Result: knobs

The knobs themselves are 2-1/4" in diameter and 1-1/2" tall. | how many inches are between the ladder rack knobs that screw into the deck rail. I want to know if my tool box can fit in between the rack when installed in a tundra...

Im looking for replacement knobs for a Rola Haul your might truck rack. Also wondering if knobs from another brand of rack might work. | Im looking for replacement knobs for a Rola Haul your might truck rack....

If your Kelsey controller is the type that has a load knob on one side and the leveler knob on the other side try making adjustments to the leveler knob. | Have kesley controller when I apply...

The box can then be placed as far forward in the truck bed which will butt it up against the forward-most ladder rack knobs. You could then have the bolt that the second set of knobs uses go through the sides of the box and thread on the knob from the inside of the box to hold the toolbox in place though this may require a longer bolt. |

Is this knob the ground connection or what is the difference between the adapators that do or dont have this knob? | I have a 2003 4 Runner with tow package the factory hitch connection is 7 flat. I have a...

The Rola rack uses four locking knobs on each upright to secure itself inside the rails on your truck. | does the sliding tracrack fit a 2017 tacoma ?does the rear rack slide forward? | I do have options for you but they do...

I recommend using the Redarc Tow-Pro Elite # RED44FR for your 2019 Ford Transit T250 because it can be installed virtually anywhere and you only need access to the control knob which has a 3/4" diameter. The control knob uses different colors for the LED light on the knob to tell you what is going on so you don't have to try reading a screen plus it gives you have the ability to use either of the popular braking system modes; proportional and user-control (time-delayed). |

The Redarc uses a small control knob you can mount wherever is convenient, and there is even a Universal Mounting Panel for Control Knob # 331-TPSI-001 you can use. | I have 2 questions: I have an ambulance...

I would like a brake controller that is hidden under the dash with a control knob controlling it mounted in the dash. Any help and recommendations are greatly appreciated. | I have a 2004 Dodge Ram 1500 single cab. The build...

The Redarc uses a small control knob you can mount wherever is convenient, and there is even a Universal Mounting Panel for Control Knob # 331-TPSI-001 you can use. | 2018 jeep grand cherokee w/o trailer tow...

The controller knob glows when activated and has a simple 0 - 10 brake sensitivity instead of a complicated system that requires a bunch of setup and playing around to dial in the correct settings. | I have a 2005 Nissan...

Instead of trying to remember codes or read a screen you use the various lights on the control knob to adjust settings and to help you troubleshoot. | I have 2018 forest river grey wolf dry weight 5065 and gross around 7400...

This is definitely the best option because the Elite has a knob which allows you to set the amount of braking power you need - which will be more in the mountains and less on flat surfaces - and pressing that knob also activates the manual override should you need it. |

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

You will have to drill a hole somewhere for the knob to mount (which will be the only visible part once installed) though. | I own a 1987 bronco ii. I recently added a hopkins 7 pin trailer hook up and am looking to add brake...

The knob controls the braking power and also acts as an emergency override. | I have a 2009 Mercedes Benz GL450. My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug. I need to also install brake controller....

The base of the rack could be left on if you wanted to unbolt them from the feet but realistically it would be easier to just remove the feet all together since they install with knobs that don't require tools. | Ill be using...

The main unit of this brake control mounts out of sight so only the knob is visible. The knob controls the braking power and also acts as the manual override. | I have a 2018 Toyota Highlander Hybrid. I have...

I definitely want a proportional controller, and like the look of the tow pro with the knob. Also, is there a cap available to pop into an unused space with the knob on my dash to keep things clean looking?...

As the factory bed length on your truck is 62", I recommend placing the ladder racks 50" or so apart from one another. The knobs located on the brackets inside the bed rail will loosen to reposition the racks then tighten back down once you have them in their desired location. |

Once they are installed, the only visible part will be the control knob. You will either need to drill a small hole in the dash or find a blank switch plate to drill a hole in, but I think it's very worth it. | I have a 2018...

The trailer hitch I recommend for your 2025 Chevy Colorado is the Curt # C78VV, and then for a brake controller I really like the Redarc Tow-Pro Liberty # RED24FR (along with the universal wiring harness # RED69FR) because it can install virtually anywhere and the only part that is visible in your cab is the LED control knob. You'll also want to check to see if you have wiring at your bumper, and if you don't you'll also want to install the Hopkins Wiring Kit # HM11141144. |

If you do indeed have the brake controller adapter, you'll want the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob item # RED43CR. This is a proportional brake controller that automatically adjusts your trailer's braking based on the deceleration of your Jeep. |

Once the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 is installed in the bed of your Toyota Tundra it will be easy to remove by loosening the the 8 knobs, and sliding the racks out of your deck rail system. | I’m...