Result: knobs

Then reinstall the knob and secure the cover. He said you will want to do this on both sides of the bed. | front corner wants to raise up in wind . is there an extra clamp you can put on that corner? 2018 Chevy Colorado |...

Good morning - this item may be the replacement I need for an 05 Gulfstream BT cruiser - the only difference are the two white protruding knobs on the back which mine doesnt have. Can you tell me if these are important and whether this part will indeed work? |

If you wanted to, you could even take it a step further and use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 to really tie it all together. | Hi Guys. I have a 2021 Ford E450...

The Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with Custom Wiring Adapter # 3020-S will give you what you want - a brake controller that is completely out of your way so there is no bulky unit underneath your dash. The Tow-Pro's knob will allow you to install the knob anywhere you like which makes the unit extremely convenient. |

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

If the clamp like the part # EX1034 is tight even after unscrewing knob that would mean it's either seized up and would need to be sprayed with some WD-40 to try and release it or it is some how binding up to the shaft of the threads. |

Hey Thomas, the clamp like the part # EX1034 is tight even after unscrewing knob that would mean it's either seized up and would need to be sprayed with some WD-40 to try and release it, or it is somehow binding up to the shaft of the threads. |

When installed, only a control knob is exposed, getting rid of unnecessary bulk and creating a slick look. | I have a 2020 Dynamax Isata 3 24FWM motorhome that is on a 2018 Mercedes 3500 chassis. I would like your suggestions...

If you turn the control knob all the way to the left just past where the straight line matches up with that diamond shape the back will come off. | How do I replace the bulb in 03001175B? I do not see any disassembly screws....

When it is time to remove this tonneau cover all you have to do is the following: fold the tonneau cover, slide the clamps toward the center of the truck bed, and undo the torque knobs at the bulkhead of the truck bed. It weighs just 35 lbs, so it is not particularly heavy. |

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...

Technically you could adjust the output voltage on any brake controller down to 6 or fewer volts (by adjusting the gain or power output knob) and it will work with the 6 volt brakes that you have without having to add any additional parts or a separate voltage regulator. |

In the future when you do need a trailer brake controller, I highly recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness part # RED63RR with Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob part # 331-TPSI-002. |

I have attached a picture to show the little hook/knob set-up. | My trailer light lens is marked J 2024 on the top portion of the lens cover and DOT ASTI 96 on the bottom of the lens cover. Can I just replace the bulb or do...

At the top of the page the photos show a plastic latch and knob adjustor for the tenion , and at the bottom pictures it shows a metal latch with an automatic spring adjustor ? | Good morning, I am going to buy a tonnaeu cover...

Its like they were designed to cover the front door knob of Ft. Knox?? But were spoiled - we still have a 2005 Arctic Fox truck camper, and several years ago when I replaced the incandescent bulbs with soft white LEDs, I removed the milk white lenses with only a soft squeeze and simply twisted the bulbs out and in. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

When your Silverado 3500 owner's manual refers to the transfer case and its neutral position this refers not to the column shifter but to either a floor-mounted manual shifter or to the dash-mounted electronic transfer case control knob. Both will have 4WD high and low settings indicated by up or down arrows and both will have a neutral position. |