Recommended Weigh Safe Adjustable Ball Mount for 2-1/2 Inch Trailer Hitch
Is this measurement the inside or outside of the receiver tube? My 2017 F350 Platinum has a receiver that measures 2 1/2inch x 2 1/2inch inside the tube and 3x 3inch on the outside. | The Weigh Safe 180 Hitch 2-Ball Mount # LTB8-3 referenced...
Compatibility of Ball Mount Adapter # BA-1 with Weigh Safe Hitch Ball with Scale # WSUN-1
What is the platform thickness where the ball is installed? Iām looking for 3/4ā thick platform for my weigh safe tongue weight scale ball to mount on. I need an adjustable ball mount for my weigh safe WSUN-1 ball with built in scale. It requires...
How Much Does the 180 Hitch 2-Ball Mount w/ Stainless Balls LTB4-25 Weigh
I have got a steel hitch now with my trailer about 40 lbs want something lighter. | The 180 Hitch 2-Ball Mount w/ Stainless Balls part # LTB4-25 weighs around 16 lbs. |
Ball Set Recommendation for 180 Hitch Adjustable Ball Mount # LTB4-2 that Has 1-7/8 inch Ball
What ball to use to get 1 7/8 with this hitch | For a ball set for the 180 Hitch Adjustable Ball Mount # LTB4-2 that has a 1-7/8 inch ball and a 2 inch ball you'd want the part # TB03 and you'd be set. |
Towing a Jeep on a Car Hauler with my 2002 Silverado 2500 HD do I need WD?
I will be towing a jeep on a car hauler in my 2002 silverado 2500 hd. My tow ball is rated at 6000 pounds. My jeep weighs around 4500 not including the trailer. Will that be safe or will I need a ball thats rated for more weight? | All towing...
Should Tow Vehicle and Trailer be Level for Towing
Should the truck and trailer be level the rear of my 27 foot trailer is low I can the ball one bolt hole down. Should the whole rig be level ? | Yes. When you are towing you want both your tow vehicle and trailer to be level. To help you achieve...
Can I Use a Weigh Safe Ball Mount with a Weight Distribution Hitch
I am looking at this WD/Sway hitch and need to know if I can use my Weigh Safe Wsun-3 2-5/16in Universal Tow Ball no Clam Shell with it. | No. You cannot use a Weigh Safe ball mount like the # WS4-2 with a weight distribution hitch like the...
Best Way To Gain Tailgate Clearance With Electric Trailer Jack
Can you remove the four sockethead screws and rotate the motor assembly 180 degrees to get more clearance to allow lowering the tailgate? | There are other ways to help gain tailgate clearance, but disassembling the electric jack # 3370093500...
Will Curt Trailer Hitch 14332 Fit a 2003 Chevy Silverado 1500 Short Bed Step Side and Keep Spare
Will this hitch install on my stepside truck and can I leave the full size spare tire in place after the hitch is installed? Or do I have to leave the spare tire removed? | Yes, Curt trailer hitch # C14332 will fit your 2003 Chevy Silverado...
Weigh Safe 180 Adjustable Ball Mount Recommendation for 2-1/2 inch Hitch
Im trying to decided between the anderson rapid 6inch hitch with 2 1/2inch shank or the Weigh Safe 180 6inch with 2 1/2inch shank. Do you have a recommendation between the two? | Since you have a 2-1/2 inch hitch the easy answer is that what...
Availability of Adjustable Ball Mount with 1-7/8 Inch and 2 Inch Hitch Ball
I DO NOT NEED THE 2 5/16 BALL. CAN I CUT IT OFF? HOW HARD WOULD IT BE FOR ME TO BUY A 2inch X 17/8BALL? | I do not recommend cutting off the 2-5/16 inch ball portion from the dual ball unit included with the Weigh Safe 180 Ball Mount # LTB6-2....
Recommended Class V Trailer Hitch Receiver for 2001 Dodge Ram 3500 Dually
Does this receiver fit a 2001 Dodge Ram 3500 club cab 4x4 dually ? | I recommend the Curt Class V receiver hitch # C15300 for your 2001 Dodge Ram 3500 Club Cab Dually Pickup. This is a bolt on installation, so no welding is required. It comes...
Are there Stainless Steel or Aluminum Ball Mounts
do they make stainless hitches | There have been stainless steel ball mounts in the past but they were pricey so aluminum is the way to go now. Aluminum offers corrosion resistance, lighter weight, and a lower cost compared to stainless steel...
Should I use 8 Inch Drop Ballmount or 10 Inch Drop Ballmount With 9 Inches Between Hitch and Coupler
I am interested in the weigh safe 2 ball mount system but am unsure which size to purchase. My hitch is the factory unit measuring 23 inches to the inside top edge of the 2.5 inch receiver and 14 inches to the bottom edge of the trailer coupler...
Can Different Hitch Ball Sizes be Used with the 180 Hitch 2-Ball Mount w/ Stainless Balls # LTB10-25
Can I order other balls for this besides just the two provided? | You can order a different set of hitch balls to use with the 180 Hitch 2-Ball Mount w/ Stainless Balls # LTB10-25. This ball mount comes with a 2" and 2-5/16" hitch ball combination,...
Recommended Adjustable Ball Mount for Towing 3000 lb Trailer
Have it narrowed down to 2 adjustable hitches. In no particular order: B and W 5ā 2ball mount Weigh Safe 180 They all have some advantages, just tough to decide. Will be towing with a SUV to start, may eventually have a Ram 1500. Will be...
What Hitch Pin Diameter Does B&W Tow & Stow 2-Ball Mount # BWTS30040B Use
what size diameter pin does this require? | 3 inch hitches like what the B&W Tow & Stow 2-Ball Mount # BWTS30040B was designed for use the same hitch pin diameter as the smaller 2 inch and 2.5 inch hitch size which is 5/8 inch diameter. For...
2-1/2 inch Adjustable Ball Mount Recommendation for Use with a Rock Tamer Mudflap System
Will the 2.5 rock tamer work with a 2.5 6 in weigh safe hitch? | Yes, the RockTamers Mudflap part # ERT00110 would be compatible with the The WeightSafe 2-1/2 inch ball mount # WS6-25 that you referenced. We had a customer come back and tell...
Adjustable Ball Mount for 2.5 inch Hitch with Longer Shank
Compare weight with steel hitch. I have a toyota sequoia with a rear lift gate and need a long shank hitch to open the gate and clear my trailer. Can the shank length be chosen? | If you are looking for an adjustable ball mount that fits a...
Options For Reducing Sag While Hauling A Camper On A 2010 Toyota 4Runner
Ive recently purchased a 2016 Forest River 206STSE pop up camper and am towing it with a 2010 4runner LTD. I dont have any issues with pulling or braking, but its sagging and Id like to correct this for optimal towing. Is there a WD system that...
Ground Clearance Dimension for 180 Hitch 2-Ball Mount w/ Stainless Steel Balls # LTB8-2
21.5inch receiver hitch height. With this ball mount set at max of 8inch using the 2inch ball, clearance between the 2 5/16inch ball to the ground? | If you had the Weigh Safe Ball Mount # LTB8-2 in the max drop position with the 2-5/16 inch...
Can Fastway Self-Locking Adjustable 3-Ball Mount be Used with 3 Inch Receiver and Reducer Sleeve
2017 Ford F-350 with 3inch receiver . will # DTALBM6825-3S work with the ford provided 2.5inch reducer . Thanks | I spoke with my contact at Fastway regarding the Self-Locking Adjustable 3-Ball Mount 2.5 Inch # DTALBM6825-3S referenced in your...
Reducer Sleeve Needed for Diversi-Tech 2
I have a Diversi-Tech 2 inch ball mount with a 2.5 inch sleeve i used in my Denali. I recently bought a Ford F350 which is a 3 inch sleeve. Is there a sleeve that I could use to make the hitch work for me? Currently, I am using the 2.5 inch...
Tongue Weight Rating Of The 180 Hitch 2-Ball Mount w/ Stainless Steel Balls Part # LTB8-2
Whats the rated tongue rating on this hitch assembly? Can you confirm this is a true 8inch drop. Whats the exact measurement from the top of the inside of the tongue to the top of say a 2inch ball mounted? In other words will I have just as...
Filter Your Search
Contact and Help