Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

If your Kelsey controller is the type that has a load knob on one side and the leveler knob on the other side try making adjustments to the leveler knob. | Have kesley controller when I apply...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

Is this knob the ground connection or what is the difference between the adapators that do or dont have this knob? | I have a 2003 4 Runner with tow package the factory hitch connection is 7 flat. I have a...

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

I recommend using the Redarc Tow-Pro Elite # RED44FR for your 2019 Ford Transit T250 because it can be installed virtually anywhere and you only need access to the control knob which has a 3/4" diameter. The control knob uses different colors for the LED light on the knob to tell you what is going on so you don't have to try reading a screen plus it gives you have the ability to use either of the popular braking system modes; proportional and user-control (time-delayed). |

The Redarc uses a small control knob you can mount wherever is convenient, and there is even a Universal Mounting Panel for Control Knob # 331-TPSI-001 you can use. | I have 2 questions: I have an ambulance...

I would like a brake controller that is hidden under the dash with a control knob controlling it mounted in the dash. Any help and recommendations are greatly appreciated. | I have a 2004 Dodge Ram 1500 single cab. The build...

The Redarc uses a small control knob you can mount wherever is convenient, and there is even a Universal Mounting Panel for Control Knob # 331-TPSI-001 you can use. | 2018 jeep grand cherokee w/o trailer tow...

The controller knob glows when activated and has a simple 0 - 10 brake sensitivity instead of a complicated system that requires a bunch of setup and playing around to dial in the correct settings. | I have a 2005 Nissan...

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

Instead of trying to remember codes or read a screen you use the various lights on the control knob to adjust settings and to help you troubleshoot. | I have 2018 forest river grey wolf dry weight 5065 and gross around 7400...

This is definitely the best option because the Elite has a knob which allows you to set the amount of braking power you need - which will be more in the mountains and less on flat surfaces - and pressing that knob also activates the manual override should you need it. |

The Inno Tire Hold 2 Bike Platform Rack # INH120 has an anti-rattle knob (no tools!) that you turn once you put it in the hitch. | What would i need for a lightweight tilt platform rack for 2 bikes: I have a ebike and one...

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

You made a great choice with the # IN25RR as it's easy to install with the twist of a knob, and has ramps so you can just roll your Aventon bikes into position instead of trying to lift them up on the rack. | Will this rack...