Can the Rackem Tailgate Lift Assist be Installed On Either Side of the Trailer
Can the lift aassist be installed on either side of the trailer? | The Double Barrel Tailgate Assist, item # RA-27C, has 2 mounting holes to secure it with bolts to the top rail of your open trailer on the roadside. This frees up rail space...
Rack Em Trailer Tailgate Assist, Part # RA-27C Install on Pipe Top Trailer
Are there special instructions for installing on a pipe top trailer? Any modifications to trailer needed? | The important consideration with the Rack em Double Trailer Tailgate Assist is the height at which it is mounted on the trailer relative...
Can the Rackem Trailer Dolly # RA20 be Used with a Bota Trailer That Has a 2 Coupler
Will the Rackem RA20 do the job of moving my boat into the garage. I have a two inch ball? Thanks | The Rack'em Trailer Dolly # RA20 uses a 1-7/8" hitch ball but since the trailer will be pulled by hand instead of being towed at a faster pace...
Correct Placement of Rack 'Em Lock 'em Magnum Wheel Lock
I use the rackem wheel lock on a trailer. Does it matter if it is placed on the front of the tire hitch end or the rear of the tire? | The Rack 'em Lock 'em Magnum wheel lock, part # RA-25, can be installed on the front or back of the tire....
Grass Catcher for a Toro Timecutter 16-42Z Mower
I am looking for a grass-catcher for a Toro Timecutter 16-42Z. Do you have any that fits? | For your Toro Timecutter 16-42Z you need one of the following depending on what kind of deck you have: - Standard Deck # RCMMS4-EXS1 - Z-Cut Deck...
Will Rack'Em Wheel Chock Fit with a 1997 Honda Valkyrie Tourer
will this work with a 1997 Honda Valkyrie Tourer? | The Rack'Em Manufacturing Removable Wheel Chock # RA-17 is compatible with tires up to 6-1/2" wide so if that's the case with your 1997 Honda Valkyrie Tourer then this will work just fine! |
Using E-Track, Tie-Downs, and Wheel Chocks to Haul 2 Harley Davidson Motorcycles
Plan to haul 2 Harley Ultra Classic. I was thinking of putting 10 ft down middle of trailer and also along each side. Also 1/8inch steel plate under 3/4inch plywood floor. Use 2inch x 6inch strap w/ D-ring and ratchet. Is a wheel chock also...
Will the Trailer Valet # STC-V211 Fit a 2011 Jayco Pop-up Camper
I really want a Trailer Valet but am not certain it will fit my 2011 Jayco 1208 popup camper. The Valets mounting bracket may be wider than the space I have available to mount it on the frame. I also need to know if there will be room to swivel...
Grass Catcher that Can be Used with Wright Stander and Toro 52 inch Grandstand
I have a .......... 2013 Toro 52” Grandstand ....... and, 2019 Wright 36” Stander I Zero Turn mower’s. Want to know if I can use 1 Grass Catcher that can interchange between the 2 different mowers that I have list above ? ........ and...
Will Trailer Valet # STC-V211 Fit an Evolution E1 Pop-up Camper
I am picking up a 2005 Fleetwood Evolution E1 10foot Box today. I have a small yard and tight driveway. I will need to move the camper around the back yard a bit to get it into its storing position. The grade is level with grass. Would you...
Hitch and Motorcycle Carrying Options for 2012 Ford Focus Hatchback
Hello I need to get a bolt-on hitch for my 2012 Ford Focus Hatchback. I plan to put a motorcycle carrier on the hitch because I am moving from California to Illinois and of course cant be without my bike. The motorcycle weighs just under 500lbs. Thanks...
Ramp Assist Recommendation for a 60 lb Ramp
I am in need of a ramp assist but not sure if it will work for my application. This is actually a material elevator, the ramp weighs approx. 60 lbs. and the amount of dead pull is about 40lbs. I would like to send a photo, so you can understand...
Axle Diameter and Tire Size of Rack 'Em # RA20 Trailer Dolly
Hello, I have a Rackem trailer dolly and want to put bigger tires on it. Do you guys have bigger tires that will fit on the axel? if not can you tell me what the axel diameter is and rim size is ? Thanks | We do not offer a larger tire...
Is Installation Hardware Included with Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28
In the installation video for the rack em fitz all ladder rack what type of screw are used to secure the ladder rack to the trailer and where can I find them? | Hardware is included with the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28....
Using Rack Em Wheel Lock on Trailer that is Parked on Incline
I have 2019 Keystone Premir 30RI travel trailer. The driveway I want to park it on has a slope to it. I want to be able to lock the wheels so they cant turn | I recommend using the Rack'em Lock'em Magnum Wheel Lock # RA-25 with a wheel chock...
Grass Catcher for Toro Pro Line Model 44454
I am looking for a grass catcher for a Toro Pro line model 44454. | Since your Toro has the Z-Cut Deck you definitely want to go with the Rack'em Grass Catcher # RCMMS4-EXS1-TORO for a grass catcher. |
How Many Bars Are Included with the Ra-28 Ladder Rack?
Can I get 3 of them? Or do I have to order 2 sets? | I spoke to my contact at Rack'em and he informed me to get a set of 3 you would need to purchase 2 sets of the # RA-28 that include 2 bars. For added strength He suggested using the 4 bars...
Grass Catcher for Toro Grandstand 36 Mower
What grass catcher do I use? And does it come with the face plate and parts? Thanks, | For your Grandstand 36 the Toro catcher model to use is # RCMMS4-EXS1-TORO that you referenced. |
How To Mount the RackEm Double Barrel Tailgate Lift to Trailer with 23 Inch Sides
This regarding the rackem tailgate lift. The information state the rails should be up to 15 inches. Is there anyway it will work on a trailer with 23 inch sides? Thank you. | You can certainly use the Double Barrel with your trailer that has...
Grass Catcher that Fits Husqvarna Z254 Special Edition
Does this grass catcher fit a z254F special edition. Thanks | I checked with Rack Em and the correct grass catcher for your Husqvarna Z254 Special Edition is the part # RCMMS4-EXS1. |
Recommended Manual Trailer Dolly for Camper with 375 Lb Tongue Weight
I have a popup camper weighing 3000 lbs, with a tongue weight of 375. Need to manually maneuver this in my level concrete carport. I can move it with the double 6inch wheel but its difficult as it doesnt turn easily. Which manual unit will work?...
How Difficult Would it be to Move a Trailer at a Campground With the RackEm Trailer Dolly # RA20
How hard would it be to move the trailer at a campground with uneven surface. | The Rack'Em Trailer Dolly # RA20 that you referenced can move along surfaces other than flat asphalt. The question of how hard would it be to move your trailer...
Which Rack Em Grass Catcher Fits Scag Cheetah Mower
I was wanting to buy a grass catcher and extension for my SCAG mower. It is a Cheetah model SCZ52V-730FX. I believe it has a standard deck, but wanted to make certain before ordering. | I checked with Rack Em and the correct Grass Catcher for...
Additional Base Plate for the Rack'em Manufacturing Removable Wheel Chock Part # RA-17
I would like to buy a RA-17 wheel chock and an additional base plate. What is the part # for a extra base plate | The part number for the base plate used in the Rack'em Manufacturing Removable Wheel Chock part # RA-17 is the Steel Replacement...
Filter Your Search
Contact and Help