Do All Time-Delayed Controllers Have the Same Instructions for Setting Power
Published 07/27/2018
Question:
Hello!! I just read your instructions for the Valley Journey Brake Controller. Would this apply to all types of Time Delayed Controllers? I dont know who makes mine. No markings on it. Thanks!
asked by: Jason M
Expert Reply:
Most time-delayed controllers should have similar instructions. Take the Tekonsha PowerTrac # 39523 for example, it is a time delayed controller and has these instructions:
1. Connect trailer to tow vehicle.
2. Locate the manual slide knob and power knob on the control.
3. Turn power knob to minimum. Turn power knob in the + direction about a 1/4 of a turn.
4. Drive tow vehicle and trailer on a dry level paved surface at 25 mph and apply manual slide knob.
- If trailer brakes lock up:
- Turn power down using power knob.
- If braking was not sufficient:
- Turn power up using power knob.
5. Repeat Step (4) until power has been set to a point just below wheel lock up or at a sufficient force as to achieve maximum braking power.
The instructions could vary so it would be best to know which controller you have. I may be able to identify your brake controller for you if you can send me a picture.
