Is the Torqueright Knob for the Yakima HighRoad Bike Rack Replaceable?

Question

Question:

I wonder if you guys carry the highroad torqueright knob replacement. Thanks

asked by: Jorge A

0

Expert Reply:

Unfortunately, since the Torqueright knob is integrated with the Yakima HighRoad Roof Bike Rack # Y75FR that part is not going to be replaceable.

If your Torqueright knob happen to break or is defective, you'd have to reach out to Yakima and get the rack replaced.

expert reply by: Bryce D

0

Answer 1

Is it possible your FrontLoader was built after 2016 which would mean you'd need the knob part #8880766 which has a different nut in it and would explain why the older knob #8880266 isn't threading correctly.

view full answer...

Answer 2

There shouldn't be another washer on the Replacement Red Knob for Yakima Frontloader Fork Mount Bike Carrier #8880226. That appears to be part of the internal threads on the red knob itself. To replace this piece you'll just have to replace…

view full answer...

Answer 3

To replace the knob on your Yakima FrontLoader #Y02103 you will remove the brass nut and bolt that keep the knob secure. If your FrontLoader was made after 2016 you need the #8880766. If it was made before 2016 you will need the #8880226 instead.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Is the Torqueright Knob for the Yakima HighRoad Bike Rack Replaceable?

Continue Researching