Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

You simply turn the dial to set the gain and press the knob to activate the manual override. Using this brake controller is just as easy as turning on your windshield wipers or headlights. | Im shopping for a new brake controller...

This brake controller has a super small control knob that you can hide in the dash instead of a brick to hit your knee on. | Do you have a brake controller compatible with a 2019 Lincoln Nautilus? | Hey Gary, For your 2019...

I recommend using the Redarc Tow-Pro Elite # RED44FR for your 2019 Ford Transit T250 because it can be installed virtually anywhere and you only need access to the control knob which has a 3/4" diameter. The control knob uses different colors for the LED light on the knob to tell you what is going on so you don't have to try reading a screen plus it gives you have the ability to use either of the popular braking system modes; proportional and user-control (time-delayed). |

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

The controller is operated by a control knob that can be mounted anywhere within the driver's reach. | The brakes on my trailer suddenly stopped working. Being pulled with a 2016 Silverado 2500 HD with an integrated brake controller....

I get a little help by using the controller manual slide knob. Thinking its a bad controller, I installed a prodigy controller, same result, no brakes. | Has worked fine for almost 3 years with a Primus IQ controller, than...

The Inno Tire Hold 2 Bike Platform Rack # INH120 has an anti-rattle knob (no tools!) that you turn once you put it in the hitch. | What would i need for a lightweight tilt platform rack for 2 bikes: I have a ebike and one...

You made a great choice with the # IN25RR as it's easy to install with the twist of a knob, and has ramps so you can just roll your Aventon bikes into position instead of trying to lift them up on the rack. | Will this rack...

The main unit of this brake controller mounts out of sight, so it won't take up additional space in the cab. Only the control knob will be visible in the vehicle. The knob controls the brake power and also acts as the manual override. |

On the other hand, the Tow-Pro Liberty will mount remotely, with the only visible portion of the controller being the control knob that can mount anywhere within the driver's reach. | I need a recommendation for a trailer brake...

The Inno Tire Hold 4 Bike Platform Rack part # INH142 comes with locks for both the hitch and bikes. The hand knob on the front of the rack which is used to tighten and loosen it has a lock core built in that won't let you loosen it, which is required to remove the rack, without the key. |

Although it's not threaded all the way like the original Inno carriage bolt, it will provide enough of a thread to install the bottom knobs without a problem. I have attached a couple of photos to illustrate. | Do you know...

This rack has locking torque knobs that secure the rack to your vehicle. I have included product description links and a video review link below. | What is the distance between bars bar spread. | The 2020 Honda Accord Roof...