Result: knobs

If you instead went with the Junior Latch part # L1883 you could then use the knob part # 4PLSP but there isn't a knob solution for the # N1980. | Will the inside doorknob fit or can be used on the N1980 Junior...

| The Inside Knob for Locking Stainless Steel Flush Door Latch # 4PLSP has a 1/4"-20 thread pitch. | Could you please tell me the thread pitch of this knob as i am trying to match it to a latch i have and would like to make...

The Master Lock Electric Trailer Winch, # 2953AT, has a clutch knob on the side of the winch. You will need to loosen the knob in order to allow the winch to free spool. | how do we pull out cable from spool...

I called my contact at Redline and the knob that can be used on the inside of the door is part # 4PLSP. | Can you buy an inside release for this? If so, how can you get one? | The Steel Flush Door Latch, part # N3980 has a threaded...

Another option is basically the same door latch that comes with the knob already in place. It is # L1833. | Does this open from both sides? | The Locking Stainless Steel Flush Door Latch, # L1883, has a threaded hole on the...

Can this latch be opened using the inside release knob when the lock is locked? Or does the lock prevent opening from the inside as well? | Can this latch be opened using the inside release knob when the lock is locked? Or...

Do you have a replacement Knob for a Fulton jack handle I know you offer 2 replace handles...but just wondering if a Knob is available? | Do you have a replacement Knob for a Fulton jack handle I know...

If you need to obtain multiple locking flush door latches then you will want to use the Full Size Locking Steel Flush Door Latch part # L3980 as they all come with the same key. The inside door knob can then be added with the Inside Knob for Locking Stainless Steel Flush Door Latch part # 4PLSP. |

Once you have selected your combination numbers, turn the knob back to the original position in a counterclockwise direction. | how do you set the combination? | I went out into our warehouse and pulled a Master Lock Quantum...

Will this knob fit a 1979 Rockwood pop up tent trailer door | Will this knob fit a 1979 Rockwood pop up tent trailer door | Valterra Keyed Entry Door Knob # L32CS000 is made to fit RV and mobile home doors that are 1-3/8 to...

Basically, the brake will always be applied when powering in and will only be released when you activate the freespooling clutch knob to let the cable out. | Does this winch have a brake for trailering aboat on trailer?. Does...

In order to open the Full Size Locking Steel Flush Door Latch part # L3980 from inside the trailer you will want to use the Inside Knob for Locking Stainless Steel Flush Door Latch part # 4PLSP. | Does this come with interior...

The knob on the male part is right at 19/32 diameter. | The knob on the male part is right at 19/32 diameter. Will this part work? | Since the hole diameter of the Replacement Nylon Socket # DH600S 1/4" I recommend just getting...

Will the 3794DAT fit this hitch considering the little half-round wall thing in front of the twist knob? | Attached is a photo of the hitch on the trailer Im going to rent. It will be parked at a friends house for the weekend...

I also have the Redline Door Latch with Inside Release, # L1833, which is the same latch but with a knob installed on the interior side of the latch to provide an inside release. | Can I get 8 of these latches keyed alike? |...

Is there anyway to temporarily lock this hand nut Knob M6 Low on the M6 carriage bolt of the 593 Wheel-ON Wheel Carrier to prevent theft of the carrier from the car roof? | Is there anyway to temporarily lock this hand nut...

Based on the dimensions you listed the correct replacement latch would be part # L1930 which is a junior size latch. This has the knob on back side of the latch. For one that has a flat back you'd want the part # L1883. | Looking...

We currently do not have any slam latch style latches this will work with since the industry switch to latch style slam latches like the Item # LC54PJ rather than a turn style knob or handle. | Redline Locking Linch Style Door...

This automatically latches when the door is shut and you can open it from the inside with the Knob # 4PLSP. This door latch fits doors up to 1-1/16" thick so it will be perfect for your application! | Hi, I have an older Sidekick...

It does have a stainless spring and rustproof finish. Use the Inside Knob # 4PLSP to allow you to open the latch from inside your trailer. | I am looking for a stainless steel locking paddle latch with an inside release....

This is a power load in only winch, and has a clutch knob that allows freewheeling out for the cable. | I have a 1987 Dodge Pickup and a Ranger Trail boat trailer. I will use this to load 18foot Ranger Bass Boat. Does this...

To open for the inside, I recommend using the Inside Knob for Locking Stainless Steel Flush Door Latch part # 4PLSP. | I am looking at #L1883 and am wondering how far above the flange does the actual latching piece protrude....

It doesn't use an inside release, but you can easily add the # 4PLSP knob. Unfortunately, I don't have any reference material that provides any part numbers or manufacturers for the original latch on your trailer. | I need...

Part # L1883 mounts in an opening that measures 2-5/8 x 3-3/4 and part # L3980 mounts in a hole that measures 3-3/8 x 4-5/8. For the inside knob you can use part # 4PLSP with either of the above. | I need to replace the door...