Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

I checked the instructions for the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700, in order to set the brake pressure you must first pull the breakaway pin and then pull out on the knob. Then, rotate to the designed psi, reengage the knob, and reinsert the breakaway pin. |

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

However, with that being said this would not really have an affect on the brake pressure adjustment knob not working correctly. If this is your first time using the system then make sure you pull the knob outward towards you before you turn left or right. |

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

What is the procedure for adjusting the proper pressure using the control knob. I smell hot brakes most of the time. That was not explained | Two days ago 8-20-15 I had an InvisiBrake system installed in motor home. What is...

This brake controller has a super small control knob that you can hide in the dash instead of a brick to hit your knee on. | Do you have a brake controller compatible with a 2019 Lincoln Nautilus? | Hey Gary, For your 2019...

For a brake controller I recommend the Redarc Tow-Pro Liberty # RED52VR with its small dash mounted control knob. The Universal Mounting Panel # 331-TPSI-001 will help to give the control knob a more factory appearance. |

The knob controls the braking power and acts as the manual override. | Im am wanting to add a 7 pin wiring harness to my 2025 bmw x3. Can you suggest one please? I have a trailer with brakes and reverse lights. That is why...

If you would rather not put a knob in your dash we also have the Redarc Tow-Pro Link # RED57AR. | I have a 2026 jeep wrangler willys 4 door with tow package. V6. I would like to install a redarc trailer brake control. I understand...

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

If you have one of those empty spots in the dash, you can use a Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to install the knob. *Since your vehicle does not have the factory tow package you will need to splice in the brake controller. |

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

Pull break away pin. 3. Turn regulator knob to the left until it stops spinning. 4. Turn regulator knob to the right until it stops. 5. | Hi...Found that our even brake wouldn’t hold air and now the compressor...

Yes, according to the owners manual for the 2015 Chevrolet Silverado the "N" on the transfer case knob is to shift the transfer case to Neutral for flat towing your Silverado. | So I have a 2015 4X Chevy with turn dial or....

In the video, Aiden was still able to use it, but I want to mention that the small knob may contact the bumper slightly, which could cause a very small wear spot over time. | The video for the 2019 Honda Odyssey showed that...

Once you have run through the entire flat towing process outlined in the owners manual of your 2022 Chevy Colorado 4WD you'd want to leave the selector in neutral. Look for knob on the dashboard. This will most likely be the last position on the right of the knob and be an "N" that will illuminate when placed in neutral. |