Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

If you instead went with the Junior Latch part # L1883 you could then use the knob part # 4PLSP but there isn't a knob solution for the # N1980. | Will the inside doorknob fit or can be used on the N1980 Junior...

| The Inside Knob for Locking Stainless Steel Flush Door Latch # 4PLSP has a 1/4"-20 thread pitch. | Could you please tell me the thread pitch of this knob as i am trying to match it to a latch i have and would like to make...

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

I called my contact at Redline and the knob that can be used on the inside of the door is part # 4PLSP. | Can you buy an inside release for this? If so, how can you get one? | The Steel Flush Door Latch, part # N3980 has a threaded...

Another option is basically the same door latch that comes with the knob already in place. It is # L1833. | Does this open from both sides? | The Locking Stainless Steel Flush Door Latch, # L1883, has a threaded hole on the...

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

Can this latch be opened using the inside release knob when the lock is locked? Or does the lock prevent opening from the inside as well? | Can this latch be opened using the inside release knob when the lock is locked? Or...

Do you have a replacement Knob for a Fulton jack handle I know you offer 2 replace handles...but just wondering if a Knob is available? | Do you have a replacement Knob for a Fulton jack handle I know...

If you need to obtain multiple locking flush door latches then you will want to use the Full Size Locking Steel Flush Door Latch part # L3980 as they all come with the same key. The inside door knob can then be added with the Inside Knob for Locking Stainless Steel Flush Door Latch part # 4PLSP. |

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

Will this knob fit a 1979 Rockwood pop up tent trailer door | Will this knob fit a 1979 Rockwood pop up tent trailer door | Valterra Keyed Entry Door Knob # L32CS000 is made to fit RV and mobile home doors that are 1-3/8 to...

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

In order to open the Full Size Locking Steel Flush Door Latch part # L3980 from inside the trailer you will want to use the Inside Knob for Locking Stainless Steel Flush Door Latch part # 4PLSP. | Does this come with interior...

The knob on the male part is right at 19/32 diameter. | The knob on the male part is right at 19/32 diameter. Will this part work? | Since the hole diameter of the Replacement Nylon Socket # DH600S 1/4" I recommend just getting...

I also have the Redline Door Latch with Inside Release, # L1833, which is the same latch but with a knob installed on the interior side of the latch to provide an inside release. | Can I get 8 of these latches keyed alike? |...

Based on the dimensions you listed the correct replacement latch would be part # L1930 which is a junior size latch. This has the knob on back side of the latch. For one that has a flat back you'd want the part # L1883. | Looking...