self-Tapping Screws to Install Cruiser Accessories License Plate Mounting Plate
what screws do I need to install this to my bumper, the only reviewer that you have posted says this does not have screws to install to bumper, so what ones do I need and do you sell them? | You will likely need some self-tapping screws. They...
Spring Loaded License Plate Frame For Open Snowmobile Trailer Use
I need to mount a plate on a 20 ft open snowmobile trailer. I keep tearing the license off and even loosing it as snow and ice continually hits it on the highway. I am just wanting your input on using this on an under frame license mount...
Mounting Hole Dimensions Of Eagle Motorcycle License Plate Frame
Can you tell me the measurements of the top hole centers and side hole centers? Thank you | Yes, The Eagle Motorcycle License Plate Frame part # CR77023 mounting holes measure 6" apart on top and 3" apart on the sides. The elongated holes themselves...
Will the Cruiser Locking Fasteners for License Plates and Frame # CR81200 Fit a 2003 PT Cruiser
Hi, can you tell me if this is the right license plate fastener for my 2003 PT Cruiser? Old plate stolen, along with fasteners. Thanks. | The Locking Fasteners For License Plates and Frames, # CR81200, is not a vehicle specific item, but it...
Filter Your Search
Contact and Help