Result: knobs

I have the Tekonsha 2030 Mark 12 it has a roller knob on the bottom and a slide knob on top what does the roller knob do? | I have the Tekonsha 2030 Mark 12 it has a roller knob on the bottom...

Would I be able to buy 2 Turning Knobs for this bike rack and do they fit 3/8inch Bolts. | Would I be able to buy 2 Turning Knobs for this bike rack and do they fit 3/8inch Bolts. | You'll need one of the following knobs based...

I am missing two of the knobs/bolts for 2 of the wheel hoops and wonder if the following part would fit: Replacement Knob and Bolt for Wheel Hoop on Swagman XC, XTC Quad 4 and G2 Bike Carriers, Code P199? |...

These TracKnobs replace the standard, quick-release knobs. | Is there any way to lock these racks? | The T-Rac Pro2 Truck Bed Ladder Rack for Full-Size Pickups, # TH37002XT does not have a lock available....

Hi, We lost the wedge from our speed knob on our Yakima bike rack. We don’t need the whole speed knob assembly, just the wedge. | Hi, We lost the wedge from our speed knob on our Yakima bike rack. We don’t...

What size is the screw to hold the knob in place?? | What size is the screw to hold the knob in place?? | The screw that comes with Replacement Operator w/ Knob and Screw for Ventline Vent # BV0115-04 is a machine screw #8-32...

You'd just unscrew the existing knobs, and screw in the locking knobs in their place. | How do you install these lock knob to your TracRac Pro2 | Installation is simple. You'd just unscrew the existing knobs,...

Initially I could easily turn the knob that tightens and clicks in place at the hitch. | My bike rack is less than a year old. Initially I could easily turn the knob that tightens and clicks in place at the hitch. I can no...

The knob on the right hand side of the controller is the power knob. | installing an older Tekonsha Commander on 79 suburban I have the 4 wires sorted I guess, but confused by purpose of the knob and switch...

If you unlock and remove the old lock core then the knob of your rack should then just spin off and you can repeat the same steps to install the new knob by threading the # TH79JV on. | Hi. I bought the knob...

Is it possible to get a replacement knob and bolt for this rack? The knob and bolt that attaches to the arm is missing. | Is it possible to get a replacement knob and bolt for this rack? The knob and bolt that...

Will this knob work on a Thule TracRac system? | Will this knob work on a Thule TracRac system? | Yes, the Replacement Knob for TracRac Ladder Racks, Item # TAKB-90030-1, should work for you. This knob fits most TracRac racks...

The red light on my furrion stove burner knob will not ever turn off. Which parts do I need to order to replace the light up board behind the knob? | The red light on my furrion stove burner knob will not ever...

Instead I checked # PF213324 which is very similar with brass on the inside and found that both knobs have a counter clockwise arrow on the knobs - presumbably to indicate on. | Im considering your Phoenix...

While applying the manual slide knob turn the power knob until the display reads 4.0. | How do you adjust this item? | I can help you with the set-up/adjustment procedure for the Pilot 2-6 Brake Electronic...

Locate the manual slide knob and power knob on the control. 3. Turn power knob to minimum. | Hello!! I just read your instructions for the Valley Journey Brake Controller. Would this apply...

If it turns out that the knob is indeed damaged then you can use the Replacement Locking Anti-Rattle Knob part # 753-0073 to replace it. | Thule Apex Swing 4 Bike Rack # TH9027 lock knob spins off. When locked...

can u replace the knob on a Thule T2 Pro XTR .its a large 4 bike hitch mount, not sure of the model the one i have seems to be partially stripped on the inside, it only tightens up a certain amount and if you turn the knob any more it slips. it gets it ok tight but not tight enough like you can geta kuat rack the an allen key. |

If the trailer brakes lock up, turn the power knob down. If the braking was not sufficient, turn the knob up. | hoe to set control | I believe you are asking how to adjust the settings for the Tekonsha Voyager...

If the knob is unlocked, another thing that helps is pushing in toward the vehicle while unscrewing the knob. | Looking for the release latch that lowers the bike rack so I can open the back tailgate door....

Do you have a Speed knob replacement for the Yakima Lite Rider rack? | Do you have a Speed knob replacement for the Yakima Lite Rider rack? Will the one you have listed work? Thank you | I do have an option for you but...

I’ve installed the rack into the receiver but turning the lock knob won’t tighten the rack to fix the wobble. The knob just spins as if it isn’t attached internally to the expansion piece in the receiver. |...

I reached out to my contact at Yakima regarding the speed knob on your Yakima FullSwing bike rack. The wedge on the end of the speed knob is not a seperately available part. | I lost the wedge on my fullswing...

Check the mounting hole spacing on your Sears box to confirm it is the same. The knob is # TH04877. To replace all the u-bolts and knobs you would need 4 u-bolts and 8 knobs. | Hi E-trailer...