Is The SeeLeveL Sensor for RV Holding Tanks Compatible With Metal Tanks?
Can the monitor be used on a stainless steel tank? | I went ahead and checked out the SeeLeveL Sensor for RV Holding Tank Monitor # SE78VR and unfortunately they are not going to be compatible with metal tanks. These sensors will work on most...
What Is The Wiring Diagram For The SeeLevel Monitor # SE94VR
I am trying to connect this and have no wiring diagram. I have created my own of what I did, and it’s not working. Do you have a wiring diagram for this? I bought it from etrailer a couple of years ago and have never been able to get it to work....
Do We Carry SeeLevel 709-4 For Fresh, Gray, Black, & Galley Tanks
Do you carry the SeeLevel 709-4 4 tank system. Fresh, gray, galley, and black tanks? | Hey Frank, thanks for the question and yes we do carry the SeeLevel 704-4, with the monitor and sensors coming separately. For the monitor you need the SeeLeveL...
Recommended Replacement Holding Tank Sensors For A 1998 Goergie Boy Cruise Master Motorhome
I have a 98 class A Georgie Boy Cruise Master on a Freightliner chassis with holding tanks that have wired sensors into the tanks all displaying on the range hood. Does anyone make a replacement sensor that is non-immersive and will wire into...
How Do the SeeLeveL RV Holding Tank Monitoring Sensors Work for Propane Tanks
RE: SeaLevel Systems The various units describe the monitor strip for holding tanks, but dont say how the Propane tanks are monitored. Where does the monitor panel get propane level info? My trailer does not currently measure propane levels....
Are SeeLevel Sensors 710-AR & 710-ES2 Available
Do you carry the 701AR and 701ES2 sensors | We have the 710-AR and 710-ES2 SeeLevel sensors, though I was unable to find any 701AR or 701ES2. If you were referring to the 710-AR and 710-ES2 you would need the following: - 710-AR: SeeLeveL Sensor...
What is Purpose of Pump Switch of SeeLevL Monitoring System SE39VR
The pump switch is just another place to turn on/off the water pump. Or is there another reason for it? | Correct, the pump switch of the SeeLeveL RV Holding Tank Monitoring System # SE39VR provides an additional way to activate the water pump. |
SeeLeveL RV Holding Tank Monitoring System & Display
The pump switch is just another place to turn on/off the water pump. Or is there another reason for it? | It is a 3-way switch. The SeeLeveL RV Holding Tank Monitoring System, # SE39VR includes a panel that incorporates readings for sensors...
Availability of SeeLevel System that Has Levels for Fresh, Gray, and Black Water
Do you carry the SeeLevel 709-N2K-NLP? This is the display that has the NMEA2000 interface. Thank you, | That part number corresponds with a SeeLevel system that has sensors for a fresh, gray, and black water tank like the part # SE39VR but...
Recommended Replacement RV Fresh Water Tank for Thor Tahoe Transport Travel Trailer
Looking for 2ea potable water tanks. 60 length x 36 across x 6 depth. With sensors installed. 03 25 Tahoe Toy hauler by Thor | The closest match we have for what you're looking for is the Valterra RV Water Tank part # R8060 which measures 60"...
Can The SeeLevel RV Holding Tank Monitoring System # SE59VR Be Mounted At A Diagonal?
Concerning See Level sensors, have you tested sticking the full sensor strip on a diagonal to a shorter tank. If it works it will show a finer reading using more of the graduations. Like laying a 12inch ruler slanted on a 1x4 board, if you mark...
Where Is The Power Source for External Tank Sensors
There is no direct discussion for hooking your system to an electrical power source. Am I to assume that two wires must be run ro one of my chassis batteries? | The SeeLeveL RV Holding Tank Monitoring System, # SE39VR operates from a 12 VDC...
Can SeeLevel Tank Sensors Be Mounted On Water Tanks Under A Van
Im looking at the Seelevel sensor mounting on my water tank. Is this suitable for a tank mounted underneath the van? Thanks. SeeLeveL SE27VR | Yes, the SeeLeveL Sensors # SE27VR can be used on a tank mounted under a van. You'll just want to...
Will SeeLevel Sensors Work With OEM Water Tank Sensor Monitors
The sea level sensor would it work with a standard monitor that has readouts by the 1/3 or do I need to add or replace my present monitor? Thank you | The SeeLevel systems will require you to replace your current monitor in order to properly...
Differences Between SeeLeveL RV Holding Tank Monitoring Systems # SE33VR and # SE39VR
2022 RENEGADE VERONA 40VBH: CONSIDERING THE PURCHASE OF A SEELEVEL SYSTEM FOR OUR COACH AND NEED SOME GUIDANCE FROM THE EXPERTS: 1IS THE ONLY DIFFERENCE BETWEEN THE MODEL SE39VR and SE33VR THE BLUETOOTH CAPABILITY? 2WILL EITHER OF THE TWO...
Do You Cut Tabs on Both Stacked SeeLevel Sensors SE88VR
SEELEVEL SENSORS 710-AR When stacking the sensors do you have to cut the tab on both sensors or just one? | Per SeeLevel, for a stacked configuration of the SeeLeveL Sensor for RV Holding Tank Monitor - 9" Long # SE88VR you just cut the top...
Do SeeLevel Tank Monitor Screens Stay On Always
Hey, does this show the percentage always, or does the screen go black when you arent using it? Constantly trying to reduce lights in the van, so Id prefer it wasnt always lit | The SeeLeveL RV Holding Tank Monitor # SE94VR shuts off after just...
Voltage Used by the SeeLevel Sensors # SE27VR
What is the output voltage on the sensors? | The SeeLevel Sensor part # SE27VR that you referenced runs on 12 volts. |
Can SeeLeveL Sensors Work with Redarc RedVision Total Vehicle Management System
Hi, Im wondering if the see level RV tank sensors SE78VR can be used along with the Redarc TVMS system. | The SeeLeveL Sensor # SE78VR is designed to be used with the SeeLeveL RV Holding Tank Monitor # SE44VR and won't work with the Redarc RedVision...
Availability of SeeLevel 709-2P Holding Tank Monitor
Do you carry SeeLevel brand monitor p/n 709-2P? | Yes we do carry the SeeLevel 709-2P with our part number # SE94VR. This is just the monitor you are looking for. The part # SE49VR that you mentioned includes the monitor but also sensors. |
Is There A Holding Tank Sensor System Compatible With Lippert's OneControl Or ASA's InCommand System
Replacement tank sensors : Do you know of an external holding tank sensor that is compatible with the Lippert inCommand display panel? I am hoping to cut the wires to the internal sensor and jump the replacement external sensor to the existing...
Replacing Older Winnebago RV Tank Monitor Display with SeeLeveL RV Holding Tank Monitor
Will the SE74VR replace an older monitor that is in a 1998 Winnebago RV? The monitor that is in it is showing inconsistant and wrong levels. Thanks for you help. | Yes, the SeeLeveL RV Holding Tank Monitor for fresh, gray, black - water pump...
Does the SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black, Galley Have Audible Alerts
Can the Seelevel Model 709-4 sound an audible alert when a tank is full? | The SeeLeveL RV Holding Tank Monitor part # SE84VR does not have any sort of built-in speakers so it will only display visual alerts. Therefore, you'll need to press...
Can the SeeLevel Sensor Be Used With a Simraine Pico Tank Monitor
Can SeeLevel sensor be used th Simarine Pico tank monitor | Mike, unfortunately not. The SeeLeveL Sensor for RV Holding Tank Monitor # SE78VR is designed to be used with the SeeLeveL RV Holding Tank Monitor # SE34VR, so it's not going to work...
Filter Your Search
Contact and Help